ASTM B425 UNS N08825 Rod and Alloy 825 Hex Bar manufacturer in India

 

Incoloy 825 Round Bar

 

We help you to save your cost by providing exact size of 2.4858 Inconel Alloy Hex/Flat/Square Bar

The ability of nickel alloys to withstand extremely high temperatures is one of their key advantages. The ASTM B425 UNS N08825 Bar Stock, which has a nickel concentration of between 38 and 46 percent, can resist moderately high temperature ranges without experiencing any loss in tensile strength. The Incoloy 825 Square bar is thought to offer a value addition in applications involving nuclear fuel reprocessing because of this feature. Nuclear reprocessing involves separating compounds from used nuclear fuel, including excess uranium and fission products.

Fission emits heat, thus the processing of their products will need alloys like the UNS N08825 Bright Bar that have a very high heat tolerance. The 2.4858 Alloy 825 Rod also exhibits resistance to thermal creep deformation due to the alloy's status as a superalloy. This indicates that even under high loads, the material is resistant to deformation. Therefore, in addition to applications involving high temperature, this alloy may also be used in applications involving high pressure.

The appropriate nickel concentration of Inconel 825 Hex Bar makes it helpful in environments where corrosion is likely to occur, whereas most stainless steels fail as a result of stress-related corrosion cracking caused by chlorine ions. At temperatures of 1000°F, Alloy 825 Flat Bar has good mechanical characteristics. However, use of the alloy above 1000°F causes microstructural changes that reduce ductility and impact strength.

before buy compare price of Incoloy 825 Round bar with inconel 600 round bar price list

Incoloy 825 Round Bar Specification Table
Dimensions DIN, EN, ASTM, JIS, ASME, BS, AISI
Round bars size Diameter: 3-~800mm
Flat bars size Thickness: 2 -100mm
Width: 10 to 500mm
Angle bars size 3mm*20mm*20mm~12mm*100mm*100mm
Channel bars 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Rectangular barsSection 3.0 to 12.0mm thickness
Billet Size 1/2 to 495mm Diameter
Rectangles Size 33 x 30mm to 295 x 1066mm
Hollow bars 32mm OD x 16mm ID to 250mm OD x 200mm ID)
Dimensions Diameter / Height:

Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Surface Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished
Condition Hardened & tempered, annealed
Technique Stainless Steel Cold Drawn, Hot Rolled, Forged Round bars,Cold Rolled, Rod
Processing bars cutting to 650mm
Form Rod, Round, Channel bars, T-bars, Flat bars, Precision Ground bars, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round bars, Ingot, Billet, I/H bars, Forging etc.

 

Incoloy 825 Round Bar price
Description Per Unit (INR) Price in USD Price in EURO
Non Grinded Billet Alloy 825 530 7.17 5.99
Incoloy 825 Round Bar Size L 350 Mm*d150 Mm 998 13.49 11.28
Bar Alloy 825 (Nicrofer 4221 ) 2.4858/uns N08825 For Incoloy 825 Section Ses 26-724 Rev 2 40 Dia X3.000-5486,000mm 938 13.49 11.28
Nickel Alloy Secondary Defective Round Bars Grade 825 425 5.75 4.80
Bar Incoloy 825 (Nicrofer 4221 ) 2.4585/uns N08825 For Incoloy 825 Section Ses 26-724 Rev 2 70 Dia X3.000-5486,000mm 969 13.10 10.95
Bar Incoloy 825 (Nicrofer 4221 ) 2.4585/uns N08825 For Incoloy 825 Section Ses 26-724 Rev 2 70 Dia X3.000-5486,000mm 969 13.10 10.95
Incoloy Bright Bars Incoloy 825 ( Size: Dia. 9 Mm - 152 Mm ) 691 9.34 7.81
Nickel Alloy Bars / Rods - Alloy 825 Bar- 40.00mm Dia Astm B425 (Uns N08825) (Quantity 1pcs Unit Price Usd 242.50) 4,535 61.31 51.25
Incoloy Bars / Rods - Alloy 825 Pipe-3/4nb X Sch 80 Astm B423 (Uns No 8825) (Quantity 1pcs Unit Price Usd 242.50) 4,524 61.17 51.13
Nickel Alloy Wire Incoloy 825 Wire 2.4mm 902 12.20 10.19
Nickel Alloy Bar Incoloy 825 ( Size: 50.8 - 125 Mm X 31.75 - 3000 Mm ) 753 10.18 8.51
Nickel Alloy Wire Rod Incoloy 825 ( Size: 14 Mm ) 753 10.18 8.51
Nickel Alloy Defective Round Bars Grade 825 308 4.16 3.48

