Since nickel and copper are combined to form Monel 400, this material's characteristics are similar to those of nickel- and copper-based alloys. Astm B164 Uns N04400 Monel 400 Fasteners provide excellent corrosion resistance, weldability, and strength. The Monel 400 Socket Head Cap Screws are known to display a decreased rate of corrosion in either fast flowing brackish water or rapidly flowing seawater, speaking of the alloy's corrosion resistant capabilities.
The Monel 400 Bolts and Nuts can resist corrosion in freshwater sources, especially if the problem is stress-related cracking, or SCC. In marine situations, the Alloy UNS N04400 Bolts' performance and usefulness are highly valued. Seawater has an average salinity of 3.5%, which is corrosive to numerous common stainless steel alloys. However, the alloy of Monel 400 Fasteners, which contains copper, allows for its usage in such conditions.
In crude oil stills, the 2.4360 (alloy 400) Bolts continue to work well. The face-centered cubic crystalline microstructure of ASTM F467 400 Monel, a strong alloy, leads to extremely high ductility. The alloy's ductility, like that of the majority of alloys with FCC crystalline structures, allows for good formability into items like Monel 400 Hex Nuts.
Check Comparision of Monel 400 Fasteners price with inconel 600 Fasteners price list
| Monel 400 Fasteners Standard | IS, ANSI, ASTM DIN, ISO, JIS, GB, ASME, BS, UNI and all International Standards |
|---|---|
| Threads: | BSF, UNF METRIC, UNC, BSW or as required |
| Monel 400 Fasteners Standard | ANSI – American National Standards Institute
DIN:DIN 933, DIN 931, DIN 970, DIN 934 UTS – Unified Thread Standard : UNF, NPT, NPTF, UNS, UNC, UNEF ISO – International Organization for Standardization ISO 4033, : ISO 4032, JIS standards |
| Monel 400 Fasteners/ Bolts Size | M10, M4, M16, M36 M2.5, M6, M30, M12, M8, M14, M2, M3, M20, M24, M5 to M160 |
| Length | 3 mm to 200 mm |
| Monel 400 Fasteners Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe etc |
| Test Certificate | as per EN 10204 / 3.1 Manufacturer Test Certificate |
| Finishing | Zinc white Fasteners , (yellow, black, blue), black oxide Fasteners ,
Dacroment Fasteners , Geometry Fasteners , plated zinc-nickel Fasteners , anodizing Fasteners , nickel plated Fasteners , Stainless steel: Passivated Self-Colour, Bright Zinc Plated (BZP) Fasteners , Hot Dip Galvanised (HDG) Fasteners , Sherardized Fasteners , Stainless Steel Fasteners , some special one like DACROMET and Mechanically Applied coating Fasteners |
| raw materials of Source | JSPL, Usha Martin, Tata Steel, Mukund Steel, RINL, Dhamm Steel etc. |
| Monel 400 Fasteners Form | Square, Hex, Threading as per Gauge, Round Etc. |
