Simplex Steel
Mail

sales@simplexsteel.com

Inconel Fasteners Manufacturer in India

check inconel bolt torque chart, Supplier of ASTM B166 Inconel Alloy Hex Bolts And Nuts with customized sizes

Table Of Content:

 

Inconel Fasteners

 

buy directly from manufacturer of inconel threaded rod online as per the requirements of customers , check tensile strength and grade

The high value of inconel alloys stems from various factors. The fact that inconel bolt tensile strength remains constant at both high and cryogenic temperatures is one of the fundamental justifications for its importance. Steel typically fails at lower temperatures due to it being brittle. Many Inconel Fasteners Manufacturer in India advise using them at both high and low temperatures because they can handle such high levels of stress and because the alloy is ductile.

Another factor that makes this alloy popular among inconel bolts providers is their capacity to withstand high pressure. The chemical combination of nickel and chromium gives inconel threaded rods a variety of qualities that make them useful in a number of industries. Because inconel bolts and nuts have better tensile and yield strengths than some grades of austenitic stainless steel, they maintain their mechanical qualities at high temperatures.

The fact that Inconel Fasteners exhibit high corrosion resistant capabilities is another factor contributing to the popularity of this alloy among purchasers. Despite the alloy's resistance to marine environments, marine engineering would not typically use an expensive inconel bolt grade. However, inconel nuts bring value to the aerospace sector because of their ability to tolerate high temperatures and their resistance to oxidation.

Check comparision of Inconel Fasteners price with Monel Fasteners price list Before buy

 

Specification of Inconel Fasteners
Standard IS, ANSI, ASTM DIN, ISO, JIS, GB, ASME, BS, UNI and all International Standards
Inconel Fasteners Threads: BSF, UNF METRIC, UNC, BSW or as required
Standard ANSI – American National Standards Institute
  • SS Stud Bolt length are defined in ASME B16.5 standard
  • ANSI B 28.2.4 1M
  • ANSI B 18.2.4 2M
  • ASME B18.5
  • SS Hex nuts are defined in ASME B18.2.2

DIN:DIN 933, DIN 931, DIN 970, DIN 934

UTS – Unified Thread Standard : UNF, NPT, NPTF, UNS, UNC, UNEF

ISO – International Organization for Standardization ISO 4033, : ISO 4032, JIS standards
Inconel Fasteners/ Bolts Size M10, M4, M16, M36 M2.5, M6, M30, M12, M8, M14, M2, M3, M20, M24, M5 to M160
Length 3 mm to 200 mm
Inconel Fasteners Head drive: Phillips, Slotted, Phillips/Slot, Six-Lobe etc
Test Certificate as per EN 10204 / 3.1 Manufacturer Test Certificate
Finishing Zinc white, (yellow, black, blue), black oxide,
Dacroment, Geometry, plated zinc-nickel, anodizing, nickel plated, Stainless steel: Passivated
Self-Colour, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, Stainless Steel, some special one like DACROMET and Mechanically Applied coating
raw materials of Source JSPL, Usha Martin, Tata Steel, Mukund Steel, RINL, Dhamm Steel etc.
Form Square, Hex, Threading as per Gauge, Round Etc.
Inconel Fasteners Process of Production M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element
Surface Coating
  • Xylon Coated Fasteners
  • Phosphate Coated Fasteners
  • Hot Dipped Galvanizing Coated Fasteners
  • Teflon Coated Fasteners
  • Zinc Coated Fasteners
  • Cadmium Coated Fasteners
  • Ptfe Coated Stainless Steel Fasteners
Inconel Fasteners Packing IN BULK: pallet, canton, carton / Small Boxs / pallet or customer request

 

