When it comes to being utilised in applications based on marine engineering, monel alloys are among the most resilient ones. The monel round bar's extremely high copper content gives it the capacity to withstand corrosion even when submerged in brine solutions or used with sodium chloride salts. The amount of salt in water bodies (oceans and seas) makes up about 3.5 percent of their weight on any given day. Salt solutions are frequently corrosive, however the chlorine in salt is what causes problems for metals.
Chlorine eats at the passivated layer of metals that have undergone passivation, promoting the growth of rust. However, due to the alloy's inclusion of copper, Monel round bar vendors advise using it for a variety of marine-based applications. The alloy's composition of copper and nickel results in a strong alloy. The corrosion rate of a Monel square bar is extremely low in water that is moving quickly. The Monel hex bar would perform better in marine settings than traditional stainless steel alloys like grade 304.
Due to its strong hygroscopicity, salt collects and holds large amounts of moisture. Corrosion on metal surfaces results from water retention. However, because of the alloy's resistance to salt sprays, marine conditions are ideal for Monel flat bars. Monel rod also has characteristics that make it resistant to MIC, also known as microbially induced corrosion, and biofouling.
Before buy compare Monel Round Bar price with inconel round bar price list
| Dimensions | EN, ASME, AISI, BS, JIS, DIN, ASTM, |
|---|---|
| Round bar size | Thickness: 2 to 100 milimeter |
| Tolerance | K11, H8, H12, K12, H13, H10, H9, K9, K10, H11, or as per need |
| Form | Round, Rod, T-Bars, Channel Bars, Precision Ground Bars, Flat Bars, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Threaded, Hex (A/F), Rectangle, Half Round Bars, Profiles, Billet, Ingot, Forging, I/H Bars etc. |
| Flat bar size | Dia: 3-~800 milimeter |
| Width: 10 - 500 milimeter | |
| size of Angle bar | 3 milimeter * 20 milimeter* 20 milimeter~12 milimeter* 100 milimeter* 100 milimeter |
| Section bar | 3.0 - 12.0 milimeter thk |
| Channel Bar sizes | 5 - 6 milimeter thk, 80 x 40 milimeter - 150 x 75 milimeter section |
| Hollow Bar sizes | 32 milimeter Outside Diameter x 16 milimeter Inside Diameter to 250 milimeter Outside Diameter x 200 milimeter Inside Diameter) |
| Size of Rectangles | 34 x 30 milimeter - 295 x 1066 milimeter |