| Process of Production | M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element |
| Monel 400 Fasteners Surface Coating |
|
| Packing | IN BULK: pallet, canton, carton / Small Boxs / pallet or customer request |
| Description | Per Unit (INR) | Price in USD | Price in EURO |
|---|---|---|---|
| Hex Head Bolt + 1 Flat Washer + 1 Spring Washer Material : Monel Alloy 400 fasteners | 764 | 10.32 | 8.65 |
| 66 A-nuts/bolts/screws/washer Made Of Monel 400 Stud Bolt W/2 Heavy Hex Nut1-1/4x | 5,704 | 77.02 | 64.58 |
| 66 A-nuts/bolts/screws/washer Made Of Monel 400 Stud Bolt W/2 Heavy Hex Nut 1/2x9 | 469 | 6.33 | 5.31 |
| 66 A-nuts/bolts/screws/washer Made Of Monel 400 Stud Bolt W/2 Heavy Hex Nut5/8x10 | 738 | 9.97 | 8.36 |
| 66 A-nuts/bolts/screws/washer Made Of Monel 400 Stud Bolt W/2 Heavy Hex Nut1x170m | 2,942 | 39.73 | 33.31 |
| 66 A-nuts/bolts/screws/washer Made Of Monel 400 Stud Bolt W/2 Heavy Hex Nut 5/8x8 | 732 | 9.88 | 8.29 |
| Physical Properties | Metric | English |
|---|---|---|
| Density | 8.8 g/cc | 0.318 lb/in³ |
| Electrical Properties | |||
|---|---|---|---|
| Electrical Resistivity | 5.47e-005 ohm-cm | 5.47e-005 ohm-cm | |
| Curie Temperature | 35 °C | 95 °F | Range is 20-50°C |
Monel 400 Bolt Coatings |
|||||
|---|---|---|---|---|---|
Mirror Buffed |
Hot Dipped Galvanizing |
Epoxy Coating |
Electro Polished |
Passivation |
|
Teflon Coating |
Oxidized |
Zinc Plating |
Chrome Plating |
||
| Monel Thermal Properties | |||
|---|---|---|---|
| CTE, linear 20°C | 13.9 µm/m-°C | 7.72 µin/in-°F | 20-100°C |
| Heat Capacity | 0.427 J/g-°C | 0.102 BTU/lb-°F | |
| Thermal Conductivity | 21.8 W/m-K | 151 BTU-in/hr-ft²-°F | |
| Melting Point | 1300 – 1350 °C | 2370 – 2460 °F | |
| Solidus | 1300 °C | 2370 °F | |
| Liquidus | 1350 °C | 2460 °F | |
APPROX. WEIGHT IN KGS FOR 100 NOS |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Monel Fasteners SIZE | PLAIN PUNCHED WASHER IS:2016 |
HEAVY WASHER IS:6610 |
MACHINED WASHER IS:2016 |
SQUARE TAPER WASHERS | SPRING WASHER FLAT SECTION IS:3063-72 | SPRING WASHER SQUARE SECTION IS:6735-72 DIN : 7980 |
Size (Inches) | PLAIN PUNCHED WASHER BS:3410 TABLE 7 |
|||
| MACHINED | HIGH STRENGTH FRICTION GRIP |
||||||||||
| FOR CHANNELS IS:5372-75 |
FOR I-BEAM IS:5374-75 |
TYPE-B (CHANNELS) IS : 6649-85 |
TYPE-C ( I-BEAMS ) IS : 6649-85 |
||||||||
| M-3 | 0.01 | 0.01 | |||||||||
| M-4 | 0.02 | 0.02 | |||||||||
| M-5 | 0.04 | 0.04 | 0.03 | 0.03 | |||||||
| M-6 | 0.11 | 0.11 | 0.08 | 0.04 | 1/4″ | 0.21 | |||||
| M-8 | 0.20 | 0.21 | 1.10 | 1.20 | 0.16 | 0.11 | 5/16″ | 0.35 | |||
| M-10 | 0.39 | 1.60 | 0.40 | 1.00 | 1.10 | 0.25 | 0.20 | 3/8″ | 0.48 | ||