Inconel Fasteners Price in india
Description Per Unit (INR) Price in USD Price in EURO
Inconel 600 Stud Bolt With 2 Un Heavy Hex, Nuts In Gr. Uns No.6600, Unc Thread.size: 3/4 Dia X 140 Mm Long 2,955 40.04 33.03
Hex Bolt Ft 1/2 - 13unc X 60mm B18.2.1- Inconel 625 Other Screws And Bolts W/nwith Their Nuts Or Washers Threaded 401 5.43 4.48
Hex Bolt Ft 1/2 - 13unc X 60mm B18.2.1- Inconel 625 Other Screws And Bolts W/nwith Their Nuts Or Washers Threaded 321 4.35 3.59
Hex Bolt Ft 1/2 - 13unc X 60mm B18.2.1- Inconel 625 Other Screws And Bolts W/nwith Their Nuts Or Washers Threaded 401 5.43 4.48
Stud Bolt, Astm A193-b7 W/2 Hex Nuts, A194-2h, Inconel Belleville Washer Unc 7/8x 175mm Long 436 5.91 4.87
Stud Bolt, Astm A193-b7 W/2 Hex Nuts, A194-2h, Inconel Belleville Washer Unc 1x170 Mm Long 482 6.53 5.39
Stud Bolt, Astm A193-b7 W/2 Hex Nuts, A194-2h, Inconel Belleville Washer Unc 7/8x 125 Mm Long 436 5.91 4.87

 

Inconel Alloy Nut Weight Chart
Size Finished Hex Heavy Hex Finished Jam Heavy Hex Jam Square Heavy Square
1/2″ 3.75 6.54 2.62 4.00 5.78 7.87
5/8″ 7.33 11.9 4.93 6.96 10.8 14.3
3/4″ 11.9 19.3 7.70 11.0 15.4 23.5
7/8″ 19.0 29.7 12.0 16.7 24.5 36.2
1″ 28.3 42.5 17.6 23.5 36.3 51.5
11/8″ 40.3 59.2 24.7 32.4 52.5 72.4
11/4″ 54.3 78.6 36.1 45.8 70.6 95.5
13/8″ 73.0 102 47.9 59.3 94.5 125.0
11/2″ 94.3 131 60.9 74.8 122 161
15/8″ 162 91.6
13/4″ 151 204 100 114
17/8″ 241 134
2″ 224 299 140 165
21/4″ 419 227
21/2″ 564 332
23/4″ 738 429
3″ 950 545
31/4″ 1194 651
31/2″ 1526 851
33/4″ 1812 1005
4″ 2180 1200

 

ASTM B166 Inconel Alloy Hex Bolts And Nuts Finishes
  • Zinc and Chromate Fasteners: Silvery and offers resistant to corrosion.
  • Zinc Plated Fasteners: Coated with Zinc.
  • Plain Finish Fasteners: No Coating.
  • Hot Dipped Galvanized(HDG) Fasteners: Offers superior resistant to corrosion due to the dipping of Fasteners in the molten zinc.
  • Zinc and Yellow Chromate Fasteners: Offers better resistant to corrosion.

ASTM B166 Inconel Alloy Hex Bolts And Nuts Finishes

 