| Billet Size | 1/2 - 495 milimeter Diameter |
| Surface | Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished |
| Finish | Cold (bright) drawn, hot rolled, slit rolled edge, peeled, centreless ground, hot rolled annealed, Rough Turned, Polish, Bright, Centreless Ground, smooth turned, Grinding & Black |
| Technique | Monel Hot Rolled, Cold Rolled, Cold Drawn, Forged Round Bar, Rod |
| Condition | annealed, tempered, Hardened |
| Processing | cutting to 650 milimeter |
| Description | Per Unit (INR) | Price in USD | Price in EURO |
|---|---|---|---|
| Nickel Copper Round Bar Grade Niclal 400(Monel 400) Dia 12.2x 3500 Mm(As Per Inv & P/list) | 1,069 | 14.50 | 11.96 |
| Nickel Alloy Round Bars Grade Monel 400 Uns N04400 | 869 | 11.79 | 9.72 |
| Nickel Alloy Round Bars Grade Monel 400 Uns N04400 | 869 | 11.79 | 9.72 |
| Monel 400 Round Bars (Goods For Re-export, No Ex Bonding Allowed) | 37,404 | 507.48 | 418.44 |
| Monel 400 Round Bars (Goods For Re-export, No Ex Bonding Allowed) | 106,270 | 1441.82 | 1188.84 |
| Nickel Copper Round Bars (Monel 400) Dia. 14.28 X 3000mm H12 | 1,254 | 17.01 | 14.03 |
| Nickel Copper Round Bars Grade Niclal 400 (Monel 400) Dia.12.2x3500mm (As Per Invoice & P/list) | 1,190 | 16.15 | 13.31 |
| Nickel Alloy Round Bars Grade Monel [ Ni-65%, Cu- 32% ] | 447 | 6.06 | 5.00 |
| Nickel Alloy Round Bars Grade Monel [ Ni-65%, Cu- 32% ] | 447 | 6.06 | 5.00 |
| Round Bar Niclal 400 Diam 12.2x3500mm H12 (Monel 400 Astm B-164) | 1,212 | 16.44 | 13.56 |
| US Bar | Metric | Japanese | Canadian/ASTM | ||||
|---|---|---|---|---|---|---|---|
| Diameter(Inch) | Bar Size | Diameter (millimeter) | Bar Size | Diameter (millimeter) | Bar Size | Diameter (millimeter2) | Bar Size |
| 0.250 | #2 | 5 | 5 | 6 | 6 | 100 | 10M |
| 0.375 | #3 | 5.5 | 5.5 | 10 | 10 | 200 | 15M |
| 0.500 | #4 | 6 | 6 | 13 | 13 | 300 | 20M |
| 0.625 | #5 | 7 | 7 | 16 | 16 | 500 | 25M |
| 0.750 | #6 | 8 | 8 | 19 | 19 | 700 | 30M |
| 0.875 | #7 | 9 | 9 | 22 | 22 | 1000 | 35M |
| 1.000 | #8 | 10 | 10 | 25 | 25 | 1500 | 45M |
| 1.125 | #9 | 11 | 11 | 29 | 29 | 2500 | 55M |
| 1.250 | #10 | 12 | 12 | 32 | 32 | ||
| 1.375 | #11 | 14 | 14 | 35 | 35 | ||
| 1.500 | #12 | 16 | 16 | 38 | 38 | ||
| 1.625 | #13 | 18 | 18 | 41 | 41 | ||
| 1.750 | #14 | 20 | 20 | 44 | 44 | ||
| 1.875 | #15 | 22 | 22 | 48 | 48 | ||
| 2.000 | #16 | 25 | 25 | 51 | 51 | ||
| 2.250 | #18 | 28 | 28 | 57 | 57 | ||
| 32 | 32 | ||||||
| 36 | 36 | ||||||
| 40 | 40 | ||||||
| 44 | 44 | ||||||
