Fasteners hold two or more components together, however exposure to any caustic can cause the fastener to corrode and break. This is a problem, especially in programmes that handle jobs involving flammable or even poisonous substances. Because of this, using coated fasteners is the best option. Manufacturers of coated nuts advise using them because they tend to live longer than uncoated nuts and because they are externally coated using a substrate.
Additionally, any teflon-coated b7 stud bolts do not react negatively with the application, lengthening its lifespan and providing a cost-effective alternative. The coating made of the synthetic fluoropolymer PTFE is incredibly resilient. The use of ptfe coated stud bolts in high temperatures is improved by a light coating. Additionally, PTFE coated fasteners have excellent abrasion resistance and chemical compound resistance. These are other characteristics linked to its use. The PTFE coated bolts and nuts not only have excellent corrosion resistant qualities but also have a very low coefficient of friction.
The use of cadmium for coating is restricted, perhaps due to the fact that it is thought to be carcinogenic, however cadmium coated fasteners are known to be mould resistant or to stop the growth of bacteria because they serve as a sacrificial layer on fasteners. The usage of polymer-coated fasteners, on the other hand, is excellent for applications that call for applications that will be put to a lot of use. The coating layer applied to the fastener tends to be permanent since the polymer bonds with the fastening and cannot be removed. So any fastener is properly protected from dents or scratches.
| Standard | IS, ANSI, ASTM DIN, ISO, JIS, GB, ASME, BS, UNI and all International Standards |
|---|---|
| Threads: | BSF, UNF METRIC, UNC, BSW or as required |
| Standard | ANSI – American National Standards Institute
DIN:DIN 933, DIN 931, DIN 970, DIN 934 UTS – Unified Thread Standard : UNF, NPT, NPTF, UNS, UNC, UNEF ISO – International Organization for Standardization ISO 4033, : ISO 4032, JIS standards |
| Fasteners/ Bolts Size | M10, M4, M16, M36 M2.5, M6, M30, M12, M8, M14, M2, M3, M20, M24, M5 to M160 |
| Length | 3 mm to 200 mm |
| Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe etc |
| Test Certificate | as per EN 10204 / 3.1 Manufacturer Test Certificate |
| Finishing | Zinc white, (yellow, black, blue), black oxide,
Dacroment, Geometry, plated zinc-nickel, anodizing, nickel plated, Stainless steel: Passivated Self-Colour, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, Stainless Steel, some special one like DACROMET and Mechanically Applied coating |
| raw materials of Source | JSPL, Usha Martin, Tata Steel, Mukund Steel, RINL, Dhamm Steel etc. |
| Form | Square, Hex, Threading as per Gauge, Round Etc. |
| Process of Production | M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element |
| Surface Coating |
|
| Packing | IN BULK: pallet, canton, carton / Small Boxs / pallet or customer request |
BOLT DIA |
Torque FT-LBS |
||
|---|---|---|---|
30% Initial Torque |
70% Torque |
100% Final Torque |
|
1/2 |
16 |
36 |
52 |
9/16 |
23 |
53 |
75 |
5/8 |
31 |
73 |
104 |
3/4 |
55 |
129 |
184 |
7/8 |
71 |
166 |
237 |
1 |
107 |
249 |
356 |
1.1/8 |
127 |
297 |
424 |
1.1/4 |
179 |
417 |
596 |
1.3/8 |
186 |
435 |
622 |
1.1/2 |
246 |
574 |
821 |
1.9/16 |
168 |
392 |
560 |
1.5/8 |
191 |
445 |
636 |
1.3/4 |
240 |
561 |
801 |
1.7/8 |
298 |
696 |
994 |
2 |
366 |
853 |
