Grade 316 and its variants are known as marine grade steel due to being the second most used stainless steel alloy. Simply because its load bearing capacity is around 20% larger, the 316l Stainless Steel Tube Seamless kind is advantageous in high pressure applications. Intergranular corrosion is completely eradicated by the lack of a seamline on the longitudinal portion of the stainless steel 316l seamless round tubing.
Additionally, because this alloy is a low carbon variety, intergranular corrosion is even less likely to occur in stainless steel 316L Seamless Tube. Normally, when the grain boundary is sensitised in the high carbon version of any austenitic stainless steel, the spare carbon atoms form precipitates on the grain boundary and cause intergranular disintegration. The ASTM A213 TP 316L Instrumentation Tube's mechanical properties alter with the presence of nitrogen, similar to other low carbon austenitic 300 series stainless steels. For instance, nitrogen causes the material's yield strength to increase.
The tensile parameters of the SS 316L Cold Rolled Coiled Tubing typically decrease as the carbon content is reduced, including the yield strength. The WERKSTOFF NR. 1.4404 Heat exchanger Tube's lack of yield strength is compensated for by the presence of nitrogen in this alloy. In fact, it increases the alloy's resistance to pitting while also stabilising austenite. Pitting is a typical issue with grade 304, particularly in maritime settings. Therefore, ASTM A249 TP 316L Welded Tube is advised for usage in maritime engineering. One noteworthy quality of the SS 316L ERW Tubing is its resistance to pitting when exposed to extremely corrosive solutions like phosphoric acid and acetic acid.. Along with being able to withstand a 20% phosphoric acid solution, the UNS S31603 U Tube proves itself as a valuable resource in sulfur-containing applications as well.
Comapre price of 316l Stainless Steel Tube with 304 stainless steel tube price list
|
Standard |
ASTM, AISI, GB, JIS, customers' requests available |
|
316L Stainless Steel Tube Size |
Round Tube: OD: 16-119mm or customized |
|
Thickness |
0.25mm-3.0mm |
|
316L Stainless Steel Tube Length |
6m or according to customers' request |
|
Sample |
Free sample is available, but freight should be paid by you |
|
316L Stainless Steel Tube Tolerance
|
Outer diameter: ±0.2mm |
|
Thickness: ±0.05mm |
|
|
Length: ±0.5mm |
|
|
Ends |
In plain end or bevelled ends or as your requirements |
|
Welding Line Type |
ERW (Electrical Resistance Weld) |
|
316L Stainless Steel Tube Finishing
|
A. Sanded |
|
B. Gloss #400,Mirror #600 - #1000 |
|
|
C. Brushed |
|
|
D. Wood Grain |
|
|
E. Embossed, Threaded |
|
|
Application |
Decorations, constructions, food industry, etc. |
|
316L Stainless Steel Tube Certification |
ISO, SGS |
|
Round Pipe Size |
16, 17, 18, 19, 20, 21, 22, 23, 25, 28, 31.8, 35, 36, 38.1, 48, 50.8, 60, 63.5, 76.2, 89, 101, 114 mm |
|
Square Pipe Size |
17, 18, 19, 20, 21, 22, 23, 24, 25, 28, 30, 36, 38, 50 mm |
|
Rectangle Pipe Size |
10*30, 10*40, 10*50, 20*10, 23*11, 24*12, 25*13, 28*25, 28*13, 29*14, 30*15, 30*20, 30*22, 34*22, 36*23, 50*25, 60*30, 75*45, 95*45 mm |
|
316L Stainless Steel Tube Thickness |
exact 0.25, 0.28, 0.32, 0.37, 0.41, 0.51, 0.61, 0.71, 0.91, 1.11, 1.15, 1.41 mm |
|
Length |
6m or according to customer’s request |
|
316L Stainless Steel Tube Outer diameter |