| 50 | 50 | ||||||
| Section/Shape | diameter, width or Size across flats | variation Permitted |
|---|---|---|
| millimeter | millimeter | |
| Flat (thickness) | < 18 > 30 ≦ 50 > 18 ≦ 30 > 50 ≦ 80 |
+ 0 to - 00.110 + 0 to - 00.250 + 0 to - 00.130 + 0 to - 00.350 |
| Square and hexagon |
> 18 ≦ 30 ≥ 6 ≦ 18 > 30 ≦ 50 > 80 ≦ 105 > 50 ≦ 80 |
+ 0 to - 00.110 + 0 to - 00.090 + 0 to - 00.130 + 0 to - 00.250 + 0 to - 00.160 |
| Round | > 18 ≦ 30 ≥6 ≦ 18 > 30 ≦ 50 > 80 ≦ 100 > 50 ≦ 80 |
+ 0 to - 00.085 + 0 to - 00.070 + 0 to - 00.100 + 0 to - 00.140 + 0 to - 00.120 |
| Flat (width) | < 18 > 30 ≦ 50 > 18 ≦ 30 > 50 ≦ 80 > 160 ≦ 320 > 100 ≦ 130 > 80 ≦ 100 > 130 ≦ 160 |
+ 0 to - 00.110 + 0 to - 00.160 + 0 to - 00.130 + 0 to - 00.190 + 1.00 to - 1.00 + 0 to - 00.350 + 0 to - 00.220 + 0 to - 1.00 |
| Dia | size in inches | Density | Weight |
|---|---|---|---|
| 0.319 lbs/in³8.82989 g/centimeter³ | |||
| 0.281 in. 7.1374 milimeter | 9/32 | 0.237 lbs/ft 0.3527034 kilogram/m | |
| 0.25 in. 6.35 milimeter | 1/4 | 0.187 lbs/ft 0.2782934 kilogram/m | |
| 0.406 in. 10.3124 milimeter | 13/32 | 0.495 lbs/ft 0.736659 kilogram/m | |
| 0.375 in. 9.525 milimeter | 3/8 | 0.421 lbs/ft 0.6265322 kilogram/m | |
| 0.343 in. 8.7122 milimeter | 11/32 | 0.354 lbs/ft 0.5268228 kilogram/m | |
| 0.5 in. 12.7 milimeter | 1/2 | 0.749 lbs/ft 1.1146618 kilogram/m | |
| 0.437 in. 11.0998 milimeter | 7/16 | 0.574 lbs/ft 0.8542268 kilogram/m | |
| 0.625 in. 15.875 milimeter | 5/8 | 1.17 lbs/ft 1.741194 kilogram/m | |
| 0.562 in. 14.2748 milimeter | 9/16 | 0.948 lbs/ft 1.4108136 kilogram/m | |
| 0.531 in. 13.4874 milimeter | 17/32 | 0.846 lbs/ft 1.2590172 kilogram/m | |
| 0.468 in. 11.8872 milimeter | 15/32 | 0.649 lbs/ft 0.9658418 kilogram/m | |
| 0.593 in. 15.0622 milimeter | 19/32 | 1.06 lbs/ft 1.577492 kilogram/m | |
| 0.687 in. 17.4498 milimeter | 11/16 | 1.42 lbs/ft 2.113244 kilogram/m | |
| 0.656 in. 16.6624 milimeter | 21/32 | 1.29 lbs/ft 1.919778 kilogram/m | |
| 0.75 in. 19.05 milimeter | 3/4 | 1.690 lbs/ft 2.515058 kilogram/m | |
| 0.718 in. 18.2372 milimeter | 23/32 | 1.55 lbs/ft 2.30671 kilogram/m | |
| 0.812 in. 20.6248 milimeter | 13/16 | 1.98 lbs/ft 2.946636 kilogram/m | |
| 0.781 in. 19.8374 milimeter | 25/32 | 1.83 lbs/ft 2.723406 kilogram/m | |
| 0.937 in. 23.7998 milimeter | 15/16 | 2.63 lbs/ft 3.913966 kilogram/m | |
| 0.843 in. 21.4122 milimeter | 27/32 | 2.13 lbs/ft 3.169866 kilogram/m | |
| 0.906 in. 23.0124 milimeter | 29/32 | 2.46 lbs/ft 3.660972 kilogram/m | |
