The word "duplex" is derived from the dual microstructure that these stainless steels' alloys include. Due to the material's excellent corrosion resistant qualities and combination of improved toughness and very high strength, 2205 duplex steel fasteners are preferred. Ideally, applications that require strong corrosion resistance benefit from the usage of 2205 Duplex Stainless Fasteners.
The alloy's chromium and nickel chemical make-up provides the Duplex Stainless Steel Fasteners with exceptional resistance to oxidative corrosion, pitting, and crevice corrosion. Furthermore, the alloy could be employed at high temperatures because nickel is a component of its chemical composition. Despite being exposed to applications where the temperature reaches 300°C, the 2205 duplex stainless steel bolts exhibit resistance to creep at high temperatures and maintain their strength.
Many Duplex Fasteners Manufacturers, however, forbid utilising the fasteners at this temperature since the material goes through a ductile to brittle transition phase. The duplex 2205 threaded rod loses its ductility and brittleness at this stage. Due to material breakdown brought on by brittle alloy, duplex stainless fasteners would become worthless. Even so, there is a solution for this issue. The Duplex 2205 Hex Bolts' ductility might be increased by solution annealing.
Compare Duplex 2205 Fasteners price with inconel 625 Bolts price list
| Standard | IS, ANSI, ASTM DIN, ISO, JIS, GB, ASME, BS, UNI and all International Standards |
|---|---|
| Threads: | BSF, UNF METRIC, UNC, BSW or as required |
| Standard | ANSI – American National Standards Institute
DIN:DIN 933, DIN 931, DIN 970, DIN 934 UTS – Unified Thread Standard : UNF, NPT, NPTF, UNS, UNC, UNEF ISO – International Organization for Standardization ISO 4033, : ISO 4032, JIS standards |
| Fasteners/ Bolts Size | M10, M4, M16, M36 M2.5, M6, M30, M12, M8, M14, M2, M3, M20, M24, M5 to M160 |
| Length | 3 mm to 200 mm |
| Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe etc |
| Test Certificate | as per EN 10204 / 3.1 Manufacturer Test Certificate |
| Finishing | Zinc white, (yellow, black, blue), black oxide,
Dacroment, Geometry, plated zinc-nickel, anodizing, nickel plated, Stainless steel: Passivated Self-Colour, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, Stainless Steel, some special one like DACROMET and Mechanically Applied coating |
| raw materials of Source | JSPL, Usha Martin, Tata Steel, Mukund Steel, RINL, Dhamm Steel etc. |
| Form | Square, Hex, Threading as per Gauge, Round Etc. |
| Process of Production | M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element |
| Surface Coating |
|
| Packing | IN BULK: pallet, canton, carton / Small Boxs / pallet or customer request |
| Description | Per Unit (INR) | Price in USD | Price in EURO |