 

packaging of DIN 2.4858 Rod
incoloy 825 round bar packaging
alloy 825 rod packaging

 

Inconel 825 Hex Bar Size chart
Incoloy hex bars Size in Inches
Incoloy hex bar Wt per Ft
Incoloy hex bar Wt per 12′
3/16″
0.104
1.248
1/4″
0.180
2.160
5/16″
0.290
3.480
3/8″
0.625
4.920
7/16″
0.560
6.72
1/2″
0.740
8.880
9/16″
0.930
11.16
5/8″
1.150
13.80
11/16″
1.390
16.68
3/4″
1.660
19.92
13/16″
1.950
23.40
7/8″
2.300
27.60
15/16″
2.625
31.20
1″
2.90
34.80
1-1/16″
3.30
39.60
1-1/8″
3.700
44.40
1-1/4″
4.625
55.20
1-5/16″
5.100
61.20
1-3/8″
5.625
67.20
1-7/16″
6.100
73.20
1-1/2″
6.625
79.20
1-5/8″
7.800
93.60
1-3/4″
9.030
108.36
1-7/8″
10.400
124.80
2″
11.80
141.60
2-1/4″
14.920
179.04
2-3/8″
16.920
203.04
2-1/2″
18.42
221.04
3″
26.53
318.36

 

Incoloy 825 Square bar standard
  • DIN 17753
  • ASME Code Case N-572
  • ASTM B 425
  • VdTUV 432
  • DIN 17754
  • BS 3076 NA16
  • ASME SB 425
  • ASTM B 564
  • ASME SB 564
  • DIN 17752

 