| 1 in. 25.4 milimeter | 1 | 3.00 lbs/ft 4.4646 kilogram/m | |
| 0.968 in. 24.5872 milimeter | 31/32 | 2.81 lbs/ft 4.181842 kilogram/m | |
| 0.875 in. 22.225 milimeter | 7/8 | 2.29 lbs/ft 3.407978 kilogram/m |
Specifications: |
AMS 4731, AMS 4675, ASTM B164, AMS 4730, |
International Specifications: |
BS3076NA13, QQ-N-281 , VdTUV 263, DIN 17753 |
|
|
hex bar Size in Inches |
hex bar Wt per Ft |
hex bar Wt per 12′ |
|---|---|---|
3/16″ |
0.104 |
1.248 |
1/4″ |
0.180 |
2.160 |
5/16″ |
0.290 |
3.480 |
3/8″ |
0.625 |
4.920 |
7/16″ |
0.560 |
6.72 |
1/2″ |
0.740 |
8.880 |
9/16″ |
0.930 |
11.16 |
5/8″ |
1.150 |
13.80 |
11/16″ |
1.390 |
16.68 |
3/4″ |
1.660 |
19.92 |
13/16″ |
1.950 |
23.40 |
7/8″ |
2.300 |
27.60 |
15/16″ |
2.625 |
31.20 |
1″ |
2.90 |
34.80 |
1-1/16″ |
3.30 |
39.60 |
1-1/8″ |
3.700 |
44.40 |
1-1/4″ |
4.625 |
55.20 |
1-5/16″ |
5.100 |
61.20 |
1-3/8″ |
5.625 |
67.20 |
1-7/16″ |
6.100 |
73.20 |
1-1/2″ |
6.625 |
79.20 |
1-5/8″ |
7.800 |
93.60 |
1-3/4″ |
9.030 |
108.36 |
1-7/8″ |
10.400 |
124.80 |
2″ |
11.80 |
141.60 |
2-1/4″ |
14.920 |
179.04 |
2-3/8″ |
16.920 |
203.04 |
2-1/2″ |
18.42 |
221.04 |
3″ |
26.53 |
318.36 |
metric weights and sizes |
|||
|---|---|---|---|
Colour Code |
Size |
(meters) Length |
Kilogram per Meter |
Blue |
13 x 3 |
6.0 |
0.031 |
Blue |
10 x 3 |
0.024 |
|
Blue |
16 x 3 |
0.038 |
|
Orange |
13 x 5 |
0.046 |
|
Red |
16 x 8 |
1.03 |
|
Orange |
16 x 5 |
0.064 |
|
Orange |
20 x 5 |
0.081 |
|
Blue |
20 x 3 |
0.048 |
|
Yellow |
20 x 10 |
1.61 |
|
White |
20 x 6 |
0.097 |
|
Orange |
25 x 5 |
1.01 |
|
Blue |
25 x 3 |
0.060 |
|
Red |
25 x 8 |
1.61 |
|
White |
25 x 6 |
1.21 |
|
Pink |
25 x 12 |
2.41 |
|
Yellow |
25 x 10 |
2.01 |
|
Orange |
32 x 5 |
1.29 |
|
Blue |
32 x 3 |
0.077 |
|
Red |
32 x 8 |
2.06 |
|
White |
32 x 6 |
1.55 |
|
Pink |
32 x 12 |
3.09 |
|
Yellow |
32 x 10 |
2.58 |
|
Blue |
40 x 3 |
0.097 |
|
White |
40 x 6 |
1.93 |
|
Orange |
40 x 5 |
1.61 |
|
Yellow |
40 x 10 |
3.22 |
|
Red |
40 x 8 |
2.58 |
|
Grey |
40 x 16 |
5.15 |
|
Pink |
40 x 12 |
3.86 |
|
Blue |
50 x 3 |
1.21 |
|
Green |
40 x 20 |
6.14 |
|
White |
50 x 6 |
2.41 |
|
Orange |
50 x 5 |
2.01 |
|
Yellow |
50 x 10 |
4.02 |
|
Red |
50 x 8 |
3.22 |
|
Grey |
50 x 16 |
6.44 |
|
Pink |
50 x 12 |
4.83 |
|
Purple |
50 x 25 |
10.01 |
|
Green |
50 x 20 |
8.05 |
|
Orange |
65 x 5 |
2.62 |
|
Blue |
65 x 3 |
1.57 |
|
Red |
65 x 8 |
4.18 |
|
White |
65 x 6 |
3.14 |
|
Pink |
65 x 12 |
6.28 |
|
Yellow |
65 x 10 |
5.23 |
|
