Low-cost manufacturer of ASTM A312 Type 316Ti Welded and ERW pipe

 

ASTM A312 TP316Ti Pipe

ASTM A312 TP316Ti Pipe

Stainless Steel 316Ti Seamless Pipe

Stainless Steel 316Ti Seamless Pipe

UNS S31703 ERW Pipe

UNS S31703 ERW Pipe

Before purchasing, check the pricing of DIN 1.4571 square and rectangular pipe in India from a supplier of UNS S31703 schedule 40 pipe.

Titanium was not a component of stainless steel alloy 316's original composition. Austenite is stabilised by the titanium content of the stainless steel 316Ti seamless pipe alloy. The alloy already possesses characteristics that are linked to a strong resistance to corrosion because it is a molybdenum-bearing grade. However, the ASME SA 312 Grade 316Ti Square Pipe has a higher yield strength because to the titanium additive. The alloy also gains from the titanium's ability to tolerate high temperatures.

The fabrication of numerous austenitic stainless steel alloys, including UNS S31703 schedule 40 pipe, specifically uses specification ASTM A312. The specification is mostly appropriate for pipes that may operate at higher temperatures and for applications where general corrosion resistance is required, such as those that call for the usage of DIN 1.4571 Rectangular Pipe. This alloy with molybdenum exhibits resistance to a number of substances and different solutions.

Additionally, the ASTM A312 Type 316Ti ERW Pipe has unbeatable corrosion resistance qualities to acids utilised in the chemical processing industry, including acetic acid, formic acid, hydrochloric acid, sulfuric acid, and tartaric acid. The corrosion resistance characteristics of SS 316Ti Welded Pipe are ideally suited to applications that may contain solutions of both acid sulphates and alkaline chlorides in addition to such potent acids.

 

Stainless Steel 316Ti Seamless Pipe Specification List
Standard Specification ASTM A 312/ ASME SA 312/ A790/ SA790/ EN10216-5
Size ½” to 6” NB Sch 10s, 40s, & 80s, 160s
Wall Thickness 0.1 - 60 mm
SS Seamless Pipe Length
  • Single Random Length 5to7 mtr
  • Double Random Length 10-12 mtr
Seamless SS Pipe Surface Finish Cold Finish, Bright, Polished, Annealing, Pickling, or as per client requirements
Standard JIS, AISI, ASME, ASTM, AMS, GB, DIN, EN, GOST
Manufacturing types Seamless, Welded, ERW, EFW
Manufacturing Shapes Round, Square, Rectangle, Box Section
Manufacturing Technology Hot / Cold Formed
Other Grades SS 446
Inspection, Test Reports EN 10204 3.1, Mill Test Certificates, PMI Test Reports, Chemical Reports, Mechanical Reports, NABL Approved Lab Reports, Visual Inspection Reports, Destructive and Non Destructive Test Reports, Third Party Inspection
Technique Cold Rolled Hot Rolled

 

Sizes of Available ASTM A312 TP316Ti Pipe
  • Size: 4 - 219mm
  • Thickness : 0.5 - 20mm
  • Length: Single, Double Random & Cut Length
SS 316Ti pipe types
Stainless Steel 316Ti Uns S31703 Welded Pipe

