One of the most adaptable pure metals, nickel is employed in a variety of applications. A pure nickel round bar has a wide range of characteristics, but its ability to function effectively at high temperatures is perhaps its most important one. These characteristics include high levels of ductility and corrosion resistance. Specification Numerous alloys, including nickel (UNS N02200), low carbon nickel (UNS N02201), and solution-strengthened nickel (UNS N02211), are included in ASTM B160 nickel round bar. These alloys can be hot worked, cold worked, or annealed.
The nickel 201 round bar or rod is fairly simple to produce and comes in a variety of shapes. These parts typically come in the following shapes: round, square, hexagonal, or rectangle. The specification specifies that tests be run to ascertain the round nickel-silver bar's characteristics, such as its tensile strength and yield strength. The nickel alloy round bar's elongation properties, in addition to its mechanical characteristics, are specified so that the diameter or even the separation between the bar's parallel surfaces can be used to measure elongation. Additionally, a tension test, a hardness test, and a chemical analysis are performed on the nickel 200 round bar.
compare Nickel Round bar price with inconel 625 round bar price list
Are you looking for an Indian producer of nickel alloy round bars who will deliver products to your nation? Speak with Simplex Steel, one of the most experienced manufacturers of Nickel 200 Round Bar in Mumbai, India.
| Dimensions | DIN, EN, ASTM, JIS, ASME, BS, AISI |
|---|---|
| Round Bars size | Diameter: 3-~800mm |
| Flat Bars size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Angle Bars size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Channel Bars | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Rectangular Bars Section | 3.0 to 12.0mm thickness |
| Billet Size | 1/2 to 495mm Diameter |
| Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Hollow Bars | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Dimensions | Diameter / Height: |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Surface | Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished |
| Condition | Hardened & tempered, annealed |
| Technique | Stainless Steel Cold Drawn, Hot Rolled, Forged Round Bars,Cold Rolled, Rod |
| Processing | Bars cutting to 650mm |
| Form | Rod, Round, Channel Bars, T-Bars, Flat Bars, Precision Ground Bars, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bars, Ingot, Billet, I/H Bars, Forging etc. |
| Description | Price Per Unit (INR) |
|---|---|
| Bar - Size : 50 Mm Dia X 500 Mm Length. | 24,152 |
| Metal Ring Joint Gaskets Dim As Per Asmeb16.20/api 6a-nickel 200, Round Bar 40mm Dia X 300 Mm Long | 21,525 |
Always buy from Nickel Alloy Round Bar manufacturers in India for factory price and genuine material.
| item name | Diameter | Alloy | Density |
|---|---|---|---|
| 1/4 Inch Diameter | 1/4 inches | Alloy 200/201 | 8.89 lbs/in³0.321 g/cm³ |
| 9/32 Inch Diameter | 9/32 inches | Alloy 200/201 | 8.89 lbs/in³0.321 g/cm³ |
| 5/16 Inch Diameter | 5/16 inches | Alloy 200/201 | 8.89 lbs/in³0.321 g/cm³ |
| 11/32 Inch Diameter | 11/32 inches | Alloy 200/201 | 8.89 lbs/in³0.321 g/cm³ |
| 3/8 Inch Diameter | 3/8 inches | Alloy 200/201 | 8.89 lbs/in³0.321 g/cm³ |
| 13/32 Inch Diameter | 13/32 inches | Alloy 200/201 | 8.89 lbs/in³0.321 g/cm³ |
| 7/16 Inch Diameter | 7/16 inches | Alloy 200/201 | 8.89 lbs/in³0.321 g/cm³ |
| 15/32 Inch Diameter | 15/32 inches | Alloy 200/201 | 8.89 lbs/in³0.321 g/cm³ |