|---|---|---|---|
| Bc0.313-2,carriage Bolt,0,313-18x2, Duplex: Duplex (2205), Round Head Square Neck Carriage Bolt; Full Thread Unc 2a, Pa | 368 | 5.00 | 4.17 |
| Bc0.50-3, Carriage Bolt, 0,5-13x3, Duplex: Duplex (2205), Round Head Square Neck Carriage Bolt; Full Thread Unc 2a, Pas | 458 | 6.22 | 5.20 |
| Bc0.625-3.25,carriage Bolt,0,625-11x3,25,duplex: Duplex (2205), Round Head Square Neck Carriage Bolt; Full Thread Unc | 539 | 7.32 | 6.11 |
| Bc0.375-2,carriage Bolt,.,375-16x2, Duplex: Duplex (2205), Round Head Square Neck Carriage Bolt; Full Thread Unc 2a, P | 336 | 4.56 | 3.81 |
| Bc0.75-4.25,carriage Bolt,0,75-10x4,25,duplex: Duplex (2205), Round Head Square Neck Carriage Bolt; Full Thread Unc 2a | 626 | 8.50 | 7.10 |
| 2205 Duplex Ss Hex Bolt, Nut & Washers (Other Screws And Bolts W/n With Nuts Orwashers Threaded) | 353 | 4.79 | 4.00 |
Nominal Size or Basic Major Thread Diameter |
F |
G |
H |
||||||
|---|---|---|---|---|---|---|---|---|---|
Width Across Flats |
Width Across Corners |
Thickness |
|||||||
Basic |
Max |
Min |
Max |
Min |
Basic |
Max |
Min |
||
1/4 |
.2500 |
7/16 |
.438 |
.428 |
.505 |
.488 |
7/32 |
.226 |
.212 |
5/16 |
.3125 |
1/2 |
.500 |
.489 |
.577 |
.557 |
17/64 |
.273 |
.258 |
3/8 |
.3750 |
9/16 |
.562 |
.551 |
.650 |
.628 |
21/64 |
.337 |
.479 |
7/16 |
.4375 |
11/16 |
.688 |
.675 |
.794 |
.768 |
3/8 |
.385 |
.365 |
1/2 |
.5000 |
3/4 |
.750 |
.736 |
.866 |
.840 |
7/16 |
.448 |
.427 |
9/16 |
.5625 |
7/8 |
.875 |
.861 |
1.010 |
.982 |
31/64 |
.496 |
.473 |
5/8 |
.6250 |
15/16 |
.938 |
.922 |
1.083 |
1.051 |
35/64 |
.559 |
.535 |
3/4 |
.7500 |
1-1/8 |
1.125 |
1.088 |
1.299 |
1.240 |
41/64 |
.665 |
.617 |
7/8 |
.8750 |
1-5/16 |
1.312 |
1.269 |
1.516 |
1.447 |
3/4 |
.776 |
.724 |
1 |
1.0000 |
1-1/2 |
1.500 |
1.450 |
1.732 |
1.653 |
55/64 |
.887 |
.831 |
1-1/8 |
1.1250 |
1-11/16 |
1.688 |
1.631 |
1.949 |
1.859 |
31/32 |
.999 |
.939 |
1-3/8 |
1.3750 |
2-1/16 |
2.062 |
1.994 |
2.382 |
2.273 |
1-11/64 |
1.206 |
1.138 |
1-1/2 |
1.500 |
2-1/4 |
2.250 |
2.175 |
2.598 |
2.480 |
1-9/32 |
1.ASTM A194 GR. 8 |
1.245 |
1-5/8 |
1.6250 |
2-7/16 |
2.438 |
2.356 |
2.815 |
2.686 |
1-25/64 |
1.429 |
1.353 |
1-3/4 |
1.7500 |
2-5/8 |
2.625 |
2.538 |
3.031 |
2.893 |
1-1/2 |
1.540 |
1.460 |
2 |
2.0000 |
3 |
3.000 |
2.900 |
3.464 |
3.306 |
1-23/32 |
1.763 |
1.675 |
2-1/4 |
2.2500 |
3-3/8 |
3.375 |
3.263 |
3.897 |
3.719 |
1-15/16 |
1.986 |
1.890 |
2-1/2 |
2.5000 |
3-3/4 |
3.750 |
3.625 |
4.330 |
4.133 |
2-5/32 |
2.209 |
2.105 |
2-3/4 |
2.7500 |
4-1/8 |
4.125 |
3.988 |
4.763 |
4.546 |
2-3/8 |
2.431 |
2.319 |
NOMINAL SIZE (D) |
BODY DIAMETER |
HEAD THICKNESS |
ACROSS THE FLATS |
ACROSS CORNERS |
||||
|---|---|---|---|---|---|---|---|---|
D (MAX) |
D (MIN) |
H (MAX) |
H (MIN) |
F (MAX) |
F (MIN) |
C (MAX) |
C (MIN) |
|
m10 |
10.00 |
9.78 |