6.35-219mm |
|
Tolerance |
Outer diameter :±0.2mm |
|
Thickness :±0.02mm |
|
|
Length :±0.5mm |
|
|
316L Stainless Steel Tube Process method |
Code drawn, annealed with nitrogen protection, ultrasonic, automatic shape, polished |
|
Test |
Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
|
316L Stainless Steel Tube Equipment |
Press machine, Bending machine, Pushing Machine, electric bevelling machine Sand-blasting machine, etc |
|
Origin |
West Europe / Japanese / Indian / USA / Korean / American / European |
|
316L Stainless Steel Tube Test Certificates |
Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report |
| NPS Designator |
Outside Diameter | Nominal Wall Thickness | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| in. | mm | Schedule 5SA | Schedule 10SA | Schedule 40SA | Schedule 80SA | |||||
| in. | mm | in. | mm | in. | mm | in. | mm | |||
| 8 | 8.625 | 219.08 | 0.109 | 2.77 | 0.148 | 3.76 | 0.322 | 8.18 | 0.500 | 12.70 |
| 10 | 10.750 | 273.05 | 0.134 | 3.40 | 0.165 | 4.19 | 0.365 | 9.27 | 0.500B | 12.70B |
| 12 | 12.750 | 323.85 | 0.156 | 3.96 | 0.180 | 4.57 | 0.375B | 9.52B | 0.500B | 12.70B |
| 14 | 14.000 | 355.60 | 0.156 | 3.96 | 0.188B | 4.78B | … | … | … | … |
| 16 | 16.000 | 406.40 | 0.165 | 4.19 | 0.188B | 4.78B | … | … | … | … |
| 18 | 18.000 | 457.20 | 0.165 | 4.19 | 0.188B | 4.78B | … | … | … | … |
| 20 | 20.000 | 508.00 | 0.188 | 4.78 | 0.188B | 4.78B | … | … | … | … |
| 22 | 22.000 | 558.80 | 0.188 | 4.78 | 0.218B | 5.54B | … | … | … | … |
| 24 | 24.000 | 609.60 | 0.218 | 5.54 | 0.250 | 6.35 | … | … | … | … |
| 30 | 30.000 | 762.00 | 0.250 | 6.35 | 0.312 | 7.92 | … | … | … | … |
| Description | Per Unit (INR) | Price in USD | Price in EURO |
|---|---|---|---|
| Defective Stainless Steel Seamless Pipe/tube Bright Annealeda269 316l Grade | 141 | 1.92 | 1.58 |
| Tht-3r60-12.7-1.65 Fl-60-6000- Astm Asme A/sa213aw A269, Sandvik 3r60, Tp316l, Seamless Stainless Steel Tube, (360 Mtr) | 1,105 | 15.02 | 12.35 |
| Tht-3r60-25.40-3.20 Fl-25-6000- Astm Asme A/sa213aw A269, Sandvik 3r60, Tp316l, Seamless Stainless Steel Tube, (150 Mtr | 915 | 12.44 | 10.23 |
| Stainless Steel Seamless Tube-spec:sa 213 Tp304/304l Size:o.d.19.05mm X W.t.1.65mm X L:27416mm (Qty:15736.80 Mtrs)(Cold | 407 | 5.53 | 4.55 |
| Stainless Steel Seamless Tube 12.7mmod X 1mm Less Than 2.5 Grade Ss 316l (Pcs 2100) | 504 | 6.85 | 5.63 |
| Stainless Steel Seamless Tube 12.7mmod X 1mm Less Than 2.5 Grade Ss 316l | 504 | 6.85 | 5.63 |
| Stainless Steel Seamless Tube-spec:sa 213 Tp304/304l Size:o.d.19.05mm X W.t.1.65mm X L:16187mm (Qty:17595.30 Mtrs)(Cold | 359 | 4.88 | 4.01 |
| Seamless Stainless Steel Pipes/Tube Hot Finish Tp 316l (Odnot Less Than 42 Mm) | 203 | 2.76 | 2.27 |
| Seamless Stainless Steel Pipes/Tube Hot Finish Tp 316l (Odnot Less Than 42 Mm) | 210 | 2.85 | 2.35 |
| Seamless Stainless Steel Pipes/Tube Hot Finish Tp 316l (Odnot Less Than 42 Mm) | 195 | 2.65 | 2.18 |
| Seamless Stainless Steel Hot Finish Pipes / Tube Tp 316l (Od Not Less Than 42 Mm) | 209 | 2.84 | 2.34 |
| Seamless Stainless Steel Pipes/Tube Hot Finish Tp 316l (Odnot Less Than 42 Mm) | 194 | 2.64 | 2.17 |
| Seamless Stainless Steel Tube/pipe(Hot Finished)(Od Not Less Than 42mm) Grade-tp316l-size-42.2*3.56 Length-10-11.8 | 196 | 2.66 | 2.19 |
| Seamless Stainless Steel Hot Finish Pipes / Tube Tp 316l (Od Not Less Than 42 Mm) | 203 | 2.76 | 2.27 |