Types of Inconel Fasteners
Inconel Alloy Hex Bolts

Inconel Alloy Hex Bolts

Inconel Heavy Hex Bolts

Inconel Heavy Hex Bolts

Inconel Lag Bolts

Inconel Lag Bolts

Inconel Anchor Bolts

Inconel Anchor Bolts

ASME SB166 Inconel Carriage Bolts

ASME SB166 Inconel Carriage Bolts

Inconel Countersunk Bolts

Inconel Countersunk Bolts

Inconel Alloy Stud Bolts

Inconel Alloy Stud Bolts

B166 Inconel Allen Cap Bolt

B166 Inconel Allen Cap Bolt

ASTM B166 Inconel Alloy Tie Bars

ASTM B166 Inconel Alloy Tie Bars

Inconel Alloy Threaded Rod

Inconel Alloy Threaded Rod

ASME SB166 Inconel Double Ended Studs

ASME SB166 Inconel Double Ended Studs

Inconel Tie Rods

Inconel Tie Rods

B166 Inconel Acorn Nuts

B166 Inconel Acorn Nuts

Inconel Alloy Coupling Nuts

Inconel Alloy Coupling Nuts

B166 Inconel Alloy T Nuts

B166 Inconel Alloy T Nuts

Inconel Panel Nuts

Inconel Panel Nuts

Inconel Eye Nuts

Inconel Eye Nuts

Inconel Alloy Lock Nuts

Inconel Alloy Lock Nuts

ASME SB166 Inconel Nylon Insert Nuts

ASME SB166 Inconel Nylon Insert Nuts

ASME SB166 Inconel Square Nuts

ASME SB166 Inconel Square Nuts

ANSI / ASME Standards for Inconel Fasteners
B18.1.1 Small Solid Rivets B18.8.1 Clevis Pins and Cotter Pins
B18.1.2 Large Rivets B18.8.2 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins
B18.2.1 Square and Hex Bolts and Screws B18.9 Plow Bolts
B18.2.2 Square and Hex Nuts B18.10 Track Bolts and Nuts
B18.2.6 Fasteners for use in Structural Applications B18.11 Miniature Screws
B18.3 Socket Cap, Shoulder and Set Screws B18.13 Screw and Washer Assemblies (Sems)
B18.5 Round Head Bolts B18.15 Forged Eyebolts
B18.6.2 Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws B18.17 Wing Nuts, Thumb Screws and Wing Screws
B18.6.3 Machine Screws and Machine Screw Nuts B18.21.1 Lock Washers
B18.6.4 Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws B18.22.1 Plain Washers
B18.7 General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps B18.23.1 Beveled Washers
Available Inconel Fasteners at our end

 

M3 to M72 Inconel Fasteners Standard Grades
Hexagon Bolts / Set Screws
Stud Bolts
Hexagon Nuts
Socket Cap screws
DIN 931
BS4882
DIN 934
DIN 912
DIN 933
DIN 976
BS 1768
DIN 6912
BS 1768
BS 1769
DIN 7984
UNI 5731
BS 1083
ANSI B18.3
UNI 5739
BS 3692
ISO 4762
ISO 4014
ISO 4032
UNI 5931
ISO 4017
ISO 4033
BS 2470
BS 1769
ANSI B18.2.2
BS 4168
BS 3692
ANSI B18.2.1

 

Socket & Slotted Set Screws
Socket & Slotted Countersunk Screws
Studs
Washers
DIN 913
DIN 963
DIN 938
DIN 125
DIN 914
DIN 7991
DIN 939
DIN 9021
DIN 915
BS 4168
DIN 2510
BS 4320
DIN 916
BS 1981
BS 4439
BS 3410
DIN 551
BS 483
BS 2693
DIN 553
BS 2470
Spring Washers
DIN 438
DIN 127
BS 4168
BS 4464
BS 1802

 

inconel Stud Bolt Torque Chart
Flange
Size
B16.5 Class 150 RF/ Ring Gaskets
B16.5 Class 150 FF/ Full Face Gaskets
Torque / Round (ft-lbs)
Stud Bolts Tighten Sequence
Torque / Round (ft-lbs)
Stud Bolts Tighten Sequence
1st
2nd
Final
Dwg/No.
Bolt Size
1st
2nd
Final
Dwg*/No.
Bolt Size
1/2
10
20
30
4-bolt
1/2
20
40
60
4-bolt
1/2
3/4
13
27
40
4-bolt
1/2
20
40
60
4-bolt
1/2
1
15
30
50
4-bolt
1/2
20
40
60
4-bolt
1/2
1-1/4
20
40
60
4-bolt
1/2
20
40
60
4-bolt
1/2
1-1/2
20
40
60
4-bolt
1/2
20
40
60
4-bolt
1/2
2
40
80
120
4-bolt
5/8
40
80
120
4-bolt
5/8
2-1/2
40
80
120
4-bolt
5/8
40
80
120
4-bolt
5/8
3
40
80
120
4-bolt
5/8
40
80
120
4-bolt
5/8
3-1/2
40
80
120
8-bolt
5/8
40
80
120
8-bolt
5/8
4
40
80
120
8-bolt
5/8
40
80
120
8-bolt
5/8
5
60
120
200
8-bolt
3/4
60
120
200
8-bolt
3/4
6
60
120
200
8-bolt
3/4
60
120
200
8-bolt
3/4
8
60
120
200
8-bolt
3/4
60
120
200
8-bolt
3/4
10
95
190
320
12-bolt
7/8
95
190
320
12-bolt
7/8
12
95
190
320
12-bolt
7/8
95
190
320
12-bolt
7/8
14
147
294
490
12-bolt
1
147
294
490
12-bolt
1
16
147
294
490
16-bolt
1
147
294
490
16-bolt
1
18
213
426
710
16-bolt
1-1/8
213
426
710
16-bolt
1-1/8
20
213
426
710
20-bolt
1-1/8
213
426
710
20-bolt
1-1/8
24
300
600
1,000
20-bolt
1-1/4
300
600
1,000
20-bolt
1-1/4

