Stainless Steel Bright Bars Manufacturer In India

buy ASTM A276 Type 316 and 304 Cold Finished Bright Steel Bar at best price in India

 

 

 

Manufacturer & supplier of Stainless Steel Bright Flat and Peeled Bright Bar

A bright bar has a glossy surface, as its name suggests. These bars reflect light to a greater extent because of their flat surface. Leaving the name aside, SS Hardening Steel Bright Bars are most useful in applications requiring highly precise tolerances. Applications with tight tolerances are typically seen as being extremely critical and leaving no opportunity for error. In certain situations, a mistake could have a negative impact on the environment or on human life. Every Stainless Steel Bright Bar Manufacturer In India uses specifications or standards, like ASTM A276, in the production of stated items, which come in a variety of alloy grades.

It is simpler to produce accurate dimensions components like the Stainless Steel Peeled Bright Bar when the requirements are adhered to. The vehicle sector is one that needs tighter tolerances. The usage of a Stainless Steel Bright Flat Bar satisfies the demand for exact automotive parts, especially when their dimensions are a factor that is taken into consideration. Molybdenum bearing A276 Type 316 Cold Finished Bright Steel Bar is used in a variety of industrial sectors, including agriculture, textiles, railroads, power plants, etc. This is especially true given the alloy's strong tensile properties and good corrosion resistance. In applications that require a low cost option, the end user may choose to purchase a cheaper grade like the A276 Type 304 Bright Bar, which also offers moderate tensile strength and good resistance to corrosion.

compare price of Stainless Steel Bright Bar with Stainless Steel 316 Round Bar price list before buy

 

 

 

 

• All of our SS Bright Bar & rods are packaged as per international standard to prevent any possible damage or loss.
• By default, we will use thick woven plastic bag to bundle the finished pipes together in batches

Types of Packaging:

– Bundles (hexagonal)
– Wooden Boxes
– Crates (steel/wooden)
– Packaging for Bright Rod as per customer’s requirements

 

 

 

 

We produce Stainless Steel Bar by using below method

• Surface finish 0.5 µmm to 1.5µmm max>
• Pickled, Annealed, Centreless Ground, Cold Drawn & Polished, Stainless Steel Cold Drawn Bright Bar: Diameter 2.5 milimeter- 14 milimeter
• Centreless Ground , Straightened, Peeled, Polished, Stainless Steel Peeled Bar: Diameter Ø15 milimeter -120 milimeter.
• 240,400,600 Grit Belt Pol, Straightness upto 00.05 milimeter/ meter - 1 milimeter/meter.

 

 

 

 

• Positive material recognition
• Chemical examination
• Radiographic Test
• Buckling & Crushing test
• Mechanical examining like tensile, Elongation and reduction of area.
• Pitting Corrosion Test
• Eddy Current test

 

• Turned & rough polished
• Smooth Turned & Polished
• Trailed center less ground & polished
• Annealed
• The strain Hardened
• Hardened strain
• Peeled, center less ground & polished
• Solenoid quality
• Cold drawn
• Peeled and polished

• Oil & Water Quenching
• Hardening & Tempering & Normalizing
• Solution Annealing
• Soft Annealing

 

HS code is called Harmonized System Code, Created by World Customs Organization (WCO). HS code in like manner, otherwise called HTS code in USA and NCM code in Brazil, HSN code in India.

In all Countries First six digits of HSH Code are same.

• First 2 digits – chapters
• First 4 digits – heading
• First 6 digits – sub heading

 

---

---

---

 

• Malleability class, where L is low, N is typical and E is Earthquake/seismic flexibility. This assignment happened because of the need to furnish support with malleability fitting for tremor safe designs
• Size, which is the ostensible bar breadth in mm – the standard records the favored ostensible measurements alongside the comparing cross-sectional territory and mass/met
• Strength grade, such as 300 or 500 grade, where the number is the yield strength in megapascals.
• Shape, where R is round & D is deformed.

 

 

 

• Each lot is tested and ensured that material is free from Radio active contamination.
• Free from any internal defects
• Each Stainless Steel Bar is tested for size tolerance,Ovality,length and Roughness.
• Container is fumigated before stuffing. All wooden box /blockes are also fumigated.
• Bundles are made of 500/1000kgs each packed in HDPE sheets.
• We issue EN10204/3.1 Certificate as per ADW0
• All required Mechanical and metallurgical tests are carried out at our works.

 

What is PREN?

Pitting resistance equivalent numbers (PREN) are a hypothetical method of looking at the pitting consumption obstruction of different kinds of hardened steels, in view of their substance creations.

The formula used to calculate PREN is as below:

PREN = %Cr + 3.3(%Mo) + 16(%N)

PREN = 1 × %Cr + 3.3 (%Mo + 0.5 × %W) + 16 × %N

 

 

• Heat Treatment Charts
• Commercial Invoice including HS Code
• Fumigation Certificates
• Quality Assurance Plan (QAP)
• Packing List including number of boxes, net weight and gross weight, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Raw Material Test Reports
• NABL approved Laboratory Test Reports
• Material Traceability Records

 

 

 

 

 

 

• Cold drawing of steel improves Size and Section which provides Tighter tolerances which Reduces machining losses.
• It increases Mechanical Properties which Can reduce the need for hardening.
• Improved Steel Surface Finish which Reduces surface machining & improves quality.

 

 

• Miscellaneous Fabrication Jobs
• Electric Motors & Pumps
• Mining
• Automobiles
• Agriculture
• Hoses & Fittings
• Railways
• Oil and Gas Pipeline
• Food Processing Industry
• Paper & Pulp Industry
• Water Supply Systems
• Shaft Making

 

• Outstanding Corrosion Resistance
• Brute strength
• A Highly Precise Surface Finish
• Higher Resistance to Cryogenic Temperatures
• Non-Magnetic Response
• A higher dimensional accuracy