| Seamless Stainless Steel Pipes/Tube Hot Finish Tp 316l (Odnot Less Than 42 Mm) | 192 | 2.61 | 2.15 |
| Seamless Stainless Steel Pipes/Tube Hot Finish Tp 316l (Odnot Less Than 42 Mm) | 201 | 2.73 | 2.25 |
| Seamless Stainless Steel Tube/pipe(Hot Finished)(Od Not Less Than 42mm) Grade-tp316l-size-42.2*2.77 Length-10-11.8 | 196 | 2.66 | 2.19 |
| Seamless Stainless Steel Pipes/Tube Hot Finish Tp 316l (Odnot Less Than 42 Mm) | 202 | 2.75 | 2.26 |
| Seamless Stainless Steel Pipes/Tube Hot Finish Tp 316l (Odnot Less Than 42 Mm) | 212 | 2.88 | 2.37 |
| Stainless Steel Seamless Tube/pipes Cold Finish & Bright Annealed Grade 316l, A213/a269 | 546 | 7.42 | 6.10 |
| Square Tubing- | Nominal Size | Wall Thickness | Weight per Ft. |
|---|---|---|---|
| 1 1/2x1 1/2-3.35# | 1 1/2 x 1 1/2 in | 0.1875 in | 3.35 lb |
| 1 1/2x1 1/2-3.71# | 1 1/2 x 1 1/2 in | 0.2500 in | 3.71 lb |
| 2x2-4.32# | 2 x 2 in | 0.1875 in | 4.32 lb |
| 2x2-5.41# | 2 x 2 in | 0.2500 in | 5.41 lb |
| 2 1/2x2 1/2-5.59# | 2 1/2 x 2 1/2 in | 0.1875 in | 5.59 lb |
| 2 1/2x2 1/2-7.11# | 2 1/2 x 2 1/2 in | 0.2500 in | 7.11 lb |
| 2 1/2x2 1/2-8.94# | 2 1/2 x 2 1/2 in | 0.3125 in | 8.94 lb |
| 3x3-6.87# | 3 x 3 in | 0.1875 in | 6.87 lb |
| 3x3-8.81# | 3 x 3 in | 0.2500 in | 8.81 lb |
| 3x3-10.58# | 3 x 3 in | 0.3125 in | 10.58 lb |
| 3x3-12.51# | 3 x 3 in | 0.3750 in | 12.51 lb |
| 3 1/2x3 1/2-8.15# | 3 1/2 x 3 1/2 in | 0.1875 in | 8.15 lb |
| 3 1/2x3 1/2-10.51# | 3 1/2 x 3 1/2 in | 0.2500 in | 10.51 lb |
| 3 1/2x3 1/2-12.70# | 3 1/2 x 3 1/2 in | 0.3125 in | 12.70 lb |
| 3 1/2x3 1/2-15.46# | 3 1/2 x 3 1/2 in | 0.3750 in | 15.46 lb |
| 4x4-9.42# | 4 x 4 in | 0.1875 in | 9.42 lb |
| 4x4-12.21# | 4 x 4 in | 0.2500 in | 12.21 lb |
| 4x4-14.83# | 4 x 4 in | 0.3125 in | 14.83 lb |
| 4x4-17.27# | 4 x 4 in | 0.3750 in | 17.27 lb |
| 4x4-21.63# | 4 x 4 in | 0.5000 in | 21.63 lb |
| 4 1/2x4 1/2-10.70# | 4 1/2 x 4 1/2 in | 0.1875 in | 10.70 lb |
| 4 1/2x4 1/2-13.91# | 4 1/2 x 4 1/2 in | 0.2500 in | 13.91 lb |
| 5x5-11.97# | 5 x 5 in | 0.1875 in | 11.97 lb |
| 5x5-15.62# | 5 x 5 in | 0.2500 in | 15.62 lb |
| 5x5-19.08# | 5 x 5 in | 0.3125 in | 19.08 lb |
| OD inches | Ave. Wall inches | Min Yield Strength (PSI) | Min Tensile Strength (PSI) | Theoretical Burst Pressure * (PSI) | Working Pressure (PSI) 25% of Burst | Theoretical Yield Point ** (PSI) | Collapse Pressure *** (PSI) |
|---|---|---|---|---|---|---|---|
| 0.250 | 0.020 | 30,000 | 75,000 | 14,286 | 3,571 | 5,714 | 4,416 |
| 0.250 | 0.028 | 30,000 | 75,000 | 21,649 | 5,412 | 8,660 | 5,967 |
| 0.250 | 0.035 | 30,000 | 75,000 | 29,167 | 7,292 | 11,667 | 7,224 |
| 0.250 | 0.049 | 30,000 | 75,000 | 48,355 | 12,089 | 19,342 | 9,455 |
| 0.250 | 0.065 | 30,000 | 75,000 | 81,250 | 20,313 | 32,500 | 11,544 |
| 0.375 | 0.020 | 30,000 | 75,000 | 8,955 | 2,239 | 3,582 | 3,029 |
| 0.375 | 0.028 | 30,000 | 75,000 | 13,166 | 3,292 | 5,266 | 4,145 |
| 0.375 | 0.035 | 30,000 | 75,000 | 17,213 | 4,303 | 6,885 | 5,077 |
| 0.375 | 0.049 | 30,000 | 75,000 | 26,534 | 6,634 | 10,614 | 6,816 |
| 0.375 | 0.065 | 30,000 | 75,000 | 39,796 | 9,949 | 15,918 | 8,597 |
| 0.500 | 0.020 | 30,000 | 75,000 | 6,522 | 1,630 | 2,609 | 2,304 |
| 0.500 | 0.028 | 30,000 | 75,000 | 9,459 | 2,365 | 3,784 | 3,172 |
| 0.500 | 0.035 | 30,000 | 75,000 | 12,209 | 3,052 | 4,884 | 3,906 |
| 0.500 | 0.049 | 30,000 | 75,000 | 18,284 | 4,571 | 7,313 | 5,304 |