 

Flange Size
B16.5 Class 300 RF/ Ring Gaskets
Torque / Round (ft-lbs)
Stud Bolts Tighten Sequence*
1st
2nd
Final
Dwg/No.
Stud Bolts Size
1/2
10
20
30
4-bolt
1/2
3/4
15
30
50
4-bolt
5/8
1
21
42
70
4-bolt
5/8
1-1/4
30
60
100
4-bolt
5/8
1-1/2
45
90
150
4-bolt
3/4
2
33
66
110
8-bolt
5/8
2-1/2
42
84
140
8-bolt
3/4
3
60
120
200
8-bolt
3/4
3-1/2
60
120
200
8-bolt
3/4
4
60
120
200
8-bolt
3/4
5
60
120
200
8-bolt
3/4
6
60
120
200
12-bolt
3/4
8
95
190
320
12-bolt
7/8
10
147
294
490
16-bolt
1
12
213
426
710
16-bolt
1-1/8
14
195
390
650
20-bolt
1-1/8
16
273
546
910
20-bolt
1-1/4
18
300
600
1,000
24-bolt
1-1/4
20
300
600
1,000
24-bolt
1-1/4
24
465
930
1,550
24-bolt
1-1/2

 

Inconel Threaded Rod Features
  • Severe vibration under impulse pressure
  • Dimensional preciseness
  • Study construction
  • Static pressure
  • Corrosion resistance
  • Perfect installation & application
  • Long service life
  • High tolerance

 

Inconel Alloy Washer Weight Chart

APPROX. WEIGHT IN KGS FOR 100 NOS
SIZE PLAIN PUNCHED WASHER
IS:2016		 HEAVY WASHER
IS:6610		 MACHINED WASHER
IS:2016		 SQUARE TAPER WASHERS SPRING WASHER FLAT SECTION IS:3063-72 SPRING WASHER SQUARE SECTION IS:6735-72
DIN : 7980		 Size (Inches) PLAIN PUNCHED WASHER
BS:3410 TABLE 7
MACHINED HIGH STRENGTH
FRICTION GRIP
FOR
CHANNELS IS:5372-75		 FOR
I-BEAM IS:5374-75		 TYPE-B
(CHANNELS) IS : 6649-85		 TYPE-C
( I-BEAMS ) IS : 6649-85
M-3 0.01 0.01
M-4 0.02 0.02
M-5 0.04 0.04 0.03 0.03
M-6 0.11 0.11 0.08 0.04 1/4″ 0.21
M-8 0.20 0.21 1.10 1.20 0.16 0.11 5/16″ 0.35
M-10 0.39 1.60 0.40 1.00 1.10 0.25 0.20 3/8″ 0.48
M-12 0.58 1.90 0.62 2.00 2.20 2.00 1.80 0.38 0.23 1/2″ 1.07
M-14 0.82 0.60 0.38
M-16 1.06 2.90 1.13 3.40 3.75 9.00 8.50 0.89 0.59 5/8″ 1.85
M-18 1.27 0.97 0.66
M-20 1.64 4.40 1.72 5.80 6.70 8.50 8.00 1.52 1.23 3/4″ 2.91
M-22 1.75 7.50 7.00 1.65 1.36 7/8″ 4.27
M-24 3.11 6.30 3.30 13.50 16.00 6.50 6.00 2.62 1.81 1″ 6.13
M-27 3.94 8.00 4.23 12.50 15.00 12.00 11.50 2.87 2.06 1.1/8″ 7.69
M-30 5.05 10.10 5.36 16.50 18.70 17.50 16.00 4.43 3.20 1.1/4″ 9.90
M-33 7.10 12.00 7.54 21.00 23.50 23.00 22.50 6.30 3.50
M-36 8.73 14.60 9.20 25.50 29.20 26.50 26.00 6.73 5.25 1.1/2″ 17.24
M-39 12.60 16.70 13.30 28.30 34.50 7.17 5.61
M-42 17.50 20.10 18.30 11.10 8.00
M-45 21.20 22.20 22.00 11.70 8.53
M-48 28.40 26.00 29.40 12.30 9.00 2″ 27.78
M-52 31.90 33.00 18.20
M-56 47.90 19.30
M-60 51.60 20.30
M-64 55.40 21.80
M-68 57.40
M-72 63.40 24.00