| M-12 | 0.58 | 1.90 | 0.62 | 2.00 | 2.20 | 2.00 | 1.80 | 0.38 | 0.23 | 1/2″ | 1.07 |
| M-14 | 0.82 | 0.60 | 0.38 | ||||||||
| M-16 | 1.06 | 2.90 | 1.13 | 3.40 | 3.75 | 9.00 | 8.50 | 0.89 | 0.59 | 5/8″ | 1.85 |
| M-18 | 1.27 | 0.97 | 0.66 | ||||||||
| M-20 | 1.64 | 4.40 | 1.72 | 5.80 | 6.70 | 8.50 | 8.00 | 1.52 | 1.23 | 3/4″ | 2.91 |
| M-22 | 1.75 | 7.50 | 7.00 | 1.65 | 1.36 | 7/8″ | 4.27 | ||||
| M-24 | 3.11 | 6.30 | 3.30 | 13.50 | 16.00 | 6.50 | 6.00 | 2.62 | 1.81 | 1″ | 6.13 |
| M-27 | 3.94 | 8.00 | 4.23 | 12.50 | 15.00 | 12.00 | 11.50 | 2.87 | 2.06 | 1.1/8″ | 7.69 |
| M-30 | 5.05 | 10.10 | 5.36 | 16.50 | 18.70 | 17.50 | 16.00 | 4.43 | 3.20 | 1.1/4″ | 9.90 |
| M-33 | 7.10 | 12.00 | 7.54 | 21.00 | 23.50 | 23.00 | 22.50 | 6.30 | 3.50 | ||
| M-36 | 8.73 | 14.60 | 9.20 | 25.50 | 29.20 | 26.50 | 26.00 | 6.73 | 5.25 | 1.1/2″ | 17.24 |
| M-39 | 12.60 | 16.70 | 13.30 | 28.30 | 34.50 | 7.17 | 5.61 | ||||
| M-42 | 17.50 | 20.10 | 18.30 | 11.10 | 8.00 | ||||||
| M-45 | 21.20 | 22.20 | 22.00 | 11.70 | 8.53 | ||||||
| M-48 | 28.40 | 26.00 | 29.40 | 12.30 | 9.00 | 2″ | 27.78 | ||||
| M-52 | 31.90 | 33.00 | 18.20 | ||||||||
| M-56 | 47.90 | 19.30 | |||||||||
| M-60 | 51.60 | 20.30 | |||||||||
| M-64 | 55.40 | 21.80 | |||||||||
| M-68 | 57.40 | ||||||||||
| M-72 | 63.40 | 24.00 | |||||||||
| Monel Fasteners Class 150 Flanges ASME B16.5 (Stud bolt sizes) | Length of Stud Bolts | |||||||
|---|---|---|---|---|---|---|---|---|
| NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
| 1/2 | 3 1/2 | 2 3/8 | 5/8 | 4 | 1/2 | 2 1/4 | – | |
| 3/4 | 3 7/8 | 2 3/4 | 5/8 | 4 | 1/2 | 2 1/2 | – | |
| 1 | 4 1/4 | 3 1/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
| 1 1/4 | 4 5/8 | 3 1/2 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
| 1 1/2 | 5 | 3 7/8 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
| 2 | 6 | 4 3/4 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
| 2 1/2 | 7 | 5 1/2 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
| 3 | 7 1/2 | 6 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
| 3 1/2 | 8 1/2 | 7 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 4 | 9 | 7 1/2 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 5 | 10 | 8 1/2 | 7/8 | 8 | 3/4 | 3 3/4 | 4 1/4 | |
| 6 | 11 | 9 1/2 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
| 8 | 13 1/2 | 11 3/4 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
| 10 | 16 | 14 3/4 | 1 | 12 | 7/8 | 4 1/2 | 5 | |
| 12 | 19 | 17 | 1 | 12 | 7/8 | 4 3/4 | 5 1/4 | |
| 14 | 21 | 18 3/4 | 1 1/8 | 12 | 1 | 5 1/4 | 5 3/4 | |
| 16 | 23 1/2 | 21 1/4 | 1 1/8 | 16 | 1 | 5 1/4 | 5 3/4 | |
| 18 | 25 | 22 3/4 | 1 1/4 | 16 | 1 1/8 | 5 3/4 | 6 1/4 | |
| 20 | 27 1/2 | 25 | 1 1/4 | 20 | 1 1/8 | 6 1/4 | 6 3/4 | |
| 24 | 32 | 29 1/2 | 1 1/4 | 20 | 1 1/4 | 6 3/4 | 7 1/4 | |