DIN 2.4858 Flat Bar Size table
Incoloy 825 Flat Bars– metric sizes and weights
Flat Size
KG’s per Metre
Standard Length (metres)
Colour Code
10 x 3
0.24
6.0
Blue
13 x 3
0.31
6.0
Blue
13 x 5
0.46
6.0
Orange
16 x 3
0.38
6.0
Blue
16 x 5
0.64
6.0
Orange
16 x 8
1.03
6.0
Red
20 x 3
0.48
6.0
Blue
20 x 5
0.81
6.0
Orange
20 x 6
0.97
6.0
White
20 x 10
1.61
6.0
Yellow
25 x 3
0.60
6.0
Blue
25 x 5
1.01
6.0
Orange
25 x 6
1.21
6.0
White
25 x 8
1.61
6.0
Red
25 x 10
2.01
6.0
Yellow
25 x 12
2.41
6.0
Pink
32 x 3
0.77
6.0
Blue
32 x 5
1.29
6.0
Orange
32 x 6
1.55
6.0
White
32 x 8
2.06
6.0
Red
32 x 10
2.58
6.0
Yellow
32 x 12
3.09
6.0
Pink
40 x 3
0.97
6.0
Blue
40 x 5
1.61
6.0
Orange
40 x 6
1.93
6.0
White
40 x 8
2.58
6.0
Red
40 x 10
3.22
6.0
Yellow
40 x 12
3.86
6.0
Pink
40 x 16
5.15
6.0
Grey
40 x 20
6.14
6.0
Green
50 x 3
1.21
6.0
Blue
50 x 5
2.01
6.0
Orange
50 x 6
2.41
6.0
White
50 x 8
3.22
6.0
Red
50 x 10
4.02
6.0
Yellow
50 x 12
4.83
6.0
Pink
50 x 16
6.44
6.0
Grey
50 x 20
8.05
6.0
Green
50 x 25
10.1
6.0
Purple
65 x 3
1.57
6.0
Blue
65 x 5
2.62
6.0
Orange
65 x 6
3.14
6.0
White
65 x 8
4.18
6.0
Red
65 x 10
5.23
6.0
Yellow
65 x 12
6.28
6.0
Pink
65 x 16
8.37
6.0
Grey
65 x 20
10.5
6.0
Green
65 x 25
13.1
6.0
Purple
75 x 5
3.02
6.0
Orange
75 x 6
3.62
6.0
White
75 x 8
4.83
6.0
Red
75 x 10
6.04
6.0
Yellow
75 x 12
7.24
6.0
Pink
75 x 16
9.66
6.0
Grey
75 x 20
12.1
6.0
Green
75 x 25
15.1
6.0
Purple
75 x 40
24.1
6.0
Yellow
90 x 5
3.62
6.0
Orange
90 x 6
4.35
6.0
White
90 x 8
5.79
6.0
Red
90 x 10
7.24
6.0
Yellow
90 x 12
8.69
6.0
Pink
100 x 5
4.02
6.0
Orange
100 x 6
4.83
6.0
White
100 x 8
6.44
6.0
Red
100 x 10
8.05
6.0
Yellow
100 x 12
9.66
6.0
Pink
100 x 16
12.9
6.0
Grey
100 x 20
16.1
6.0
Green
100 x 25
20.1
6.0
Purple
100 x 50
40.2
6.0
Green
110 x 6
5.31
6.0
White
110 x 8
7.08
6.0
Red
110 x 10
8.85
6.0
Yellow
110 x 12
10.6
6.0
Pink
130 x 5
5.23
6.0
Orange
130 x 6
6.28
6.0
White
130 x 8
8.37
6.0
Red
130 x 10
10.5
6.0
Yellow
130 x 12
12.6
6.0
Pink
130 x 16
16.7
6.0
Grey
130 x 20
20.9
6.0
Green
130 x 25
26.2
6.0
Purple
150 x 5
6.04
6.0
Orange
150 x 6
7.24
6.0
White
150 x 8
9.66
6.0
Red
150 x 10
12.1
6.0
Yellow
150 x 12
14.5
6.0
Pink
150 x 16
19.3
6.0
Grey
150 x 20
24.1
6.0
Green
150 x 25
30.1
6.0
Purple
150 x 50
60.4
6.0
Green
180 x 5
7.24
6.0
Orange
180 x 6
8.69
6.0
White
180 x 10
14.5
6.0
Yellow
180 x 12
17.4
6.0
Pink
180 x 16
23.2
6.0
Grey
180 x 20
29.0
6.0
Green
180 x 25
36.2
6.0
Purple
200 x 6
9.66
6.0
White
200 x 8
12.9
6.0
Red
200 x 10
16.1
6.0
Yellow
200 x 12
19.3
6.0
Pink
200 x 16
25.7
6.0
Grey
200 x 20
32.2
6.0
Green
200 x 25
40.3
6.0
Purple
250 x 6
12.1
6.0
White
250 x 8
16.1
6.0
Red
250 x 10
20.1
6.0
Yellow
250 x 12
24.1
6.0
Pink
250 x 16
32.2
6.0
Grey
250 x 20
40.2
6.0
Green
250 x 25
50.3
6.0
Purple
300 x 6
14.5
6.0
White
300 x 8
19.3
6.0
Red
300 x 10
24.1
6.0
Yellow
300 x 12
29.0
6.0
Pink
300 x 16
38.6
6.0
Grey
300 x 20
48.3
6.0
Green
300 x 25
60.4
6.0
Purple

 

UNS N08825 Bright Bars Condition
H&T
Hardened and tempered.
ANN
Annealed
PH
Precipitation hardened.

 

Stock list of ASTM B425 UNS N08825 Bar
Incoloy 825 - Round

* CG - Centerless Ground
1/2 CG Incoloy 825 Round Bar
5/8 CG Incoloy 825 Round Bar
3/4 CG Incoloy 825 Round Bar
7/8 CG Incoloy 825 Round Bar
1 CG Incoloy 825 Round Bar
1-1/8 CG Incoloy 825 Round Bar
1-1/4 CG Incoloy 825 Round Bar
1-3/8 CG Incoloy 825 Round Bar
1-1/2 CG Incoloy 825 Round Bar
1-3/4 CG Incoloy 825 Round Bar
2 CG Incoloy 825 Round Bar
2-1/4 CG Incoloy 825 Round Bar
2-1/2 CG Incoloy 825 Round Bar
3 CG Incoloy 825 Round Bar