| 0.500 | 0.065 | 30,000 | 75,000 | 26,351 | 6,588 | 10,541 | 6,786 |
| 0.500 | 0.083 | 30,000 | 75,000 | 37,275 | 9,319 | 14,910 | 8,307 |
| 0.625 | 0.020 | 30,000 | 75,000 | 5,128 | 1,282 | 2,051 | 1,859 |
| 0.625 | 0.028 | 30,000 | 75,000 | 7,381 | 1,845 | 2,953 | 2,568 |
| 0.625 | 0.035 | 30,000 | 75,000 | 9,459 | 2,365 | 3,784 | 3,172 |
| 0.625 | 0.049 | 30,000 | 75,000 | 13,947 | 3,487 | 5,579 | 4,335 |
| 0.625 | 0.065 | 30,000 | 75,000 | 19,697 | 4,924 | 7,879 | 5,591 |
| 0.625 | 0.083 | 30,000 | 75,000 | 27,124 | 6,781 | 10,850 | 6,910 |
| 0.625 | 0.095 | 30,000 | 75,000 | 32,759 | 8,190 | 13,103 | 7,734 |
| 0.625 | 0.109 | 30,000 | 75,000 | 40,172 | 10,043 | 16,069 | 8,639 |
| 0.750 | 0.028 | 30,000 | 75,000 | 6,052 | 1,513 | 2,421 | 2,156 |
| 0.750 | 0.035 | 30,000 | 75,000 | 7,721 | 1,930 | 3,088 | 2,669 |
| 0.750 | 0.049 | 30,000 | 75,000 | 11,273 | 2,818 | 4,509 | 3,664 |
| 0.750 | 0.065 | 30,000 | 75,000 | 15,726 | 3,931 | 6,290 | 4,749 |
| 0.750 | 0.083 | 30,000 | 75,000 | 21,318 | 5,330 | 8,527 | 5,905 |
| 0.750 | 0.095 | 30,000 | 75,000 | 25,446 | 6,362 | 10,179 | 6,637 |
| 0.750 | 0.109 | 30,000 | 75,000 | 30,733 | 7,683 | 12,293 | 7,453 |
| 0.750 | 0.120 | 30,000 | 75,000 | 35,294 | 8,824 | 14,118 | 8,064 |
| 0.875 | 0.020 | 30,000 | 75,000 | 3,593 | 898 | 1,437 | 1,340 |
| 0.875 | 0.028 | 30,000 | 75,000 | 5,128 | 1,282 | 2,051 | 1,859 |
| 0.875 | 0.035 | 30,000 | 75,000 | 6,522 | 1,630 | 2,609 | 2,304 |
| 0.875 | 0.049 | 30,000 | 75,000 | 9,459 | 2,365 | 3,784 | 3,172 |
| 0.875 | 0.065 | 30,000 | 75,000 | 13,087 | 3,272 | 5,235 | 4,126 |
| 0.875 | 0.083 | 30,000 | 75,000 | 17,560 | 4,390 | 7,024 | 5,152 |
| 0.875 | 0.095 | 30,000 | 75,000 | 20,803 | 5,201 | 8,321 | 5,807 |
| 0.875 | 0.109 | 30,000 | 75,000 | 24,886 | 6,221 | 9,954 | 6,543 |
| 0.875 | 0.120 | 30,000 | 75,000 | 28,346 | 7,087 | 11,339 | 7,100 |
| 1.000 | 0.028 | 30,000 | 75,000 | 4,449 | 1,112 | 1,780 | 1,633 |
| 1.000 | 0.035 | 30,000 | 75,000 | 5,645 | 1,411 | 2,258 | 2,027 |
| 1.000 | 0.049 | 30,000 | 75,000 | 8,149 | 2,037 | 3,259 | 2,796 |
| 1.000 | 0.065 | 30,000 | 75,000 | 11,207 | 2,802 | 4,483 | 3,647 |
| 1.000 | 0.083 | 30,000 | 75,000 | 14,928 | 3,732 | 5,971 | 4,567 |
| 1.000 | 0.095 | 30,000 | 75,000 | 17,593 | 4,398 | 7,037 | 5,159 |
| 1.000 | 0.109 | 30,000 | 75,000 | 20,908 | 5,227 | 8,363 | 5,827 |
| 1.000 | 0.120 | 30,000 | 75,000 | 23,684 | 5,921 | 9,474 | 6,336 |
| 1.000 | 0.134 | 30,000 | 75,000 | 27,459 | 6,865 | 10,984 | 6,963 |
| 1.250 | 0.035 | 30,000 | 75,000 | 4,449 | 1,112 | 1,780 | 1,633 |
| 1.250 | 0.049 | 30,000 | 75,000 | 6,380 | 1,595 | 2,552 | 2,260 |
| 1.250 | 0.065 | 30,000 | 75,000 | 8,705 | 2,176 | 3,482 | 2,958 |
| 1.250 | 0.083 | 30,000 | 75,000 | 11,485 | 2,871 | 4,594 | 3,719 |
| 1.250 | 0.095 | 30,000 | 75,000 | 13,443 | 3,361 | 5,377 | 4,213 |
| 1.250 | 0.109 | 30,000 | 75,000 | 15,843 | 3,961 | 6,337 | 4,776 |
| 1.250 | 0.120 | 30,000 | 75,000 | 17,822 | 4,455 | 7,129 | 5,207 |
| 1.250 | 0.134 | 30,000 | 75,000 | 20,468 | 5,117 | 8,187 | 5,742 |
| 1.500 | 0.035 | 30,000 | 75,000 | 3,671 | 918 | 1,469 | 1,367 |
| 1.500 | 0.049 | 30,000 | 75,000 | 5,243 | 1,311 | 2,097 | 1,896 |
| 1.500 | 0.065 | 30,000 | 75,000 | 7,117 | 1,779 | 2,847 | 2,487 |
| 1.500 | 0.083 | 30,000 | 75,000 | 9,333 | 2,333 | 3,733 | 3,136 |
| 1.500 | 0.095 | 30,000 | 75,000 | 10,878 | 2,719 | 4,351 | 3,559 |