Stainless Steel 316Ti Uns S31703 Welded Pipe

ASME SA312 TP316Ti Seamless Pipe

ASME SA312 TP316Ti Seamless Pipe

SA 312 TP 316Ti Stainless Steel Round Pipe

SA 312 TP 316Ti Stainless Steel Round Pipe

Ss 316Ti Rectangular Pipe

Ss 316Ti Rectangular Pipe

316Ti Stainless Steel Square Pipe

316Ti Stainless Steel Square Pipe

Grade SA312 TP316Ti Schedule 5s Pipe

Grade SA312 TP316Ti Schedule 5s Pipe

ASTM A312 TP 316Ti Schedule 40s Seamless Pipe

ASTM A312 TP 316Ti Schedule 40s Seamless Pipe

SA 312 Gr 316Ti Stainless Steel Polished Pipe

SA 312 Gr 316Ti Stainless Steel Polished Pipe

Uns S31703 Stainless Steel Exhaust Pipe

Uns S31703 Stainless Steel Exhaust Pipe

Stainless Steel 316Ti  Thin Wall Pipe

Stainless Steel 316Ti Thin Wall Pipe

Stainless Steel 316Ti Custom Pipe

Stainless Steel 316Ti Custom Pipe

Stainless Steel Din 1.4571 Cold Drawn Seamless Pipe

Stainless Steel Din 1.4571 Cold Drawn Seamless Pipe

ASME SA 312 TP 316Ti Pipe Chemical Properties Table
Grade C Mn Si P S Cr Mo Ni Fe
SS 316Ti 0.08 max 2.0 max 0.75 max 0.045 max 0.030 max 16.00 - 18.00 2.00 - 3.00 10.00 - 14.00 68.395 min

 

AISI 316Ti Seamless Pipe equivalent grades
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316Ti 1.4571 S31635 SUS 316Ti 320S31 08Ch17N13M2T Z6CNDT17-123 X6CrNiMoTi17-12-2

 

TP316Ti Stainless Steel Pipe Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1399 °C (2550 °F) Psi - 75000 , MPa - 515 Psi - 30000 , MPa - 205 35 %
UNS S31703 Pipe Dimension Table
PIPE SIZE OD IN INCHES A.S.A. Pipe Schedules
5s 5 10s 10 40s & Std. 40 60 80s & E.H. 80 120 160 DBL E.H.
1/8 .405   .035.1383 .049.1863 .049.1863 .068.2447 068.2447   0.95.3145 0.95.3145      
1/4 .540   .049.2570 .065.3297 .065.3297 .088.4248 088.4248   .119.5351 .119.5351      
3/8 .675   .049.3276 .065.4235 .065.4235 .091.5676 .091.5676   .126.7338 .126.7338      
1/2 .840 .065.5383 .065.5383 .083.6710 .083.6710 .109.8510 .109.8510   .1471.088 .1471.088   .1871.304 .2941.714
3/4 1.050 .065.6838 .065.6838 .083.8572 .083.8572 .1131.131 .1131.131   .1541.474 .1541.474   .2181.937 .3082.441
1 1.315 .065.8678 .065.8678 .1091.404 .1091.404 .1331.679 .1331.679   .1792.172 .1792.172   .2502.844 .3583.659
1-1/4 1.660 .0651.107 .0651.107 .1091.806 .1091.806 .1402.273 .1402.273   .1912.997 .1912.997   .2503.765 .3825.214
1-1/2 1.900 .0651.274 .0651.274 .1092.085 .1092.085 .1452.718 .1452.718   .2003.631 .2003.631   .2814.859 .4006.408
2 2.375 .0651.604 .0651.604 .1092.638 .1092.638 .1543.653 .1543.653   .2185.022 .2185.022   .3437.444 .4369.029
2-1/2 2.875 .0832.475 .0832.475 .1203.531 .1203.531 .2035.793 .2035.793   .2767.661 .2767.661   .37510.01 .55213.70
3 3.500 .0833.029 .0833.029 .1204.332 .1204.332 .2167.576 .2167.576   .30010.25 .30010.25   .43714.32 .60018.58
3-1/2 4.000 .0833.472 .0833.472 .1204.973 .1204.973 .2269.109 .2269.109   .31812.51 .31812.51     .63622.85
4 4.500 .0833.915 .0833.915 .1205.613 .1205.613 .23710.79 .23710.79 .28112.66 .33714.98 .33714.98 .43719.01 .53122.51 .67427.54
4-1/2 5.000         .24712.53     .35517.61       .71032.53
5 5.563 .1096.349 .1096.349 .1347.770 .1347.770 .25814.62 .25814.62   .37520.78 .37520.78 .50027.04 .62532.96 .75038.55
6 6.625 .1097.585 .1097.585 .1349.290 .1349.290 .28018.97 .28018.97   .43228.57 .43228.57 .56236.39 .71845.30 .86453.16
7 7.625         .30123.57     .50038.05       .87563.08
Medium Type = Wall thickness in inches Bold Type = Steel weight per foot in pounds