| Monel Fasteners Class 300 Flanges ASME B16.5 | Length of Stud Bolts | |||||||
|---|---|---|---|---|---|---|---|---|
| NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
| 1/2 | 3 3/4 | 2 5/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
| 3/4 | 4 5/8 | 3 1/4 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
| 1 | 4 7/8 | 3 1/2 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
| 1 1/4 | 5 1/4 | 3 7/8 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
| 1 1/2 | 6 1/8 | 4 1/2 | 7/8 | 4 | 3/4 | 3 1/2 | 4 | |
| 2 | 6 1/2 | 5 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 2 1/2 | 7 1/2 | 5 7/8 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
| 3 | 8 1/4 | 6 5/8 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
| 3 1/2 | 9 | 7 1/4 | 7/8 | 8 | 3/4 | 4 1/4 | 5 | |
| 4 | 10 | 7 7/8 | 7/8 | 8 | 3/4 | 4 1/2 | 5 | |
| 5 | 11 | 9 1/4 | 7/8 | 8 | 3/4 | 4 3/4 | 5 1/4 | |
| 6 | 12 1/2 | 10 5/8 | 7/8 | 12 | 3/4 | 4 3/4 | 5 1/2 | |
| 8 | 15 | 13 | 1 | 12 | 7/8 | 5 1/2 | 6 | |
| 10 | 17 1/2 | 15 1/4 | 1 1/8 | 16 | 1 | 6 1/4 | 6 3/4 | |
| 12 | 20 1/2 | 17 3/4 | 1 1/4 | 16 | 1 1/8 | 6 3/4 | 7 1/4 | |
| 14 | 23 | 20 1/4 | 1 1/4 | 20 | 1 1/8 | 7 | 7 1/2 | |
| 16 | 25 1/2 | 22 1/2 | 1 3/8 | 20 | 1 1/4 | 7 1/2 | 8 | |
| 18 | 28 | 24 3/4 | 1 3/8 | 24 | 1 1/4 | 7 3/4 | 8 1/4 | |
| 20 | 30 1/2 | 27 | 1 3/8 | 24 | 1 1/4 | 8 | 8 3/4 | |
| 24 | 36 | 32 | 1 5/8 | 24 | 1 1/2 | 9 | 10 | |
| Monel Fasteners Sizes | 3/8-16 x 1-1/4 | 3/8-16 x 1 |
| 1/2-13 x 2 | 1/4-20 x 1 | |
| 1/4-20 x 1 | 3/8-16 x 1-1/4 | |
| 1/4-20 x 3/4 | 5/8-11 x 2 | |
| 1/2-13 x 2 | 3/8-16 x 1-1/2 | |
| 3/8-16 x 1-1/2 | 3/8-16 x 2 | |
| 1/2-13 x 1-1/2 | 3/8-16 x 1 | |
| 1/2-13 x 1-1/2 | 5/8-11 x 2-1/2 | |
| 5/8-11 x 2 | 5/16-18 x 1 | |
| 3/8-16 x 1 | 1/4-20 x 3/4 |
| NPS | DIA bolts (in) |
Length RF |
Length RTJ |
Number of bolts |
|---|---|---|---|---|
| 1/2 | 1/2 | 55 | 4 | |
| 3/4 | 1/2 | 65 | 4 | |
| 1 | 1/2 | 65 | 75 | 4 |
| 1¼ | 1/2 | 70 | 85 | 4 |
| 1½ | 1/2 | 70 | 85 | 4 |
| 2 | 5/8 | 85 | 95 | 4 |
| 2½ | 5/8 | 90 | 100 | 4 |
| 3 | 5/8 | 90 | 100 | 4 |
| 3½ | 5/8 | 90 | 100 | 8 |
| 4 | 5/8 | 90 | 100 | 8 |
| 5 | 3/4 | 95 | 110 | 8 |
| 6 | 3/4 | 100 | 115 | 8 |
| 8 | 3/4 | 110 | 120 | 8 |
| 10 | 7/8 | 115 | 125 | 12 |
| 12 | 7/8 | 120 | 135 | 12 |
| 14 | 1 | 135 | 145 | 12 |
| 16 | 1 | 135 | 145 | 16 |
| 18 | 1.1/8 | 145 | 160 | 16 |
| 20 | 1.1/8 | 160 | 170 | 20 |
| 24 | 1¼ | 170 | 185 | 20 |
| MM THREADS AS PER IS 1363/67 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Fasteners APPROXIMATE WEIGHT IN KGS FOR 100 NOS | ||||||||||
| LENGTH in milimeter | DIAMETER | |||||||||
| M 5 | M 6 | M 8 | M 10 | M 12 | M 14 | M 16 | M 18 | M 20 | M 22 | |