6.63 |
6.17 |
17.00 |
15.73 |
18.48 |
17.77 |
m12 |
12.00 |
11.73 |
7.76 |
4.24 |
19.00 |
17.73 |
20.78 |
20.03 |
m14 |
14.00 |
13.73 |
9.09 |
8.51 |
22.00 |
20.67 |
24.25 |
23.35 |
m16 |
16.00 |
15.73 |
10.32 |
9.68 |
24.00 |
23.67 |
27.71 |
26.75 |
m20 |
20.00 |
19.67 |
12.88 |
12.12 |
30.00 |
29.16 |
34.64 |
32.95 |
m24 |
24.00 |
23.67 |
15.44 |
14.56 |
36.00 |
35.00 |
41.57 |
39.55 |
m30 |
30.00 |
29.67 |
19.48 |
17.92 |
46.00 |
45.00 |
53.12 |
50.85 |
m36 |
36.00 |
35.61 |
23.38 |
21.63 |
55.00 |
53.80 |
63.51 |
60.79 |
m42 |
42.00 |
41.38 |
26.97 |
25.03 |
65.00 |
62.90 |
75.06 |
71.71 |
m48 |
48.00 |
47.38 |
31.07 |
28.93 |
75.00 |
72.60 |
86.60 |
82.76 |
m56 |
56.00 |
55.26 |
36.2 |
33.80 |
85.00 |
82.20 |
98.15 |
93.71 |
m64 |
64.00 |
63.26 |
41.32 |
38.68 |
95.00 |
91.80 |
109.70 |
104.65 |
m72 |
72.00 |
71.26 |
46.45 |
43.55 |
105.00 |
101.40 |
121.24 |
115.60 |
m80 |
80.00 |
79.26 |
51.58 |
48.42 |
115.00 |
111.00 |
132.72 |
126.54 |
m90 |
90.00 |
89.13 |
57.74 |
54.26 |
130.00 |
125.50 |
150.11 |
143.07 |
m100 |
90.00 |
99.13 |
63.9 |
60.10 |
145.00 |
140.00 |
167.43 |
159.60 |
Size |
USS |
SAE |
||||
|---|---|---|---|---|---|---|
Inside Diameter (A) |
Outside Diameter (B) |
Thickness (C) |
Inside Diameter (A) |
Outside Diameter (B) |
Thickness (C) |
|
#2 |
- |
- |
- |
3/32" |
1/4" |
0.020" |
#4 |
- |
- |
- |
1/8" |
5/16" |
0.032" |
#6 |
- |
- |
- |
5/32" |
3/8" |
0.049" |
#8 |
- |
- |
- |
3/16" |
7/16" |
0.049" |
Nominal |
Thread. |
Hex Socket Size |
Body diameter and Head height |
Head Dia |
Soc. length |
||
|---|---|---|---|---|---|---|---|
Size |
Pitch |
Max |
Min |
Max |
Min |
||
J |
D /H |
A |
K |
||||
M3 |
0.5 |
2.50 |
3.00 |
2.86 |
5.50 |
5.20 |
1.3 |
M4 |
0.70 |
3.00 |
4.00 |
3.82 |
7.00 |
6.64 |
2.00 |
M5 |
0.8 |
4.00 |
5.00 |
4.82 |
8.50 |
8.14 |
2.70 |
M6 |
1.0 |
5.00 |
6.00 |
5.82 |
10.00 |
9.64 |
3.30 |
M8 |
1.25 |
6.00 |
8.00 |
7.78 |
13.00 |
12.57 |
4.3 |
M10 |
1.5 |
8.00 |
10.00 |
9.78 |
16.00 |
15.57 |
5.50 |
M12 |
1.75 |
10.00 |
12.00 |
11.73 |
18.00 |
17.57 |
6.60 |
M16 |
2.0 |
14.00 |
16.00 |
15.73 |
24.00 |
23.48 |
8.80 |
M20 |
2.5 |
17.00 |
20.00 |
19.67 |
30.00 |
29.48 |
10.70 |
M24 |
3.0 |
19.00 |
24.00 |
23.67 |
36.00 |
35.38 |
12.90 |
Nut Size (mm) |
Diameter* (mm) |
Height (mm) |
||
|---|---|---|---|---|
Hex Nut |
Jam Nut |
Nylock Nut |
||
2 |
4 |
1.6 |
1.2 |
- |
2.5 |
5 |
2 |
1.6 |
- |
3 |
5.5 |
2.4 |
1.8 |
4 |
4 |
7 |
3.2 |
2.2 |
5 |
5 |
8 |
4 |
2.7 |
5 |
6 |
10 |
5 |
3.2 |
6 |
7 |
11 |
5.5 |
3.5 |
- |
8 |
13 |
6.5 |
4 |
8 |
10 |
17 |
8 |
5 |
10 |
12 |
19 |
10 |
6 |
12 |
14 |
22 |
11 |
7 |
14 |
16 |
24 |
13 |
8 |
16 |
18 |
27 |
15 |
9 |
18.5 |
20 |
30 |
16 |
10 |
20 |
* This is the diameter across the flats. It is also the size of wrench to use. |
||||
Bolt Size
|
USS
|
SAE
|
||||
|---|---|---|---|---|---|---|
OD (in.)