| 1/2 Inch Diameter | 1/2 inches | Alloy 200/201 | 8.89 lbs/in³0.321 g/cm³ |
| 17/32 Inch Diameter | 17/32 inches | Alloy 200/201 | 8.89 lbs/in³0.321 g/cm³ |
| 9/16 Inch Diameter | 9/16 inches | Alloy 200/201 | 8.89 lbs/in³0.321 g/cm³ |
| 19/32 Inch Diameter | 19/32 inches | Alloy 200/201 | 8.89 lbs/in³0.321 g/cm³ |
| 5/8 Inch Diameter | 5/8 inches | Alloy 200/201 | 8.89 lbs/in³0.321 g/cm³ |
| 21/32 Inch Diameter | 21/32 inches | Alloy 200/201 | 8.89 lbs/in³0.321 g/cm³ |
| CD | Cold drawn | P | Polished |
| BD | Bright drawn | SRE | Slit rolled edge |
| CG | Centreless ground | HF | Hot finished |
| CF | Cold finished | HRAP | Hot rolled annealed and pickled |
| P&T | Peeled and turned | RT | Rough turned/peeled |
| ST | Smooth turned | PR | Peeled and reeled |
| Tolerances for Cold Drawn Nickel Round Bar | ||
|---|---|---|
| Shape / Section | Size, diameter or width across flats | Permitted variation |
| mm | mm | |
| Round | ≥6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 |
+ 0 to - 0.070 + 0 to - 0.085 + 0 to - 0.100 + 0 to - 0.120 + 0 to - 0.140 |
| Flat (thickness) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.250 + 0 to - 0.350 |
| Flat (width) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 > 100 ≦ 130 > 130 ≦ 160 > 160 ≦ 320 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.190 + 0 to - 0.220 + 0 to - 0.350 + 0 to - 1.00 + 1.00 to - 1.00 |
| Square and hexagon |
≥ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 105 |
+ 0 to - 0.090 + 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.250 |
| Metric | US Bar | ASTM/ Canadian | Japanese | ||||
|---|---|---|---|---|---|---|---|
| Bar Size | Diam. (mm) | Bar Size | Diam. (Inch) | Bar Size | Diam. (mm2) | Bar Size | Diam. (mm) |
| 5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
| 5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
| 6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
| 7 | 7 | #5 | 0.625 | 25M | 500 | 16 | 16 |
| 8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
| 9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
| 10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
| 11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
| 12 | 12 | #10 | 1.250 | 32 | 32 | ||
| 14 | 14 | #11 | 1.375 | 35 | 35 | ||
| 16 | 16 | #12 | 1.500 | 38 | 38 | ||
| 18 | 18 | #13 | 1.625 | 41 | 41 | ||
| 20 | 20 | #14 | 1.750 | 44 | 44 | ||
| 22 | 22 | #15 | 1.875 | 48 | 48 | ||
| 25 | 25 | #16 | 2.000 | 51 | 51 | ||
| 28 | 28 | #18 | 2.250 | 57 | 57 | ||
| 32 | 32 | ||||||
| 36 | 36 | ||||||
| 40 | 40 | ||||||
| 44 | 44 | ||||||
| 50 | 50 | ||||||
| SIZE IN INCHES | LENGTH IN INCHES | WGHT./FT. |
|---|---|---|
| .500 | 120/216 | 0.749 |
| .750 | 120/216 | 1.686 |
| .875 | 120/216 | 2.295 |
| 1.250 | 120/216 | 4.683 |
| 1.375 | 120/216 | 5.666 |
| 1.500 | 120/316 | 6.743 |
| 1.750 | 120/216 | 9.179 |
| 2.000 | 120/216 | 11.988 |
| 2.250 | 120/216 | 15.173 |
| 2.500 | 120/216 | 18.732 |
| 2.750 | 120/216 | 22.665 |
| 2.875 | 120/216 | 24.773 |
| 3.000 | 120/216 | 26.974 |
| 3.250 | 120/216 | 31.657 |
| 3.500 | 120/216 | 36.714 |
| Alloy | DN-Trade Name | Material-No. | UNS-No. | ASTM Specification | DIN Specification |
|---|---|---|---|---|---|
| Nickel 200 | R-Nickel 99.2 | 2.4066 | N02200 | ASTM B160 | DIN 17740 |
| Nickel 201 | NR-Nickel 99 | 2.4068 | N02201 | ASTM B160 | DIN 17740 |
| Ni99.6 | BR- Nickel 99.6 | 2.4060 | DIN 17740 | ||
| LC-Ni99.6 | NR-Nickel 99.6 | 2.4061 | DIN 17740 |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|
| 8.9 G/Cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