| 1.500 | 0.109 | 30,000 | 75,000 | 12,754 | 3,188 | 5,101 | 4,043 |
| 1.500 | 0.120 | 30,000 | 75,000 | 14,286 | 3,571 | 5,714 | 4,416 |
| 1.500 | 0.134 | 30,000 | 75,000 | 16,315 | 4,079 | 6,526 | 4,881 |
| 1.500 | 0.148 | 30,000 | 75,000 | 18,439 | 4,610 | 7,375 | 5,336 |
| 1.750 | 0.035 | 30,000 | 75,000 | 3,125 | 781 | 1,250 | 1,176 |
| 1.750 | 0.049 | 30,000 | 75,000 | 3,864 | 966 | 1,546 | 1,434 |
| 1.750 | 0.065 | 30,000 | 75,000 | 6,019 | 1,505 | 2,407 | 2,146 |
| 1.750 | 0.083 | 30,000 | 75,000 | 7,860 | 1,965 | 3,144 | 2,711 |
| 1.750 | 0.095 | 30,000 | 75,000 | 9,135 | 2,284 | 3,654 | 3,080 |
| 1.750 | 0.109 | 30,000 | 75,000 | 10,672 | 2,668 | 4,213 | 3,504 |
| 1.750 | 0.120 | 30,000 | 75,000 | 11,921 | 2,980 | 4,768 | 3,832 |
| 1.750 | 0.134 | 30,000 | 75,000 | 13,563 | 3,391 | 5,425 | 4,242 |
| 1.750 | 0.148 | 30,000 | 75,000 | 15,268 | 3,817 | 6,107 | 4,645 |
| 1.750 | 0.165 | 30,000 | 75,000 | 17,430 | 4,357 | 6,972 | 5,124 |
| 2.000 | 0.035 | 30,000 | 75,000 | 2,720 | 680 | 1,088 | 1,032 |
| 2.000 | 0.049 | 30,000 | 75,000 | 3,864 | 966 | 1,546 | 1,434 |
| 2.000 | 0.065 | 30,000 | 75,000 | 5,214 | 1,303 | 2,086 | 1,887 |
| 2.000 | 0.083 | 30,000 | 75,000 | 6,788 | 1,697 | 2,715 | 2,387 |
| 2.000 | 0.095 | 30,000 | 75,000 | 7,873 | 1,968 | 3,149 | 2,715 |
| 2.000 | 0.109 | 30,000 | 75,000 | 9,175 | 2,294 | 3,670 | 3,092 |
| 2.000 | 0.120 | 30,000 | 75,000 | 10,227 | 2,557 | 4,091 | 3,384 |
| 2.000 | 0.134 | 30,000 | 75,000 | 11,605 | 2,901 | 4,642 | 3,751 |
| 2.000 | 0.148 | 30,000 | 75,000 | 13,028 | 3,257 | 5,211 | 4,111 |
| 2.000 | 0.165 | 30,000 | 75,000 | 14,820 | 3,705 | 5,928 | 4,542 |
| Stainless Steel Tube Suppliers Types | Out diameter | Wall thickness | Length |
|---|---|---|---|
| Stainless Steel 316L Welded Tube (in Stock + Custom Sizes) | 5.0mm ~ 1219.2mm | 1.0 ~ 15.0 mm | Upto 6 Meters |
| Stainless Steel 316L Seamless Tube (Custom Sizes) | 5.0mm ~ 203.2mm | As per requirement | Upto 6 Meters |
| NB Sizes (in stock) | 1/8” ~ 8” | SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Upto 6 Meters |
| Surface Finish | Internal Surface(ID) | Exterbal Surface(OD) | |||
|---|---|---|---|---|---|
| Roughness Average(RA) | Roughness Average(RA) | ||||
| μ inch | μm | μ inch | μm | ||
| AP | Annealed & Pickled | Not defined | Not defined | 40 or Not defined | 1.0 or Not defined |
| BA | Beight Annealed | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
| MP | Mechanical Polish | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
| EP | Electro Polish | 15,10,7,5 | 0.38,0.25,0.20;0.13 | 32 | 0.8 |
| Electrical Resistivity | 7.4e-005 ohm-cm | 7.4e-005 ohm-cm | at 20ºC |
|---|---|---|---|
| Magnetic Permeability | 1.008 | 1.008 | at R |
| PIPE SIZE |
OD IN INCHES |
A.S.A. Pipe Schedules | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5s | 5 | 10s | 10 | 20 | 30 | 40s & Std. |
40 | 60 | 80s & E.H. |
80 | 100 | 120 | 140 | 160 | DBL E.H. | ||
| 1/8 | .405 | .035 .1383 |
.049 .1863 |
.049 .1863 |
.068 .2447 |
068 .2447 |
0.95 .3145 |
0.95 .3145 |
|||||||||
| 1/4 | .540 | .049 .2570 |
.065 .3297 |
.065 .3297 |
.088 .4248 |
088 .4248 |
.119 .5351 |
.119 .5351 |
|||||||||
| 3/8 | .675 | .049 .3276 |
.065 .4235 |
.065 .4235 |
.091 .5676 |
.091 .5676 |
.126 .7338 |
.126 .7338 |
|||||||||
| 1/2 | .840 | .065 .5383 |
.065 .5383 |
.083 .6710 |
.083 .6710 |
.109 .8510 |
.109 .8510 |
.147 1.088 |
.147 1.088 |