|
ID (in.)
|
Thickness
|
OD (in.)
|
ID (in.)
|
Thickness
|
|
1/8 (#6)
|
-
|
-
|
-
|
0.375
|
0.156
|
.036/.065
|
5/32 (#8)
|
-
|
-
|
-
|
0.438
|
0.188
|
.036/.065
|
3/16 (#10)
|
0.560
|
0.250
|
.036/.065
|
0.500
|
0.220
|
.036/.065
|
7/32 (#12)
|
-
|
-
|
-
|
0.562
|
0.250
|
.051/.080
|
1/4 (#14)
|
0.734
|
0.312
|
.051/.080
|
0.625
|
0.281
|
.051/.080
|
5/16
|
0.875
|
0.375
|
.064/.104
|
0.688
|
0.344
|
.051/.080
|
3/8
|
1.000
|
0.438
|
.064/.104
|
0.812
|
0.406
|
.051/.080
|
7/16
|
1.250
|
0.500
|
.064/.104
|
0.922
|
0.469
|
.051/.080
|
1/2
|
1.375
|
0.562
|
.086/.132
|
1.062
|
0.531
|
.074/.121
|
9/16
|
1.469
|
0.625
|
.086/.132
|
1.156
|
0.594
|
.074/.121
|
5/8
|
1.750
|
0.688
|
.108/.160
|
1.312
|
0.656
|
.074/.121
|
3/4
|
2.000
|
0.812
|
.122/.177
|
1.469
|
0.812
|
.108/.160
|
7/8
|
2.250
|
0.938
|
.136/.192
|
1.750
|
0.938
|
.108/.160
|
1
|
2.500
|
1.062
|
.136/.192
|
2.000
|
1.062
|
.108/.160
|
1 1/8
|
2.750
|
1.250
|
.136/.192
|
2.250
|
1.250
|
.108/.160
|
1 1/4
|
3.000
|
1.375
|
.136/.192
|
2.500
|
1.375
|
.136/.192
|
1 3/8
|
3.250
|
1.500
|
.153/.213
|
2.750
|
1.500
|
.136/.213
|
1 1/2
|
3.500
|
1.625
|
.153/.213
|
3.000
|
1.625
|
.153/.213
|
1 5/8
|
3.750
|
1.750
|
.153/.213
|
-
|
-
|
-
|
1 3/4
|
4.000
|
1.875
|
.153/.213
|
-
|
-
|
-
|
1 7/8
|
4.250
|
2.000
|
.153/.213
|
-
|
-
|
-
|
2
|
4.500
|
2.125
|
.153/.213
|
-
|
-
|
-
|
2 1/4
|
4.750
|
2.375
|
.320/.248
|
-
|
-
|
-
|
2 1/2
|
5.000
|
2.625
|
.210/.280
|
-
|
-
|
-
|
2 3/4
|
5.250
|
2.875
|
.228/.410S
|
-
|
-
|
-
|
3
|
5.500
|
3.125
|
.249/.327
|
-
|
-
|
-
|
| WEIGHTS MACHINE SCREWS & Type 1, 23, F and G TAPPING SCREWS LBS. Per 1000 pieces |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
DIAMETERS |
|||||||||||
LENGTHS |
#2 |
#3 |
#4 |
#5 |
#6 |
#8 |
#10 |
#12 |
1/4″ |
5/16″ |
3/8″ |
1/8 |
0.40 |
0.55 |
0.70 |
1.1 |
1.4 |
— |
— |
— |
— |
— |
— |
3/16 |
0.50 |
0.70 |
0.90 |
1.2 |
1.5 |
2.5 |
3.9 |
— |
— |
— |
— |
1/4 |
0.60 |
0.80 |
1.00 |
1.4 |
1.7 |
2.8 |
4.3 |
5.6 |
8.5 |
— |
— |
5/16 |
0.60 |
0.90 |
1.20 |
1.5 |
1.9 |
3.1 |
4.6 |
6.1 |
9.1 |
16.7 |
— |
3/8 |
0.70 |
0.90 |
1.30 |
1.7 |
2.1 |
3.4 |
5.0 |
6.5 |
9.8 |
17.7 |
29.2 |
7/16 |
0.80 |
1.00 |
1.50 |
1.9 |
2.2 |
3.6 |
5.4 |
6.9 |
10.4 |
18.8 |
30.7 |
1/2 |
0.80 |
1.10 |
1.60 |