 

What is the Difference between Monel and Inconel Fasteners®?

Another metal made of nickel and copper is called Monel®. Monel®, a nickel-chromium alloy, can be used in extreme settings with high heat, just like Inconel®. Monel® metal is made up of a variety of nickel alloys with strong resistance to heat, chemicals, and other environmental factors, including seawater.

Due to its composition of nickel and chromium, Inconel® is resistant to oxidation and is therefore perfect for jobs involving a variety of gases and significant temperature variations. Inconel® would be more suited for uses in the oil and gas extraction, aviation, and medical fields. According to testing, Monel's® copper additive offers it improved erosion resistance and makes it particularly resistant to ocean water as well as hydrochloric and sulfuric acids.

 

Inconel Stud Bolt Size
Class 150 Flanges ASME B16.5 (Stud bolt sizes) Length of Stud Bolts
NPS Outside Diameter of Flange The diameter of Bolt Circle The diameter of Bolt Holes Number of Bolts Diameter of Bolts Raised Face
0.06 in		 Ring Joint
1/2 3 1/2 2 3/8 5/8 4 1/2 2 1/4 –
3/4 3 7/8 2 3/4 5/8 4 1/2 2 1/2 –
1 4 1/4 3 1/8 5/8 4 1/2 2 1/2 3
1 1/4 4 5/8 3 1/2 5/8 4 1/2 2 3/4 3 1/4
1 1/2 5 3 7/8 5/8 4 1/2 2 3/4 3 1/4
2 6 4 3/4 3/4 4 5/8 3 1/4 3 3/4
2 1/2 7 5 1/2 3/4 4 5/8 3 1/2 4
3 7 1/2 6 3/4 4 5/8 3 1/2 4
3 1/2 8 1/2 7 3/4 8 5/8 3 1/2 4
4 9 7 1/2 3/4 8 5/8 3 1/2 4
5 10 8 1/2 7/8 8 3/4 3 3/4 4 1/4
6 11 9 1/2 7/8 8 3/4 4 4 1/2
8 13 1/2 11 3/4 7/8 8 3/4 4 1/4 4 3/4
10 16 14 3/4 1 12 7/8 4 1/2 5
12 19 17 1 12 7/8 4 3/4 5 1/4
14 21 18 3/4 1 1/8 12 1 5 1/4 5 3/4
16 23 1/2 21 1/4 1 1/8 16 1 5 1/4 5 3/4
18 25 22 3/4 1 1/4 16 1 1/8 5 3/4 6 1/4
20 27 1/2 25 1 1/4 20 1 1/8 6 1/4 6 3/4
24 32 29 1/2 1 1/4 20 1 1/4 6 3/4 7 1/4
Class 300 Flanges ASME B16.5 Length of Stud Bolts
NPS Outside Diameter of Flange The diameter of Bolt Circle The diameter of Bolt Holes Number of Bolts Diameter of Bolts Raised Face
0.06 in		 Ring Joint
1/2 3 3/4 2 5/8 5/8 4 1/2 2 1/2 3
3/4 4 5/8 3 1/4 3/4 4 5/8 3 3 1/2
1 4 7/8 3 1/2 3/4 4 5/8 3 3 1/2
1 1/4 5 1/4 3 7/8 3/4 4 5/8 3 1/4 3 3/4
1 1/2 6 1/8 4 1/2 7/8 4 3/4 3 1/2 4
2 6 1/2 5 3/4 8 5/8 3 1/2 4
2 1/2 7 1/2 5 7/8 7/8 8 3/4 4 4 1/2
3 8 1/4 6 5/8 7/8 8 3/4 4 1/4 4 3/4
3 1/2 9 7 1/4 7/8 8 3/4 4 1/4 5
4 10 7 7/8 7/8 8 3/4 4 1/2 5
5 11 9 1/4 7/8 8 3/4 4 3/4 5 1/4
6 12 1/2 10 5/8 7/8 12 3/4 4 3/4 5 1/2
8 15 13 1 12 7/8 5 1/2 6
10 17 1/2 15 1/4 1 1/8 16 1 6 1/4 6 3/4
12 20 1/2 17 3/4 1 1/4 16 1 1/8 6 3/4 7 1/4
14 23 20 1/4 1 1/4 20 1 1/8 7 7 1/2
16 25 1/2 22 1/2 1 3/8 20 1 1/4 7 1/2 8
18 28 24 3/4 1 3/8 24 1 1/4 7 3/4 8 1/4
20 30 1/2 27 1 3/8 24 1 1/4 8 8 3/4
24 36 32 1 5/8 24 1 1/2 9 10