| 16 | 0.448 | 0.743 | 1.590 | 3.211 | ||||||
| 20 | 0.598 | 0.812 | 1.711 | 3.411 | 4.892 | |||||
| 25 | 0.660 | 0.897 | 1.871 | 3.660 | 5.252 | 8.170 | ||||
| 30 | 0.737 | 1.010 | 2.070 | 3.912 | 5.574 | 9.690 | 10.707 | 18.657 | ||
| 35 | 0.804 | 1.120 | 2.271 | 4.223 | 5.974 | 10.000 | 11.416 | 16.026 | 19.608 | |
| 40 | 0.881 | 1.230 | 2.470 | 4.533 | 6.410 | 10.288 | 12.107 | 16.667 | 20.747 | |
| 45 | 0.958 | 1.340 | 2.671 | 4.840 | 6.859 | 10.504 | 12.821 | 17.241 | 21.739 | |
| 50 | 1.030 | 1.450 | 2.870 | 5.155 | 7.299 | 11.261 | 13.624 | 17.857 | 22.727 | 28.409 |
| 55 | 1.560 | 3.071 | 5.464 | 7.740 | 11.628 | 14.409 | 18.868 | 23.810 | 30.120 | |
| 60 | 1.670 | 3.270 | 5.774 | 8.183 | 12.255 | 15.244 | 20.000 | 25.126 | 32.051 | |
| 65 | 1.781 | 3.472 | 6.083 | 8.621 | 12.626 | 16.026 | 21.008 | 26.455 | 34.014 | |
| 70 | 1.890 | 3.671 | 6.394 | 9.058 | 12.987 | 16.835 | 22.124 | 27.778 | 35.461 | |
| 75 | 2.000 | 3.873 | 6.702 | 9.506 | 13.228 | 17.606 | 23.256 | 29.070 | 39.063 | |
| 80 | 2.111 | 4.072 | 7.013 | 10.000 | 13.889 | 18.248 | 24.510 | 30.303 | 40.000 | |
| 90 | 4.472 | 7.634 | 10.917 | 14.925 | 19.841 | 26.042 | 33.113 | 41.667 | ||
| 100 | 4.873 | 8.251 | 11.820 | 16.340 | 21.459 | 27.778 | 35.714 | 46.296 | ||
| 110 | 8.881 | 12.723 | 17.730 | 23.041 | 31.250 | 38.168 | 47.170 | |||
| 120 | 9.506 | 13.624 | 18.797 | 24.631 | 32.895 | 40.984 | 50.000 | |||
| 130 | 10.101 | 14.535 | 20.000 | 26.316 | 34.722 | 43.478 | 52.632 | |||
| 140 | 10.707 | 15.432 | 20.833 | 27.933 | 35.461 | 46.296 | 55.556 | |||
| 150 | 11.312 | 16.340 | 22.222 | 29.412 | 37.594 | 48.544 | 58.824 | |||
| 160 | 11.905 | 17.241 | 24.272 | 31.056 | 40.984 | 50.505 | 61.728 | |||
| 170 | 12.500 | 18.116 | 32.680 | 53.191 | 64.935 | |||||
| 180 | 13.123 | 19.011 | 26.882 | 34.247 | 55.556 | 67.568 | ||||
| 190 | 13.736 | 19.920 | 35.971 | 58.140 | 70.423 | |||||
| 200 | 14.327 | 20.833 | 29.586 | 37.594 | 49.020 | 60.976 | 73.529 | |||
| 220 | 15.528 | 22.624 | 40.650 | 65.789 | 79.365 | |||||
| 240 | 16.722 | 24.510 | 43.860 | 71.429 | 84.746 | |||||
| 250 | 17.301 | 25.381 | 45.455 | 74.627 | 87.719 | |||||
| 260 | 17.921 | 26.316 | 47.170 | 76.923 | 90.909 | |||||
| 280 | 19.157 | 28.090 | 50.505 | 81.967 | 98.039 | |||||
| 300 | 20.325 | 29.940 | 53.763 | 87.719 | 104.167 | |||||
| 320 | 31.646 | 56.818 | 92.593 | |||||||
| 340 | 33.557 | 60.241 | 98.039 | |||||||
| 360 | 35.211 | 63.291 | 104.167 | |||||||
| 380 | 37.037 | 66.667 | 108.696 | |||||||
| 400 | 39.063 | 69.444 | 113.636 | |||||||
| Monel 400 Hexagon Bolts / Set Screws | Monel 400 Stud Bolts | Monel 400 Hexagon Nuts | Monel 400 Socket Cap screws |
|---|---|---|---|