1219 |
2.1/4 |
529 |
1234 |
1762 |
2.1/2 |
733 |
1709 |
2442 |
2.3/4 |
986 |
2300 |
3285 |
3 |
1289 |
3008 |
4297 |
Nominal Size or Basic Major Thread Diameter |
F |
G |
H |
||||||
|---|---|---|---|---|---|---|---|---|---|
Width Across Flats |
Width Across Corners |
Thickness |
|||||||
Basic |
Max |
Min |
Max |
Min |
Basic |
Max |
Min |
||
1/4 |
.2500 |
7/16 |
.438 |
.428 |
.505 |
.488 |
7/32 |
.226 |
.212 |
5/16 |
.3125 |
1/2 |
.500 |
.489 |
.577 |
.557 |
17/64 |
.273 |
.258 |
3/8 |
.3750 |
9/16 |
.562 |
.551 |
.650 |
.628 |
21/64 |
.337 |
.479 |
7/16 |
.4375 |
11/16 |
.688 |
.675 |
.794 |
.768 |
3/8 |
.385 |
.365 |
1/2 |
.5000 |
3/4 |
.750 |
.736 |
.866 |
.840 |
7/16 |
.448 |
.427 |
9/16 |
.5625 |
7/8 |
.875 |
.861 |
1.010 |
.982 |
31/64 |
.496 |
.473 |
5/8 |
.6250 |
15/16 |
.938 |
.922 |
1.083 |
1.051 |
35/64 |
.559 |
.535 |
3/4 |
.7500 |
1-1/8 |
1.125 |
1.088 |
1.299 |
1.240 |
41/64 |
.665 |
.617 |
7/8 |
.8750 |
1-5/16 |
1.312 |
1.269 |
1.516 |
1.447 |
3/4 |
.776 |
.724 |
1 |
1.0000 |
1-1/2 |
1.500 |
1.450 |
1.732 |
1.653 |
55/64 |
.887 |
.831 |
1-1/8 |
1.1250 |
1-11/16 |
1.688 |
1.631 |
1.949 |
1.859 |
31/32 |
.999 |
.939 |
1-3/8 |
1.3750 |
2-1/16 |
2.062 |
1.994 |
2.382 |
2.273 |
1-11/64 |
1.206 |
1.138 |
1-1/2 |
1.500 |
2-1/4 |
2.250 |
2.175 |
2.598 |
2.480 |
1-9/32 |
1.ASTM A194 GR. 8 |
1.245 |
1-5/8 |
1.6250 |
2-7/16 |
2.438 |
2.356 |
2.815 |
2.686 |
1-25/64 |
1.429 |
1.353 |
1-3/4 |
1.7500 |
2-5/8 |
2.625 |
2.538 |
3.031 |
2.893 |
1-1/2 |
1.540 |
1.460 |
2 |
2.0000 |
3 |
3.000 |
2.900 |
3.464 |
3.306 |
1-23/32 |
1.763 |
1.675 |
2-1/4 |
2.2500 |
3-3/8 |
3.375 |
3.263 |
3.897 |
3.719 |
1-15/16 |
1.986 |
1.890 |
2-1/2 |
2.5000 |
3-3/4 |
3.750 |
3.625 |
4.330 |
4.133 |
2-5/32 |
2.209 |
2.105 |
2-3/4 |
2.7500 |
4-1/8 |
4.125 |
3.988 |
4.763 |
4.546 |
2-3/8 |
2.431 |
2.319 |
NOMINAL SIZE (D) |
BODY DIAMETER |
HEAD THICKNESS |
ACROSS THE FLATS |
ACROSS CORNERS |
||||
|---|---|---|---|---|---|---|---|---|
D (MAX) |
D (MIN) |
H (MAX) |
H (MIN) |
F (MAX) |
F (MIN) |
C (MAX) |
C (MIN) |
|
m10 |
10.00 |
9.78 |
6.63 |
6.17 |
17.00 |
15.73 |
18.48 |
17.77 |
m12 |
12.00 |
11.73 |
7.76 |
4.24 |
19.00 |
17.73 |
20.78 |
20.03 |
m14 |
14.00 |
13.73 |
9.09 |
8.51 |
22.00 |
20.67 |
24.25 |
23.35 |
m16 |
16.00 |
15.73 |
10.32 |
9.68 |
24.00 |
23.67 |
27.71 |
26.75 |
m20 |
20.00 |
19.67 |
12.88 |
12.12 |
30.00 |
29.16 |
34.64 |
32.95 |
m24 |
24.00 |
23.67 |
15.44 |
14.56 |
36.00 |
35.00 |
41.57 |
39.55 |
m30 |
30.00 |
29.67 |
19.48 |
17.92 |
46.00 |
45.00 |
53.12 |
50.85 |
m36 |
36.00 |
35.61 |
23.38 |
21.63 |
55.00 |
53.80 |
63.51 |
60.79 |
m42 |
42.00 |
41.38 |
26.97 |
25.03 |
65.00 |
62.90 |
75.06 |
71.71 |
m48 |
48.00 |
47.38 |
31.07 |
28.93 |
75.00 |
72.60 |
86.60 |
82.76 |
m56 |
56.00 |
55.26 |
36.2 |
33.80 |
85.00 |
82.20 |
98.15 |
93.71 |
m64 |
64.00 |
63.26 |
41.32 |
38.68 |
95.00 |
91.80 |
109.70 |
104.65 |
m72 |
72.00 |
71.26 |
46.45 |
43.55 |
105.00 |
101.40 |
121.24 |
115.60 |
m80 |
80.00 |
79.26 |
51.58 |
48.42 |
115.00 |
111.00 |
132.72 |
126.54 |
m90 |
90.00 |
89.13 |
57.74 |
54.26 |
130.00 |
125.50 |
150.11 |
143.07 |
m100 |
90.00 |
99.13 |
63.9 |
60.10 |
145.00 |
140.00 |
167.43 |
159.60 |
ISO Approved PTFE Coated U Bolts |
PTFE Coated Hanger Bolt |
PTFE Coated Heavy Hex Bolts |
PTFE Coated Stud Bolts |
PTFE Coated Stud Bolt |
PTFE Coated Grub Screw |
PTFE Coated Anchor Bolt |
PTFE Coated Stud Bolts |
PTFE Coated Stainless Steel bolts |
PTFE Coated Stud Bolt |
Stainless Steel Threaded Rod |
PTFE Coated J Bolt |