 

Documentation of ASTM B166 Inconel Fasteners
  • NABL approved Laboratory Test Reports
  • Packing List including net weight and gross weight, number of boxes, Marks and Numbers
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Heat Treatment Charts
  • Material Traceability Records
  • Form A for the purposes of the Generalized System of Preferences (GSP)
  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Commercial Invoice which includes HS Code
  • Guarantee Letter
  • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
  • Raw Material Test Reports
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • Quality Assurance Plan (QAP)
  • Fumigation Certificates

 

ASME SB166 Inconel Washers Sizes
Sizes A B C Weight (lbs.) Per 100 Pieces
Inside Diameter Outside Diameter Thickness
1/2 9/16 13/8 0.109 4
5/8 11/16 13/4 0.134 8
3/4 13/16 2 0.148 11
7/8 15/16 21/4 0.165 15
1 11/16 21/2 0.165 19
11/8 11/4 23/4 0.165 22
11/4 13/8 3 0.165 26
13/8 11/2 31/4 0.180 33
11/2 15/8 31/2 0.180 38
15/8 13/4 33/4 0.180 43
13/4 17/8 4 0.180 50
17/8 2 41/4 0.180 57
2 21/8 41/2 0.180 63
21/4 23/8 43/4 0.220 83
21/2 25/8 5 0.238 96
23/4 27/8 51/4 0.259 110
3 31/8 51/2 0.284 130

 

Inconel Alloy Screws Testing
  • Mechanical Testing Such as Tensile of Area
  • Micro and MacroTest
  • Flattening Test
  • Chemical Analysis – Spectro Analysis
  • Flaring Test
  • Hardness Test
  • Intergranular Corrosion (IGC) Test
  • Pitting Resistance Test
  • Positive Material Identification – PMI Testing

 

Mechanical Properties Analysis Of ASME SB166 Inconel Stud Bolts
Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
Psi – 1,35,000 , MPa -930 Psi – 75,000 , MPa – 517 42.5 – –

 

Inconel Fasteners Equivalent Grades

UNS

ASTM

EURO

ALLOY

N06600

B166

2.4816

600

N06601

B166

2.4627

601

N06625

B446

2.4856

625

N07718

B637

1.4668

718

N07750

B637

2.4669

750

N08800

B408

1.4876

800

N08825

B425

2.4858

825

N08925

B805

1.4529

925

 

Inconel Hex Bolt Chemical Compatibility Chart
Inconel Fasteners Element (% By Mass)
Ni Cr Fe Mo Nb Co Mn Cu Al Ti Si C S P B
600 72.0 14.0–17.0 6.0–10.0 1.0 0.5 0.5 0.15 0.015
617 44.2–56.0 20.0–24.0 3.0 8.0–10.0 10.0–15.0 0.5 0.5 0.8–1.5 0.6 0.5 0.15 0.015 0.015 0.006
625 58.0 20.0–23.0 5.0 8.0–10.0 3.15–4.15 1.0 0.5 0.4 0.4 0.5 0.1 0.015 0.015
690 59.5 30 9.2 0.35 0.01 0.02 0.35 0.019 0.003
718 50.0–55.0 17.0–21.0 Balance 2.8–3.3 4.75–5.5 1.0 0.35 0.2–0.8 0.65–1.15 0.3 0.35 0.08 0.015 0.015 0.006
X-750 70.0 14.0–17.0 5.0–9.0 0.7–1.2 1.0 1.0 0.5 0.4–1.0 2.25–2.75 0.5 0.08 0.01