| DIN 931 | BS4882 | DIN 934 | DIN 912 |
| DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
| BS 1768 | BS 1769 | DIN 7984 | |
| UNI 5731 | BS 1083 | ANSI B18.3 | |
| UNI 5739 | BS 3692 | ISO 4762 | |
| ISO 4014 | ISO 4032 | UNI 5931 | |
| ISO 4017 | ISO 4033 | BS 2470 | |
| BS 1769 | ANSI B18.2.2 | BS 4168 | |
| BS 3692 | |||
| ANSI B18.2.1 |
| Monel 400 Socket & Slotted Set Screws | Monel 400 Socket & Slotted Countersunk Screws | Monel 400 Studs | Monel 400 Washers |
|---|---|---|---|
| DIN 913 | DIN 963 | DIN 938 | DIN 125 |
| DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
| DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
| DIN 916 | BS 1981 | BS 4439 | BS 3410 |
| DIN 551 | BS 483 | BS 2693 | |
| DIN 553 | BS 2470 | Spring Washers | |
| DIN 438 | DIN 127 | ||
| BS 4168 | BS 4464 | ||
| BS 1802 |
Element
|
Content (%)
|
|---|---|
Nickel, Ni
|
63.00 min
|
Silicon, Si
|
0.5 max
|
Carbon, C
|
0.3 max
|
Sulphur, S
|
0.024
|
Copper, Cu
|
28-34
|
Iron, Fe
|
2.5 max
|
Manganese, Mn
|
2 max
|
Properties
|
Metric
|
Imperial
|
|---|---|---|
Tensile strength(annealed)
|
517-620 MPa
|
75-90 ksi
|
Yield strength
|
172-345 MPa
|
25-50 ksi
|
Modulus of elasticity
|
179 GPa
|
26000 ksi
|
Poisson’s ratio
|
0.32
|
0.32
|
STANDARD |
WERKSTOFF NR. |
ASTM |
UNS |
BS |
GOST |
AFNOR |
JIS |
EN |
|---|---|---|---|---|---|---|---|---|
Monel 400 Fasteners |
2.4360 |
F467 |
N04400 |
NA 13 |
МНЖМц 28-2,5-1,5 |
NU-30M |
NW 4400 |
NiCu30Fe |
|
|
MM THREADS AS PER IS 1363/67 |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Fasteners APPROXIMATE WEIGHT IN KGS FOR 100 NOS |
||||||||||
Monel 400 LENGTH |
D I A M E T E R |
|||||||||
M 5 |
M 6 |
M 8 |
M 10 |
M 12 |
M 14 |
M 16 |
M 18 |
M 20 |
M 22 |
|
| 16 mm | 0.448 | 0.743 | 1.590 | 3.211 | ||||||
| 20 mm | 0.598 | 0.812 | 1.711 | 3.411 | 4.892 | |||||
| 25 mm | 0.660 | 0.897 | 1.871 | 3.660 | 5.252 | 8.170 | ||||
| 30 mm | 0.737 | 1.010 | 2.070 | 3.912 | 5.574 | 9.690 | 10.707 | 18.657 | ||
| 35 mm | 0.804 | 1.120 | 2.271 | 4.223 | 5.974 | 10.000 | 11.416 | 16.026 | 19.608 | |
| 40 mm | 0.881 | 1.230 | 2.470 | 4.533 | 6.410 | 10.288 | 12.107 | 16.667 | 20.747 | |
| 45 mm | 0.958 | 1.340 | 2.671 | 4.840 | 6.859 | 10.504 | 12.821 | 17.241 | 21.739 | |
| 50 mm | 1.030 | 1.450 | 2.870 | 5.155 | 7.299 | 11.261 | 13.624 | 17.857 | 22.727 | 28.409 |
| 55 mm | 1.560 | 3.071 | 5.464 | 7.740 | 11.628 | 14.409 | 18.868 | 23.810 | 30.120 | |
| 60 mm | 1.670 | 3.270 | 5.774 | 8.183 | 12.255 | 15.244 | 20.000 | 25.126 | 32.051 | |
| 65 mm | 1.781 | 3.472 | 6.083 | 8.621 | 12.626 | 16.026 | 21.008 | 26.455 | 34.014 | |
| 70 mm | 1.890 | 3.671 | 6.394 | 9.058 | 12.987 | 16.835 | 22.124 | 27.778 | 35.461 | |