 

Incoloy
Product form
Dimension (in mm)
Incoloy 825 (42 Ni/22 Cr/3 Mo)
Round bar, Rod annealed, peeled
Dia=16.0, Weight=1.6 kg/m
Incoloy 825 (42 Ni/22 Cr/3 Mo)
Round bar, Rod hot rolled, annealed, peeled
Dia=20.0, Weight=2.6 kg/m
Incoloy 825 (42 Ni/22 Cr/3 Mo)
Round bar, Rod hot rolled, annealed, peeled
Dia=30.0, Weight=6.1 kg/m
Incoloy 825 (42 Ni/22 Cr/3 Mo)
Round bar, Rod hot rolled, annealed
Dia=40.0, Weight=9.85 kg/m
Incoloy 825 (42 Ni/22 Cr/3 Mo)
Round bar, Rod hot rolled, annealed
Dia=45.0, Weight=13.0 kg/m
Incoloy 825 (42 Ni/22 Cr/3 Mo)
Round bar, Rod annealed, peeled
Dia=50.0, Weight=16.0 kg/m
Incoloy 825 (42 Ni/22 Cr/3 Mo)
Round bar, Rod hot rolled, annealed, peeled
Dia=70.0, Weight=31.7 kg/m
Incoloy 825 (42 Ni/22 Cr/3 Mo)
Round bar, Rod annealed, peeled
Dia=90.0, Weight=52.0 kg/m
Incoloy 825 (42 Ni/22 Cr/3 Mo)
Round bar, Rod annealed, peeled
Dia=100.0, Weight=64.0 kg/m
Incoloy 825 (42 Ni/22 Cr/3 Mo)
Round bar, Rod annealed, peeled
Dia=125.0, Weight=99.9 kg/m
Incoloy 825 (42 Ni/22 Cr/3 Mo)
Round bar, Rod annealed, peeled
Dia=150.0, Weight=143.85 kg/m
Incoloy 825 (42 Ni/22 Cr/3 Mo)
Round bar, Rod annealed, peeled
Dia=170.0, Weight=184.8 kg/m
Incoloy 825 (42 Ni/22 Cr/3 Mo)
Round bar, Rod annealed, peeled
Dia=200.0, Weight=255.75 kg/m

 

Incoloy 825 Round Bars Melting Point
Element Incoloy 825
Melting Point 1400 °C (2550 °F)

 

Incoloy 825 round Barsforms & shapes
  • Square
  • Precision Ground Bars
  • Hollow
  • T-Bars
  • Blocks
  • Round Rod
  • Rod
  • Flat Bars
  • Channel Bars
  • Round
  • Rings
  • Rectangle
  • I/H Bars
  • Hex (A/F)
  • Profiles
  • Forging
  • Rectangular Bar
  • Threaded
  • Ingot
  • Half Round Bars
  • Billet
  • Triangle

 

UNS N08825 Round BarsWeights
Round Bar
Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr
3mm 0.017 0.055 20mm 0.753 2.470 3" 10.900 35.762
1/8" 0.019 0.062 22mm 0.908 2.979 3-1/4" 12.800 41.996
5/32" 0.029 0.095 7/8" 0.926 3.038 3-1/2" 14.850 48.772
4mm 0.030 0.098 24mm 1.080 3.543 3-3/4" 17.001 55.780
3/16" 0.043 0.141 25mm 1.180 3.871 4" 19.306 63.340
5mm 0.047 0.154 1" 1.210 3.970 4-1/4" 21.908 72.249
7/32" 0.058 0.190 26mm 1.271 4.170 4-1/2" 24.4487 80.340
6mm 0.068 0.223 27mm 1.368 4.490 4-3/4" 27.366 90.249
1/4" 0.076 0.249 1-1/8" 1.534 5.033 5" 30.461 99.940
7mm 0.091 0.298 30mm 1.691 5.548 5-1/2" 36.690 121.000
5/16" 0.118 0.387 1-1/4" 1.924 6.349 6" 43.860 143.900
8mm 0.120 0.398 32mm 1.894 6.314 6-1/2" 51.093 167.630
9mm 0.152 0.498 1-3/8" 2.303 7.550 7" 59.432 196.000
3/8" 0.170 0.557 35mm 2.390 7.553 7-1/2" 68.226 225.000
10mm 0.189 0.620 36mm 2.438 7.999 8" 77.586 254.55
11mm 0.228 0.748 38mm 2.792 8.903 10" 121.048 397.140
7/16" 0.232 0.761 1-1/2" 2.715 8.951      
12mm 0.271 0.889 40mm 3.009 9.872      
1/2" 0.303 0.994 1-5/8" 3.200 10.449      
13mm 0.318 1.043 1-3/4" 3.712 12.179      
14mm 0.368 1.207 45mm 3.807 12.555      
9/16" 0.383 1.256 1-7/8" 4.260 13.977      
15mm 0.424 1.391 48mm 4.330 14.205      
5/8" 0.473 1.551 50mm 4.698 15.414      
16mm 0.481 1.578 2" 4.848 15.906      
17mm 0.543 1.791 2-1/8" 5.475 17.963      
11/16" 0.573 1.880 2-1/4" 6.135 20.128      
18mm 0.610 2.001 60mm 6.768 22.205      
3/4" 0.682 2.237 2-3/8" 6.838 22.435      
      2-1/2" 7.576 24.856      
      2-5/8" 8.354 27.409      
      2-3/4" 9.169 30.083