.187 1.304 |
.294 1.714 |
||||||
| 3/4 | 1.050 | .065 .6838 |
.065 .6838 |
.083 .8572 |
.083 .8572 |
.113 1.131 |
.113 1.131 |
.154 1.474 |
.154 1.474 |
.218 1.937 |
.308 2.441 |
||||||
| 1 | 1.315 | .065 .8678 |
.065 .8678 |
.109 1.404 |
.109 1.404 |
.133 1.679 |
.133 1.679 |
.179 2.172 |
.179 2.172 |
.250 2.844 |
.358 3.659 |
||||||
| 1-1/4 | 1.660 | .065 1.107 |
.065 1.107 |
.109 1.806 |
.109 1.806 |
.140 2.273 |
.140 2.273 |
.191 2.997 |
.191 2.997 |
.250 3.765 |
.382 5.214 |
||||||
| 1-1/2 | 1.900 | .065 1.274 |
.065 1.274 |
.109 2.085 |
.109 2.085 |
.145 2.718 |
.145 2.718 |
.200 3.631 |
.200 3.631 |
.281 4.859 |
.400 6.408 |
||||||
| 2 | 2.375 | .065 1.604 |
.065 1.604 |
.109 2.638 |
.109 2.638 |
.154 3.653 |
.154 3.653 |
.218 5.022 |
.218 5.022 |
.343 7.444 |
.436 9.029 |
||||||
| 2-1/2 | 2.875 | .083 2.475 |
.083 2.475 |
.120 3.531 |
.120 3.531 |
.203 5.793 |
.203 5.793 |
.276 7.661 |
.276 7.661 |
.375 10.01 |
.552 13.70 |
||||||
| 3 | 3.500 | .083 3.029 |
.083 3.029 |
.120 4.332 |
.120 4.332 |
.216 7.576 |
.216 7.576 |
.300 10.25 |
.300 10.25 |
.437 14.32 |
.600 18.58 |
||||||
| 3-1/2 | 4.000 | .083 3.472 |
.083 3.472 |
.120 4.973 |
.120 4.973 |
.226 9.109 |
.226 9.109 |
.318 12.51 |
.318 12.51 |
.636 22.85 |
|||||||
| 4 | 4.500 | .083 3.915 |
.083 3.915 |
.120 5.613 |
.120 5.613 |
.237 10.79 |
.237 10.79 |
.281 12.66 |
.337 14.98 |
.337 14.98 |
.437 19.01 |
.531 22.51 |
.674 27.54 |
||||
| 4-1/2 | 5.000 | .247 12.53 |
.355 17.61 |
.710 32.53 |
|||||||||||||
| 5 | 5.563 | .109 6.349 |
.109 6.349 |
.134 7.770 |
.134 7.770 |
.258 14.62 |
.258 14.62 |
.375 20.78 |
.375 20.78 |
.500 27.04 |
.625 32.96 |
.750 38.55 |
|||||
| 6 | 6.625 | .109 7.585 |
.109 7.585 |
.134 9.290 |
.134 9.290 |
.280 18.97 |
.280 18.97 |
.432 28.57 |
.432 28.57 |
.562 36.39 |
.718 45.30 |
.864 53.16 |
|||||
| 7 | 7.625 | .301 23.57 |
.500 38.05 |
.875 63.08 |
|||||||||||||
| Medium Type = Wall thickness in inches Bold Type = Steel weight per foot in pounds |
|||||||||||||||||
| Surface | Absolute Roughness Coefficient - k - |
|
|---|---|---|
| (10-3 m) |
(feet) | |
| Drawn Copper, Lead, Brass, Aluminum (new) and the like | 0.001 - 0.002 | (3.28 - 6.56) 10-6 |
| PVC, PE and other smooth Plastic Pipes | 0.0015 - 0.007 | (0.49 - 2.30) 10-5 |
| Stainless steel, bead blasted | 0.001 - 0.006 | (0.00328 - 0.0197) 10-3 |
| Stainless steel, turned | 0.0004 - 0.006 | (0.00131 - 0.0197) 10-3 |
| Stainless steel, electron-polished | 0.0001 - 0.0008 | (0.000328 - 0.00262) 10-3 |
| Commercial steel or wrought iron | 0.045 - 0.09 | (1.48 - 2.95) 10-4 |
| Stretched steel | 0.015 | 4.95 10-5 |
| Weld steel | 0.045 | 1.48 10-4 |
| Galvanized steel | 0.15 | 4.92 10-4 |
| Rusted steel (corrosion) | 0.15 - 4 | (4.92 - 131) 10-4 |
| New cast iron | 0.25 - 0.8 | (8.2 - 26.2) 10-4 |
| Worn cast iron | 0.8 - 1.5 | (2.62 - 4.92) 10-3 |
| Rusty cast iron | 1.5 - 2.5 | (4.92 - 8.2) 10-3 |
| Sheet or asphalted cast iron | 0.01 - 0.015 | (3.28 - 4.92) 10-5 |
| Smoothed cement | 0.3 | 0.98 10-3 |
| Ordinary concrete | 0.3 - 1 | (0.98 - 3.28) 10-3 |
| Coarse concrete | 0.3 - 5 | (0.98 - 16.4) 10-3 |
| Wood stove | 0.18 - 0.9 | |
| Well planed wood | 0.18 - 0.9 | (5.9 - 29.5) 10-4 |
| Ordinary wood | 5 | 16.4 10-3 |
| Grade | Density (kg/m3) |
|---|---|
| 316L | 8000 |
| Size by Inch (diameter) | Thickness |
Sizes by MM (diameter) |
Thickness |
|---|---|---|---|
inch |
inch |