Green |
65 x 20 |
10.05 |
|
Grey |
65 x 16 |
8.37 |
|
Orange |
75 x 5 |
3.02 |
|
White |
75 x 6 |
3.62 |
|
Purple |
65 x 25 |
13.1 |
|
Yellow |
75 x 10 |
6.04 |
|
Red |
75 x 8 |
4.83 |
|
Grey |
75 x 16 |
9.66 |
|
Pink |
75 x 12 |
7.24 |
|
Purple |
75 x 25 |
15.1 |
|
Green |
75 x 20 |
12.1 |
|
Orange |
90 x 5 |
3.62 |
|
Yellow |
75 x 40 |
24.1 |
|
White |
90 x 6 |
4.35 |
|
Red |
90 x 8 |
5.79 |
|
Yellow |
90 x 10 |
7.24 |
|
Pink |
90 x 12 |
8.69 |
|
Orange |
100 x 5 |
4.02 |
|
White |
100 x 6 |
4.83 |
|
Red |
100 x 8 |
6.44 |
|
Yellow |
100 x 10 |
8.05 |
|
Pink |
100 x 12 |
9.66 |
|
Grey |
100 x 16 |
12.9 |
|
Green |
100 x 20 |
16.1 |
|
Purple |
100 x 25 |
20.01 |
|
Green |
100 x 50 |
40.02 |
|
White |
110 x 6 |
5.31 |
|
Red |
110 x 8 |
7.08 |
|
Yellow |
110 x 10 |
8.85 |
|
Pink |
110 x 12 |
10.06 |
|
Orange |
130 x 5 |
5.23 |
|
White |
130 x 6 |
6.28 |
|
Red |
130 x 8 |
8.37 |
|
Yellow |
130 x 10 |
10.05 |
|
Pink |
130 x 12 |
12.6 |
|
Grey |
130 x 16 |
16.7 |
|
Green |
130 x 20 |
20.09 |
|
Purple |
130 x 25 |
26.2 |
|
Orange |
150 x 5 |
6.04 |
|
White |
150 x 6 |
7.24 |
|
Red |
150 x 8 |
9.66 |
|
Yellow |
150 x 10 |
12.1 |
|
Pink |
150 x 12 |
14.5 |
|
Grey |
150 x 16 |
19.3 |
|
Green |
150 x 20 |
24.1 |
|
Purple |
150 x 25 |
30.01 |
|
Green |
150 x 50 |
60.04 |
|
Orange |
180 x 5 |
7.24 |
|
White |
180 x 6 |
8.69 |
|
Yellow |
180 x 10 |
14.5 |
|
Pink |
180 x 12 |
17.4 |
|
Grey |
180 x 16 |
23.2 |
|
Green |
180 x 20 |
29.0 |
|
Purple |
180 x 25 |
36.2 |
|
White |
200 x 6 |
9.66 |
|
Red |
200 x 8 |
12.9 |
|
Yellow |
200 x 10 |
16.1 |
|
Pink |
200 x 12 |
19.3 |
|
Grey |
200 x 16 |
25.7 |
|
Green |
200 x 20 |
32.2 |
|
Purple |
200 x 25 |
40.03 |
|
White |
250 x 6 |
12.1 |
|
Red |
250 x 8 |
16.1 |
|
Yellow |
250 x 10 |
20.01 |
|
Pink |
250 x 12 |
24.1 |
|
Grey |
250 x 16 |
32.2 |
|
Green |
250 x 20 |
40.02 |
|
Purple |
250 x 25 |
50.03 |
|
White |
300 x 6 |
14.5 |
|
Red |
300 x 8 |
19.3 |
|
Yellow |
300 x 10 |
24.1 |
|
Pink |
300 x 12 |
29.0 |
|
Grey |
300 x 16 |
38.6 |
|
Green |
300 x 20 |
48.3 |
|
Purple |
300 x 25 |
60.04 |
|
To ensure flawless and perfectly straight surfaces, they are cleaned. The term "Turned Ground and Polished" screws, which refers to Monel Precision Ground Bar in excess, relates to adjustment bars constructed of premium steel and with fine accuracy. Monel Round bar is just what it sounds like: a long, round, and empty metal bar. It is available in a variety of different widths ranging from 1/4" to 24".