 

DIN 2.4858 Rod Specific Gravity
Specific Gravity
8.14 g/cm3

 

Density of Incoloy 825 bar
Element Incoloy 825
Density 8.14 g/cm3

 

UNS N08825 Bright Barsapplication
  • Construction
  • Offshore and Onshore Services
  • Bridges
  • Engineering
  • Petrochemical Industry
  • Ship Building
  • General Structural Purposes

 

Incoloy 825 Rod Documentation
  • Quality Assurance Plan (QAP)
  • Heat Treatment Charts
  • Form A for the purposes of the Generalized System of Preferences (GSP)
  • Raw Material Test Reports
  • Packing List including net weight and gross weight, number of boxes, Marks and Numbers
  • Fumigation Certificates
  • Material Traceability Records
  • Guarantee Letter
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • NABL approved Laboratory Test Reports
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Commercial Invoice which includes HS Code

 

Types of Inconel UNS N08825 Round Bar
alloy 825 Hex Bar

alloy 825 Hex Bar

Inconel Alloy 825 Rod

Inconel Alloy 825 Rod

incoloy UNS N08825 Round Bar

incoloy UNS N08825 Round Bar

825 Incoloy Flat Bar

825 Incoloy Flat Bar

incoloy 825 Bar Material

incoloy 825 BarsMaterial

incoloy WERKSTOFF NR. 2.4858 Square Bar

incoloy WERKSTOFF NR. 2.4858 Square Bar

ASTM B408 incoloy 825 Annealed Bar

ASTM B408 incoloy 825 Annealed Bar

825 Incoloy Rounds

825 Incoloy Rounds

Nickel Alloy 825HT Bright Bar

Nickel Alloy 825HT Bright Bars

incoloy 825 Din 2.4858 Round Bar Cold Drawn

incoloy 825 Din 2.4858 Round Bars Cold Drawn

ASTM B408 825 Incoloy Black Bar

ASTM B408 825 Incoloy Black Bar

2.4858 Incoloy 825 Polished Bar

2.4858 Incoloy 825 Polished Bar

825H Alloy Round Bar Hot Rolled

825H Incoloy Round Bars Hot Rolled

UNS N08825 Incoloy Flat Bar Cold Drawn

UNS N08825 Incoloy Flat Bar Cold Drawn

Alloy incoloy 825 Flat Bar Hot Rolled

Alloy incoloy 825 Flat Bar Hot Rolled

825 Incoloy Square Bar Hot Rolled

825 Incoloy Square Bar Hot Rolled

Inconel Alloy 825 Round Bar Stock List
Alloy UNS N08825 Hex Rod Cold Drawn Incoloy 825 Nickel Alloy Triangular Rod
Alloy 825 Nickel Threaded Rod M12 Alloy 825 Incoloy Threaded Rod Stock
2.4858 Incoloy 825 Rectangular Rod stock Incoloy 825 Grade Polished Rod Stock
Alloy 825 Incoloy Square Rod Black Incoloy 825 Black Rod
Alloy 825 Nickel Rectangular Rod Bright Incoloy 825 Din 2.4858 Bright Rod Hollow
Incoloy 825 Din 2.4858 Rectangular Rod Black Alloy Incoloy 825 Bright Rod Hex
Incoloy UNS No 8825 Rectangular Rod Cold Drawn Alloy UNS N08825 Polished Square Rod
Alloy 825 Incoloy Hex Rod Black Alloy Incoloy 825 Square Rod