| Grade | Ni | Fe | C | Mn | Si | Cu | Mg | Ti | S |
|---|---|---|---|---|---|---|---|---|---|
| Nickel 201 | 99.0 Min | 0.4 Max | 0.02 Max | 0.35 Max | 0.2 Max | 0.25 Max | 0.15 Max | 0.1 Max | 0.01 Max |
| Nickel 200 | 99.0 Min | 0.4 Max | 0.15 Max | 0.35 Max | 0.1 Max | 0.25 Max | - | - | 0.01 Max |
| HS Code | Description |
|---|---|
| 73072100 | BAR - SIZE : 50 MM DIA X 500 MM LENGTH. |
| 84849000 | METAL RING JOINT GASKETS DIM AS PER ASMEB16.20/API 6A-NICKEL 200, ROUND BAR 40MM DIA X 300 MM LONG |
| H&T | Hardened and tempered. |
| ANN | Annealed |
| PH | Precipitation hardened. |
| Turned Nickel round bar Tolerances | |
|---|---|
| Nickel round bar Size, diameter | Permitted variation |
| mm | mm |
| ≧ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 120 > 120 ≦ 180 > 180 ≦ 250 > 250 ≦ 315 > 315 ≦ 400 > 400 |
+ 0 to - 0.070 + 0 to - 0.085 + 0 to - 0.100 + 0 to - 0.120 + 0 to - 0.140 + 0 to - 0.160 + 0 to - 0.185 + 0 to - 0.210 + 0 to - 0.230 + 0 to - 0.250 |
| Precision Astm B160 Nickel Alloy Round Bar Tolerances | ||||
|---|---|---|---|---|
| Section | Size, diameter |
Permitted overall variation | ||
| Class A | Class B | Class C | ||
| mm | mm | mm | mm | |
| Round | ≧ 6 <75 | 0.05 | 0.025 | 0.013 |
| Nickel round bar Tolerance ISO “H” Series in MM | ||||||||
|---|---|---|---|---|---|---|---|---|
| NOMINAL SIZE | h5 | h6 | h7 | h8 | h9 | H10 | H11 | h12 |
| DIAMETER mm | ||||||||
| ~ to 3 | +0.004/0 | +0.006/0 | +0.01/0 | +0.014/0 | +0.025/0 | +0.04/0 | +0.06/0 | +0.1/0 |
| over 3 to 6 | +0.005/0 | +0.008/0 | +0.012/0 | +0.018/0 | +0.03/0 | +0.048/0 | +0.075/0 | +0.12/0 |
| over 6 to 10 | +0.006/0 | +0.009/0 | +0.015/0 | +0.022/0 | +0.036/0 | +0.058/0 | +0.09/0 | +0.15/0 |
| over 10 to 18 | +0.008/0 | +0.011/0 | +0.018/0 | +0.027/0 | +0.043/0 | +0.07/0 | +0.11/0 | +0.18/0 |
| over 18 to 30 | +0.009/0 | +0.013/0 | +0.021/0 | +0.033/0 | +0.052/0 | +0.084/0 | +0.13/0 | +0.21/0 |
| over 30 to 50 | +0.011/0 | +0.016/0 | +0.025/0 | +0.039/0 | +0.062/0 | +0.1/0 | +0.16/0 | +0.25/0 |
| over 50 to 80 | +0.013/0 | +0.019/0 | +0.03/0 | +0.046/0 | +0.074/0 | +0.12/0 | +0.19/0 | +0.3/0 |
| over 80 to 120 | +0.015/0 | +0.022/0 | +0.035/0 | +0.054/0 | +0.087/0 | +0.14/0 | +0.22/0 | +0.35/0 |
| over 120 to 180 | +0.018/0 | +0.025/0 | +0.04/0 | +0.063/0 | +0.1/0 | +0.16/0 | +0.25/0 | +0.4/0 |
| over 180 to 250 | +0.02/0 | +0.029/0 | +0.046/0 | +0.072/0 | +0.115/0 | +0.185/0 | +0.29/0 | +0.46/0 |
| Pure Ni Alloy Rectangular Rod Cold Drawn | Ni Alloy Polished Square Rod |
| Pure Ni Alloy Square Rod | Ni Alloy ASTM B160 Polished Flat Rod |
| Ni Alloy ASTM B160 Rectangular Rod stock | Ni Alloy Polished Rod Stock |
| Ni Alloy Hex Rod Cold Drawn | Ni Alloy ASTM B160 Triangular Rod |
| Astm B160 Ni Alloy Threaded Rod M12 | Ni Alloy ASTM B160 Threaded Rod Stock |
| Ni Alloy Square Rod Bright | Ni Alloy Bright Rod Cold Drawn |
| Ni Alloy Square Rod Annealed | ASTM B160 Ni Alloy Bright Rod Flat |
| Astm B160 Ni Alloy Rectangular Rod Bright | Pure Ni Alloy Bright Rod Hollow |
| Ni Alloy ASTM B160 Threaded Rod M16 | Ni Alloy Threaded Rods |
| Ni Alloy Square Rod Black | Pure Ni Alloy Black Rod |
| Pure Ni Alloy Rectangular Rod Black | Ni Alloy Bright Rod Hex |
| Ni Alloy ASTM B160 Hex Rod Black | Ni Alloy Square Rod |
| Ni Alloy ASTM B160 Rectangular Rod Polished | Pure Ni Alloy Polished Round Rod |
• Flattening/flaring test
• PMI/IGC test
• Macro/micro test
• Hardness test
• Mechanical/chemical test
• Hydrostatic/radiography test
Types of Packaging:
– Bundles (hexagonal)
– Wooden Boxes
– Crates (steel/wooden)
– Packaging for Rod as per customer’s requirements