||
1“ x 1/2" |
0.065" |
10×15 |
0.6～1.5 |
| 1“ x 3/4" |
0.065" |
10×20 |
0.6～1.5 |
| 0.095" | 14×21 |
0.6～1.5 |
|
| 1 1/4" x 3/4" |
0.065" |
15×30 |
0.6～1.5 |
| 1 1/2" x 3/4" |
0.065" |
15×38 |
0.6～1.5 |
| 0.120" | 20×20 |
0.6～2 |
|
1 1/2" x 1" |
0.065" |
20×30 |
0.6～2 |
0.072" |
20×40 |
0.6～2 |
|
0.083" |
20×50 |
0.6～2 |
|
0.120" |
22×35 |
0.6～2 |
|
2“ x 1” |
0.065" |
25×40 |
0.9～2 |
0.083" |
25×65 |
0.9～3.75 |
|
0.120" |
30×20 |
1～2 |
|
0.188" |
30×40 |
1～3.75 |
|
2” x 1 1/4“ |
0.065" |
30×45 |
1～3.75 |
0.083" |
30×50 |
1～3.75 |
|
2“ x 1 1/2” |
0.083" |
30×60 |
1～4 |
0.120" |
40×25 |
1～4.5 |
|
| 2 1/2“ x 1 1/2” |
0.072" |
40×50 |
1～4.5 |
0.083" |
40×60 |
1～4.5 |
|
0.120" |
40×80 |
1～5 |
|
0.148" |
40×100 |
1～5 |
|
0.188" |
50×25 |
2～5 |
|
0.250" |
50×30 |
2～5 |
|
| 3" x 1" | 0.083" |
50×60 |
2～5 |
0.120" |
50×80 |
2～5 |
|
0.188" |
50×100 |
2～5 |
|
| 3“ x 1 1/2” |
0.083" |
60×30 |
2～6 |
0.120" |
60×40 |
2～6 |
|
0.188" |
60×80 |
2～6 |
|
| 0.250" | 70×50 |
2～6 |
|
3“ x 2” |
0.065 |
80×30 |
2～8 |
0.083 |
80×40 |
2～8 |
|
0.125 |
80×60 |
2～8 |
|
0.188 |
80×100 |
2～8 |
|
0.250 |
100×50 |
2～8 |
|
3“ x 2” |
0.083" |
120×60 |
2.5～10 |
0.120" |
120×80 |
2.5～10 |
|
0.188" |
140×60 |
2.5～10 |
|
0.250" |
140×80 |
2.5～10 |
|
| 0.312" | 150×100 |
2.5～12 |
|
4“ x 1 1/2” |
0.120" |
160×80 |
2.5～12 |
0.188" |
180×150 |
2.5～12 |
|
| 4“ x 2” |
0.083" |
200×100 |
4～12 |
0.120" |
200×150 |
4～12 |
|
0.188" |
220×140 |
4～12 |
|
0.250" |
250×150 |
6～12 |
|
0.312" |
250×100 |
6～12 |
|
0.375" |
250×200 |
6～30 |
|
4“ x 2 1/2” |
0.188" |
300×100 |
6～30 |
0.250" |
300×150 |
6～30 |
|
| 4" x 3" | 0.083" |
300×200 |
6～30 |
0.120" |
300×250 |
6～30 |
|
0.188" |
400×250 |
8～30 |
|
0.250" |
400×300 |
8～30 |
|
0.312" |
450×200 |
8～30 |
|
0.375" |
450×250 |
8～30 |
|
| 4 1/2“ x 2 1/2” |
0.188" |
400×300 |
8～30 |
0.250" |
400×350 |
8～30 |
|
| 5" x 2” | 0.120" |
500×200 |
10～30 |
0.188" |
500×250 |
10～30 |
|
0.250" |
500×300 |
10～30 |
|
0.312" |
500×350 |
10～30 |
|
0.375" |
500×400 |
10～30 |
|
| 5" x 2 1/2” |
0.120" |
500×450 |
10～30 |
0.188" |
600×200 |
10～28 |
|
0.250" |
600×400 |
10～28 |
|
| 5" x 3" |
0.188" |
600×500 |
10～28 |
0.250" |
800×400 |
10～28 |
|
0.312" |
800×600 |
10～28 |
|
0.375" |
800×700 |
10～28 |
|
0.500" |
1000×400 |
10～28 |
|
5" x 4" |
0.188" |
1000×500 |
10～28 |
0.250" |
1000×600 |
10～28 |
|
0.312" |
1000×800 |
10～28 |
|
0.375" |
|||
6" x 2" |
0.120" |
||
0.188" |
|||
0.250" |
|||
0.312" |
|||
0.375" |
| Product Description | Outside Diamter, OD (in mm) | Wall Thickness, WT (in mm) |
|---|---|---|
| Stainless Steel Round Pipe/Tube | 6 – 630 | 0.5-30 |
| Square Pipe/Tube | 12.7* 12.7 to 300* 300 | 0.5-30 |
| Stainless Steel Rectangular Pipe/Tube | 10*20 to 100*200 | 0.5-30 |
| Colour Coated Pipe/Tube | 6 to 630 | 0.5-30 |
| Stainless Steel Ornamental Tube | 12.7 to 76.2 | 0.5-2.0 |
| Electropolished Pipes/Tube | 12.7 to 250 | 0.5-30 |
| Stainless Steel Slot Round Pipe/Tube | 12.7 to 76.2 | 0.5-2.0 |
| Triangle Tube | 16 to 85 | 0.5-3.0 |
| Stainless Steel Hexagonal Tube | 13 to 85 | 0.5-2.0 |
| Polished Tube | 12.7 to 100 | 0.5-2.0 |
| Stainless Steel U Shaped Tube | 20 to 200 | 0.5-2.0 |
| Thin-Wall Tube | 22*0.7 to 108*2.0 | 0.5-2.0 |
| Stainless Steel Inner/Outside Polished Tube, Pipes | 12.5 to 203.2 | 1.0 – 5 |
| Capillary Tube | 0.28 to 10 | 0.08 – 1.2 |
| Stainless Steel Seamless Tube | 6 to 430 | 0.8 – 30 |