2.0 |
2.4 |
3.9 |
5.8 |
7.4 |
11.1 |
19.8 |
32.2 |
9/16 |
0.90 |
1.20 |
1.70 |
2.2 |
2.6 |
4.2 |
6.2 |
7.8 |
11.7 |
20.9 |
33.6 |
5/8 |
1.00 |
1.30 |
1.80 |
2.3 |
2.8 |
4.5 |
6.6 |
8.3 |
12.4 |
21.9 |
35.1 |
3/4 |
1.10 |
1.50 |
2.10 |
2.6 |
3.2 |
5.0 |
7.3 |
9.2 |
13.6 |
24.0 |
38.0 |
7/8 |
1.30 |
1.70 |
2.30 |
3.0 |
3.5 |
5.6 |
8.1 |
10.1 |
14.9 |
26.1 |
41.0 |
1″ |
1.40 |
1.90 |
2.50 |
3.4 |
3.9 |
6.2 |
8.9 |
11.0 |
16.1 |
28.8 |
44.0 |
1-1/8″ |
1.50 |
2.00 |
2.80 |
3.8 |
4.3 |
6.7 |
9.6 |
11.9 |
17.4 |
30.2 |
47.0 |
1-1/4″ |
1.60 |
2.20 |
3.00 |
4.1 |
4.6 |
7.3 |
10.4 |
12.8 |
18.7 |
32.3 |
49.8 |
1-1/2″ |
1.80 |
2.50 |
3.50 |
4.7 |
5.3 |
8.3 |
11.9 |
14.7 |
21.2 |
36.5 |
55.8 |
1-3/4″ |
2.10 |
2.90 |
4.00 |
5.3 |
6.1 |
9.4 |
13.5 |
16.5 |
23.7 |
40.7 |
61.7 |
2″ |
2.40 |
3.30 |
4.50 |
6.0 |
6.8 |
10.6 |
15.0 |
18.3 |
26.2 |
44.8 |
67.6 |
2-1/4″ |
2.60 |
3.60 |
5.00 |
6.7 |
7.6 |
11.8 |
16.6 |
20.1 |
28.8 |
19.0 |
73.5 |
2-1/2″ |
2.80 |
3.90 |
5.50 |
7.3 |
8.3 |
12.9 |
18.1 |
22.0 |
31.3 |
53.2 |
79.5 |
2-3/4″ |
3.10 |
4.30 |
6.00 |
7.9 |
9.1 |
13.9 |
19.7 |
23.8 |
33.9 |
57.3 |
85.3 |
3″ |
3.40 |
4.70 |
6.50 |
8.6 |
9.8 |
15.0 |
21.2 |
25.6 |
36.4 |
61.5 |
91.3 |
* Weights above are approximate and are based on pan head machine screws |
|||||||||||
Boiling |
Wick Test |
Boiling 25% NaCl |
|
2205 |
F |
P |
P |
254 SMO® |
F |
P |
P |
Type 316L |
F |
F |
F |
Type 317L |
F |
F |
F |
Alloy 904L |
F |
P or F |
P or F |
Alloy 20 |
F |
P |
P |
Density lbm/in3 |
Electrical Resistivity mW•in |
Thermal Conductivity (BTU/hr•ft•°F) |
Heat Capacity BTU/lbm•°F |
Electrical Resistivity (in x 10-6) |
|
|---|---|---|---|---|---|
| at 68°F | 0.278 | 27.6 | 8.7 | 0.112 | 33.5 |
| at 212°F | 26.1 | 9.2 | 0.119 | 35.4 | |
| at 392°F | 25.4 | 9.8 | 0.127 | 37.4 | |
| at 572°F | 24.9 | 10.4 | 0.134 | 39.4 |
Hot Forming
Shaping should be done whenever it is possible below 600°F. When hot structuring is required, the workpiece should be continuously warmed and worked between 1750° and 2250°F.Cold Forming
Quickly sheared and cold framed on equipment designed to work with hardened steels is compound 2205. In any case, 2205 has much greater strengths than austenitic alloys due to its high strength and rapid solidification.