| Bright drawn | BD | Slit rolled edge | SRE |
| Cold drawn | CD | Polished | P |
| Peeled and turned | P&T | Rough turned/peeled | RT |
| Cold finished | CF | Hot rolled pickled and annealed | HRAP |
| Centreless ground | CG | Hot finished | HF |
| Smooth turned | ST | reeled and Peeled | PR |
| H&T | Hardened and tempered. |
| ANN | Annealed |
| PH | Precipitation hardened. |
| Size | kilogram / Meter | kilogram / Foot | Size | kilogram / Meter | kilogram / Foot | Size | kilogram / Meter | kilogram / Foot |
|---|---|---|---|---|---|---|---|---|
| 1/8" | 0.062 | 0.019 | 22 millimeter | 2.979 | 0.908 | 3 to 1/4" | 41.996 | 12.800 |
| 3 millimeter | 0.055 | 0.017 | 20 millimeter | 2.470 | 0.753 | 3" | 35.762 | 10.900 |
| 4 millimeter | 0.098 | 0.030 | 24 millimeter | 3.543 | 1.080 | 3 to 3/4" | 55.780 | 17.001 |
| 5/32" | 0.095 | 0.029 | 7/8" | 3.038 | 0.926 | 3 to 1/2" | 48.772 | 14.850 |
| 5 millimeter | 0.154 | 0.047 | 1" | 3.970 | 1.210 | 4 to 1/4" | 72.249 | 21.908 |
| 3/16" | 0.141 | 0.043 | 25 millimeter | 3.871 | 1.180 | 4" | 63.340 | 19.306 |
| 6 millimeter | 0.223 | 0.068 | 27 millimeter | 4.490 | 1.368 | 4 to 3/4" | 90.249 | 27.366 |
| 7/32" | 0.190 | 0.058 | 26 millimeter | 4.170 | 1.271 | 4 to 1/2" | 80.340 | 24.4487 |
| 7 millimeter | 0.298 | 0.091 | 30 millimeter | 5.548 | 1.691 | 5 to 1/2" | 121.000 | 36.690 |
| 1/4" | 0.249 | 0.076 | 1 to 1/8" | 5.033 | 1.534 | 5" | 99.940 | 30.461 |
| 8 millimeter | 0.398 | 0.120 | 32 millimeter | 6.314 | 1.894 | 6 to 1/2" | 167.630 | 51.093 |
| 5/16" | 0.387 | 0.118 | 1 to 1/4" | 6.349 | 1.924 | 6" | 143.900 | 43.860 |
| 3/8" | 0.557 | 0.170 | 35 millimeter | 7.553 | 2.390 | 7 to 1/2" | 225.000 | 68.226 |
| 9 millimeter | 0.498 | 0.152 | 1 to 3/8" | 7.550 | 2.303 | 7" | 196.000 | 59.432 |
| 11 millimeter | 0.748 | 0.228 | 38 millimeter | 8.903 | 2.792 | 10" | 397.140 | 121.048 |
| 10 millimeter | 0.620 | 0.189 | 36 millimeter | 7.999 | 2.438 | 8" | 254.55 | 77.586 |
| 12 millimeter | 0.889 | 0.271 | 40 millimeter | 9.872 | 3.009 | |||
| 7/16" | 0.761 | 0.232 | 1 to 1/2" | 8.951 | 2.715 | |||
| 13 millimeter | 1.043 | 0.318 | 1 to 3/4" | 12.179 | 3.712 | |||
| 1/2" | 0.994 | 0.303 | 1 to 5/8" | 10.449 | 3.200 | |||
| 9/16" | 1.256 | 0.383 | 1 to 7/8" | 13.977 | 4.260 | |||
| 14 millimeter | 1.207 | 0.368 | 45 millimeter | 12.555 | 3.807 | |||