| 75 mm | 2.000 | 3.873 | 6.702 | 9.506 | 13.228 | 17.606 | 23.256 | 29.070 | 39.063 | |
| 80 mm | 2.111 | 4.072 | 7.013 | 10.000 | 13.889 | 18.248 | 24.510 | 30.303 | 40.000 | |
| 90 mm | 4.472 | 7.634 | 10.917 | 14.925 | 19.841 | 26.042 | 33.113 | 41.667 | ||
| 100 mm | 4.873 | 8.251 | 11.820 | 16.340 | 21.459 | 27.778 | 35.714 | 46.296 | ||
| 110 mm | 8.881 | 12.723 | 17.730 | 23.041 | 31.250 | 38.168 | 47.170 | |||
| 120 mm | 9.506 | 13.624 | 18.797 | 24.631 | 32.895 | 40.984 | 50.000 | |||
| 130 mm | 10.101 | 14.535 | 20.000 | 26.316 | 34.722 | 43.478 | 52.632 | |||
| 140 mm | 10.707 | 15.432 | 20.833 | 27.933 | 35.461 | 46.296 | 55.556 | |||
| 150 mm | 11.312 | 16.340 | 22.222 | 29.412 | 37.594 | 48.544 | 58.824 | |||
| 160 mm | 11.905 | 17.241 | 24.272 | 31.056 | 40.984 | 50.505 | 61.728 | |||
| 170 mm | 12.500 | 18.116 | 32.680 | 53.191 | 64.935 | |||||
| 180 mm | 13.123 | 19.011 | 26.882 | 34.247 | 55.556 | 67.568 | ||||
| 190 mm | 13.736 | 19.920 | 35.971 | 58.140 | 70.423 | |||||
| 200 mm | 14.327 | 20.833 | 29.586 | 37.594 | 49.020 | 60.976 | 73.529 | |||
| 220 mm | 15.528 | 22.624 | 40.650 | 65.789 | 79.365 | |||||
| 240 mm | 16.722 | 24.510 | 43.860 | 71.429 | 84.746 | |||||
| 250 mm | 17.301 | 25.381 | 45.455 | 74.627 | 87.719 | |||||
| 260 mm | 17.921 | 26.316 | 47.170 | 76.923 | 90.909 | |||||
| 280 mm | 19.157 | 28.090 | 50.505 | 81.967 | 98.039 | |||||
| 300 mm | 20.325 | 29.940 | 53.763 | 87.719 | 104.167 | |||||
| 320 mm | 31.646 | 56.818 | 92.593 | |||||||
| 340 mm | 33.557 | 60.241 | 98.039 | |||||||
| 360 mm | 35.211 | 63.291 | 104.167 | |||||||
| 380 mm | 37.037 | 66.667 | 108.696 | |||||||
| 400 mm | 39.063 | 69.444 | 113.636 | |||||||
| Monel 400 Fasteners Size | Monel 400 Finished Hex | Monel 400 Heavy Hex | Monel 400 Finished Jam | Monel 400 Heavy Hex Jam | Monel 400 Square | Monel 400 Heavy Square |
| 1⁄2“ Nut | 3.75 | 6.54 | 2.62 | 4.00 | 5.78 | 7.87 |
| 5⁄8“ Nut | 7.33 | 11.9 | 4.93 | 6.96 | 10.8 | 14.3 |
| 3⁄4“ Nut | 11.9 | 19.3 | 7.70 | 11.0 | 15.4 | 23.5 |
| 7⁄8“ Nut | 19.0 | 29.7 | 12.0 | 16.7 | 24.5 | 36.2 |
| 1″ Nut | 28.3 | 42.5 | 17.6 | 23.5 | 36.3 | 51.5 |
| 11⁄8“ Nut | 40.3 | 59.2 | 24.7 | 32.4 | 52.5 | 72.4 |
| 11⁄4“ Nut | 54.3 | 78.6 | 36.1 | 45.8 | 70.6 | 95.5 |
| 13⁄8“ Nut | 73.0 | 102 | 47.9 | 59.3 | 94.5 | 125.0 |
| 11⁄2“ Nut | 94.3 | 131 | 60.9 | 74.8 | 122 | 161 |
| 15⁄8“ Nut | 162 | 91.6 | ||||
| 13⁄4“ Nut | 151 | 204 | 100 | 114 | ||
| 17⁄8“ Nut | 241 | 134 | ||||
| 2″ Nut | 224 | 299 | 140 | 165 | ||
| 21⁄4“ Nut | 419 | 227 | ||||
| 21⁄2“ Nut | 564 | 332 | ||||
| 23⁄4“ Nut | 738 | 429 | ||||
| 3″ Nut | 950 | 545 | ||||
| 31⁄4“ Nut | 1194 | 651 | ||||
| 31⁄2“ Nut | 1526 | 851 | ||||
| 33⁄4“ Nut | 1812 | 1005 | ||||
| 4″ Nut | 2180 | 1200 |