| SAF 2205® Anchor Bolts | Philippines, Belgium, Indonesia, Dammam -KSA |
| Duplex Steel 2205 Threaded Rod | Europe, Thailand, France, Qatar |
| SAF 2205 Tower Bolts and Screws | Thailand, Saudi Arabia (KSA), Brazil,Czechia |
| Duplex Steel Stainless Steel Stud Bolts | Bangladesh, Finland, USA, Malaysia |
| Duplex Steel UNS S32205 Flange Bolts | Kuwait, Germany, Malaysia, South Africa |
| UNS S31803 Duplex Steel U Bolts | Singapore, Singapore, South Africa, Bahrain |
| Duplex Steel 2205 Stove Bolts | UK, Nigeria, Australia, Philippines |
| 2205 Stud Bolts, Nylon Insert Lock Nuts | Malaysia, Hong Kong, UAE, Oman |
| Duplex Steel 2205 Threaded Rod | Singapore, Iran, Italy, Malaysia, Chile |
| Phillips Flat Head Duplex Wedge Anchor Bolts | Norway, Turkey, United Arab Emirates (UAE) |
| Duplex Steel 2205 Eye Bolts and Finished Hex Nuts | Russia, Dubai, Malaysia, Netherlands |
| 2205 Duplex Steel Roofing Screw | Spain, Mexico, UK, Egypt |
| M12 x 40 long SAF 2205 bolts with nuts and washers | Malaysia, UAE, Europe, United Kingdom -UK |
| M8x110mm 2205 stud bolt and Duplex Socket head screw | South Korea, NY 12203 (USA), Malaysia, Singapore |
| Duplex 2205 nut & bolts | Poland, Ellington -United States, Canada, UK |
| Duplex Steel Gr: 2205 Hex Bolts with Nut and Flat washers | Canada, Singapore, Malaysia, Philippines |
| SAF 2205 bolts and nuts | Kuwait, Malaysia, Romania, Japan, Europe |
| M24 x 96mm Bolts and wedge anchors | Malaysia, China, Colombia, Sweden |
| SAF 2205 HEX.HEAD BOLT | Los Alamos -Mexico,Philippines, Taiwan, Malaysia |
| Mirror Buffed | Hot Dipped Galvanizing |
Epoxy Coating |
Electro Polished |
Passivation |
Teflon Coating |
Oxidized |
Zinc Plating |
Chrome Plating |
Grade |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
N |
Fe |
|---|---|---|---|---|---|---|---|---|---|---|
S31803 |
0.030 max |
2.00 max |
1.00 max |
0.030 max |
0.020 max |
22.0 – 23.0 |
3.0 – 3.5 |
4.50 – 6.50 |
0.14 – 0.20 |
63.72 min |
S32205 |
0.030 max |
2.00 max |
1.00 max |
0.030 max |
0.020 max |
21.0 – 23.0 |
2.50 - 3.50 |
4.50 – 6.50 |
0.8 – 0.20 |
63.54 min |
Grade |
Density |
Melting Point |
Yield Strength (0.2%Offset) |
Tensile Strength |
Elongation |
|---|---|---|---|---|---|
S31803 / S32205 |
7.8 g/cm3 |
1350 °C (2460 °F) |
Psi – 80000 , MPa – 550 |
Psi – 116000 , MPa – 800 |
15 % |
Duplex
|
Common Name
|
Related Specifications
|
||
|---|---|---|---|---|
European DIN
|
UNS
|
ASTM/ASME
|
||
Duplex Steel S31803/S32205
|
SAF 2205®
|
1.4462
|
S31803/S32205
|
F51/F60
|
| Duplex Steel 2205 Bolts and Nuts | Duplex Steel 2205 Lock Nuts |
| UNS S31803 Duplex Steel Tie Bar | duplex 2205 bolts |
| Duplex Steel 2205 Hex Nuts | ASME SA479 Duplex Steel 2205 Square Bolts |
| SAF 2205® Fasteners | Duplex Steel UNS S32205 Flange Bolts |
| Duplex Steel 2205 Fasteners | DIN 1.4462 Duplex Steel Stud Bolts |
| Duplex Steel S32205 Hex Nuts | Duplex Steel S32205 Tek Screw |