| 5/8" | 1.551 | 0.473 | 50 millimeter | 15.414 | 4.698 | |||
| 15 millimeter | 1.391 | 0.424 | 48 millimeter | 14.205 | 4.330 | |||
| 17 millimeter | 1.791 | 0.543 | 2 to 1/8" | 17.963 | 5.475 | |||
| 16 millimeter | 1.578 | 0.481 | 2" | 15.906 | 4.848 | |||
| 18 millimeter | 2.001 | 0.610 | 60 millimeter | 22.205 | 6.768 | |||
| 11/16" | 1.880 | 0.573 | 2 to 1/4" | 20.128 | 6.135 | |||
| 3/4" | 2.237 | 0.682 | 2 to 3/8" | 22.435 | 6.838 | |||
| 2 to 1/2" | 24.856 | 7.576 | ||||||
| 2 to 5/8" | 27.409 | 8.354 | ||||||
| 2 to 3/4" | 30.083 | 9.169 |
STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
BS |
GOST |
AFNOR |
EN |
|---|---|---|---|---|---|---|---|
Monel 400 |
2.4360 |
N04400 |
NW 4400 |
NA 13 |
МНЖМц 28-2,5-1,5 |
NU-30M |
NiCu30Fe |
Monel K500 |
2.4375 |
N05500 |
– |
– |
– |
– |
– |
| Designation | C% | Co% | Cr% | Mo% | Ni% | V% | W% | Ai% | Cu% | Nb/Cb Ta% | Ti% | Fe% | Sonstige Autres-Other % |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Monel 400 | 0.12 | - | - | - | 65.0 | - | - | - | 32.0 | - | - | 1.5 | Mn 1.0 |
| Monel 401 | 0.10 | - | - | - | 43.0 | - | - | - | 53.0 | - | - | 0.75 | Si 0.25; Mn 2.25 |
| Monel 404 | 0.15 | - | 52.0-57.0 | - | - | 0.05 | rest/bal | - | - | 0.50 | Mn 0.10; Si 0.10;S o.024 | ||
| Monel 502 | 0.10 | - | - | - | 63.0-17.0 | - | - | 2.5-3.5 | rest/bal | - | 0.50 | 2.0 | Mn 1.5;Si 0.5; S 0.010 |
| Monel K 500 | 0.13 | - | - | - | 64.0 | - | - | 2.8 | 30.0 | - | 0.6 | 1.0 | Mn 0.8 |
| Monel R 405 | 0.15 | - | - | - | 66.0 | - | - | - | 31.0 | - | - | 1.2 | Mn 1.0; S 0.04 |
| Tensile strength, Ultimate | 550 Mpa |
| Tensile strength, Yield | 240 Mpa |
| Elongation at Break | 48% |
| UNS N04400 Monel 400 Rectangular Bars | UNS 4400 Monel Polished Bars Stock |
| Monel 400 Square Bars Bright | Monel 400 Grade Bright Bars Cold Drawn |
| ASTM B164 Alloy 400 Square Bars Annealed | Monel 400 UNS N04400 Bright Bars Flat |
| Monel 2.4360 Threaded Bars M16 | Monel 400 Threaded Rods |
| Alloy 400 Monel 2.4360 Rectangular Bars Cold Drawn | Werkstoff 2.4360 Monel Polished Square Bars |
| Monel 2.4360 Rectangular Bars Polished | Monel ASTM B164 Polished Round Bars |
| 2.4360 Monel 400 Threaded Bars M12 | Monel 400 ASTM B164 Threaded Bars Stock |
| Monel UNS N04400 Square Bars | UNS N04400 Monel 400 Polished Flat Bars |
| 2.4360 Monel 400 Rectangular Bars Bright | Monel Grade 400 Bright Bars Hollow |