 

Inconel Fasteners Manufacturer in India
Inconel Fasteners & Bolts
Inconel Deck Bolts
Inconel Flat Head Bolts
Inconel Hurricane Bolts
Inconel Barrel Nuts
Inconel Button Head Bolts
Inconel Coach Bolts
Inconel Header Bolts
Inconel Weld Nuts
Inconel Rivet Nuts
Inconel Bolts
Inconel Automotive Bolts

 

Weight Chart of Inconel Alloy Bolts

MM THREADS AS PER IS 1363/67

APPROXIMATE WEIGHT IN KGS FOR 100 NOS

LENGTH

D      I      A      M      E      T      E      R

M 5

M 6

M 8

M 10

M 12

M 14

M 16

M 18

M 20

M 22
16 mm 0.448 0.743 1.590 3.211
20 mm 0.598 0.812 1.711 3.411 4.892
25 mm 0.660 0.897 1.871 3.660 5.252 8.170
30 mm 0.737 1.010 2.070 3.912 5.574 9.690 10.707 18.657
35 mm 0.804 1.120 2.271 4.223 5.974 10.000 11.416 16.026 19.608
40 mm 0.881 1.230 2.470 4.533 6.410 10.288 12.107 16.667 20.747
45 mm 0.958 1.340 2.671 4.840 6.859 10.504 12.821 17.241 21.739
50 mm 1.030 1.450 2.870 5.155 7.299 11.261 13.624 17.857 22.727 28.409
55 mm 1.560 3.071 5.464 7.740 11.628 14.409 18.868 23.810 30.120
60 mm 1.670 3.270 5.774 8.183 12.255 15.244 20.000 25.126 32.051
65 mm 1.781 3.472 6.083 8.621 12.626 16.026 21.008 26.455 34.014
70 mm 1.890 3.671 6.394 9.058 12.987 16.835 22.124 27.778 35.461
75 mm 2.000 3.873 6.702 9.506 13.228 17.606 23.256 29.070 39.063
80 mm 2.111 4.072 7.013 10.000 13.889 18.248 24.510 30.303 40.000
90 mm 4.472 7.634 10.917 14.925 19.841 26.042 33.113 41.667
100 mm 4.873 8.251 11.820 16.340 21.459 27.778 35.714 46.296
110 mm 8.881 12.723 17.730 23.041 31.250 38.168 47.170
120 mm 9.506 13.624 18.797 24.631 32.895 40.984 50.000
130 mm 10.101 14.535 20.000 26.316 34.722 43.478 52.632
140 mm 10.707 15.432 20.833 27.933 35.461 46.296 55.556
150 mm 11.312 16.340 22.222 29.412 37.594 48.544 58.824
160 mm 11.905 17.241 24.272 31.056 40.984 50.505 61.728
170 mm 12.500 18.116 32.680 53.191 64.935
180 mm 13.123 19.011 26.882 34.247 55.556 67.568
190 mm 13.736 19.920 35.971 58.140 70.423
200 mm 14.327 20.833 29.586 37.594 49.020 60.976 73.529
220 mm 15.528 22.624 40.650 65.789 79.365
240 mm 16.722 24.510 43.860 71.429 84.746
250 mm 17.301 25.381 45.455 74.627 87.719
260 mm 17.921 26.316 47.170 76.923 90.909
280 mm 19.157 28.090 50.505 81.967 98.039
300 mm 20.325 29.940 53.763 87.719 104.167
320 mm 31.646 56.818 92.593
340 mm 33.557 60.241 98.039
360 mm 35.211 63.291 104.167
380 mm 37.037 66.667 108.696
400 mm 39.063 69.444 113.636

 

download
Our Products
Other Products
Blog