 

Size Chart of Incoloy 825 Round Bar
Metric US Bar ASTM/ Canadian Japanese
Bar Size Diam. (mm) Bar Size Diam. (Inch) Bar Size Diam. (mm2) Bar Size Diam. (mm)
5 5 #2 0.250 10M 100 6 6
5.5 5.5 #3 0.375 15M 200 10 10
6 6 #4 0.500 20M 300 13 13
7 7 #5 0.625 25M 500 16 16
8 8 #6 0.750 30M 700 19 19
9 9 #7 0.875 35M 1000 22 22
10 10 #8 1.000 45M 1500 25 25
11 11 #9 1.125 55M 2500 29 29
12 12 #10 1.250 32 32
14 14 #11 1.375 35 35
16 16 #12 1.500 38 38
18 18 #13 1.625 41 41
20 20 #14 1.750 44 44
22 22 #15 1.875 48 48
25 25 #16 2.000 51 51
28 28 #18 2.250 57 57
32 32
36 36
40 40
44 44
50 50

 

incoloy 825 round bar Finishes
CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled

 

Length of 825 Incoloy Round Bar
  • Metric system: standard length is 9 - 12 metres
  • USA : 40 feet

 

ASTM B408 incoloy 825 Round Bar Sizes
Metric US Bar ASTM/ Canadian Japanese
Bar Size Diam. (mm) Bar Size Diam. (Inch) Bar Size Diam. (mm2) Bar Size Diam. (mm)
5 5 #2 0.250 10M 100 6 6
5.5 5.5 #3 0.375 15M 200 10 10
6 6 #4 0.500 20M 300 13 13
7 7 #5 0.825 25M 500 16 16
8 8 #6 0.750 30M 700 19 19
9 9 #7 0.875 35M 1000 22 22
10 10 #8 1.000 45M 1500 25 25
11 11 #9 1.125 55M 2500 29 29
12 12 #10 1.250 32 32
14 14 #11 1.375 35 35
16 16 #12 1.500 38 38
18 18 #13 1.825 41 41
20 20 #14 1.750 44 44
22 22 #15 1.875 48 48
25 25 #16 2.000 51 51
28 28 #18 2.250 57 57
32 32
36 36
40 40
44 44
50 50

 

Chemical Composition of Nickel Alloy 825HT round bar
Incoloy Grade Ni Cr Fe Mb Ti Cu Mn C S Al Si
Incoloy 825 38.0 – 46.0 19.5 – 23.5 22.0 min 2.5 – 3.5 0.6 – 1.2 1.5 – 3.0 1.0 max 0.05 max 0.03 max 0.2 max 0.5 max

 

Material Properties of 2.4858 Incoloy 825 round bar
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %

 

Equivalent Grade of Incoloy 825 round bar
STANDARD WERKSTOFF NR. UNS GOST AFNOR JIS BS EN OR
Incoloy 825 2.4858 N08825 ЭП703 NFE30C20DUM NCF 825 NA 16 NiCr21Mo XH38BT

 

Tolerances of 825 Incoloy Round Bar
Shape / Section Size, diameter or width across flats Permitted variation
mm mm
Round ≥6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100
+ 0 to - 0.070
+ 0 to - 0.085
+ 0 to - 0.100
+ 0 to - 0.120
+ 0 to - 0.140
Flat (thickness) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.250
+ 0 to - 0.350
Flat (width) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100
> 100 ≦ 130
> 130 ≦ 160
> 160 ≦ 320
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.160
+ 0 to - 0.190
+ 0 to - 0.220
+ 0 to - 0.350
+ 0 to - 1.00
+ 1.00 to - 1.00
Square and
hexagon
≥ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 105
+ 0 to - 0.090
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.160
+ 0 to - 0.250