| Stainless Steel Tube Size and Weight | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wall Thickness in mm | 0.5 | 0.6 | 0.7 | 0.8 | 1 | 1.2 | 1.6 | 2 | 2.6 | 3 | 3.2 | 3.6 |
| O. D. in mm Weight in kg/m | ||||||||||||
| 6 | 0.069 | 0.081 | 0.093 | 0.104 | 0.125 | 0.144 | 0.176 | – | – | – | – | – |
| 10 | 0.119 | 0.141 | 0.163 | 0.184 | 0.225 | 0.264 | 0.336 | – | – | – | – | – |
| 12.7 | 0.153 | 0.182 | 0.21 | 0.238 | 0.293 | 0.345 | 0.444 | – | – | – | – | – |
| 14 | 0.169 | 0.201 | 0.233 | 0.264 | 0.325 | 0.384 | 0.496 | – | – | – | – | – |
| 15.87 | 0.192 | 0.229 | 0.266 | 0.301 | 0.372 | 0.44 | 0.571 | 0.694 | – | – | – | – |
| 19 | 0.231 | 0.276 | 0.32 | 0.364 | 0.45 | 0.534 | 0.696 | 0.85 | 1.066 | 1.2 | 1.264 | – |
| 25 | 0.306 | 0.366 | 0.425 | 0.484 | 0.6 | 0.714 | 0.936 | 1.15 | 1.456 | 1.65 | 1.744 | 1.926 |
| 25.4 | 0.311 | 0.372 | 0.432 | 0.492 | 0.61 | 0.726 | 0.952 | 1.17 | 1.482 | 1.68 | 1.776 | 1.962 |
| 31.8 | – | – | – | – | – | 0.918 | 1.208 | 1.49 | 1.898 | 2.16 | 2.288 | 2.538 |
| 38 | – | – | – | – | – | 1.104 | 1.456 | 1.8 | 2.301 | 2.625 | 2.784 | 3.096 |
| 44.5 | – | – | – | – | – | 1.299 | 1.716 | 2.125 | 2.724 | 3.113 | 3.304 | 3.681 |
| 50.8 | – | – | – | – | – | – | 1.968 | 2.44 | 3.133 | 3.585 | 3.808 | 4.248 |
| 63.5 | – | – | – | – | – | – | 2.476 | 3.075 | 3.959 | 4.538 | 4.824 | 5.391 |
| 76.1 | – | – | – | – | – | – | 2.98 | 3.705 | 4.778 | 5.483 | 5.832 | 6.525 |
| 101.6 | – | – | – | – | – | – | 4 | 4.98 | 6.435 | 7.395 | 7.872 | 8.82 |
| 114.3 | – | – | – | – | – | – | 4.453 | 5.547 | 7.173 | 8.247 | 8.78 | 9.84 |
| 127 | – | – | – | – | – | – | 4.955 | 6.175 | 7.989 | 9.188 | 9.785 | 10.98 |
| 152.4 | – | – | – | – | – | – | 5.96 | 7.429 | 9.62 | 11.07 | 11.792 | 13.231 |
| NB SIZES | SCH 5 | SCH 10 | SCH 40 | SCH 80 | SCH 160 |
|---|---|---|---|---|---|
1/8″ |
√ |
√ |
√ |
√ |
|
1/4″ |
√ |
√ |
√ |
√ |
|
3/8″ |
√ |
√ |
√ |
√ |
|
1/2″ |
√ |
√ |
√ |
√ |
√ |
3/4″ |
√ |
√ |
√ |
√ |
√ |
1″ |
√ |
√ |
√ |
√ |
√ |
1 1/4″ |
√ |
√ |
√ |
√ |
√ |
1 1/2″ |
√ |
√ |
√ |
√ |
√ |
2″ |
√ |
√ |
√ |
√ |
√ |
2 1/2″ |
√ |
√ |
√ |
√ |
√ |
3″ |
√ |
√ |
√ |
√ |
√ |
4″ |
√ |
√ |
√ |
√ |
√ |
5″ |
√ |
√ |
√ |
√ |
|
6″ |
√ |
√ |
√ |
√ |
| NPS | ASTM A312 TP316 OD Tolerance | |||
|---|---|---|---|---|
| + | – | |||
| inch | mm | inch | mm | |
| 1/8~1 1 /2 > 1 1 /2~4 > 4~8 > 8~18 > 18~26 > 26~34 > 34~48 |
1/64(0.015) 1/32(0.031) 1/16(0.062) 3/32(0.093) 1/8(0.125) 5/32(0.156) 3/16(0.187) |
0.4 0.8 1.6 2.4 3.2 4.0 4.8 |
1/32(0.031) 1/32(0.031) 1/32(0.031) 1/32(0.031) 1/32(0.031) 1/32(0.031) 1/32(0.031) |
0.8 0.8 0.8 0.8 0.8 0.8 0.8 |
| NPS | ASTM A312 TP 316L WT Tolerance, % | |
|---|---|---|
| + | – | |
| 1/8-2 1 /2 | 20.0 | 12.5 |
| 3~18, t/D≤ 5% | 22.5 | 12.5 |
| 3~18, t/D> 5% | 15.0 | 12.5 |
| ≥ 20, welded | 17.5 | 12.5 |
| ≥ 20, seamless, t/D≤ 5% | 22.5 | 12.5 |
| ≥ 20, seamless, t/D> 5% | 15.0 | 12.5 |
| GAUGE | THICKNESS RANGE (INCH) | TYPICAL VALUE (INCH) |
|---|---|---|
| 22 | 0.025 - 0.029 | 0.028 |
| 20 | 0.031 - 0.035 | 0.035 |
| 19 | 0.038 - 0.042 | 0.042 |
| 18 | 0.044 - 0.049 | 0.049 |
| 17 | 0.053 - 0.058 | 0.058 |
| 16 | 0.060 - 0.065 | 0.065 |
| 15 | 0.066 - 0.074 | 0.072 |
| 14 | 0.075 - 0.085 | 0.083 |
| 13 | 0.087 - 0.097 | 0.095 |
| 12 | 0.101 - 0.111 | 0.109 |
| 11 | 0.112 - 0.122 | 0.12 |
| 10 | 0.126 - 0.136 | 0.134 |
| 9 | 0.140 - 0.150 | 0.148 |
| 8 | 0.157 - 0.167 | 0.165 |
| 7 | 0.175 - 0.185 | 0.18 |
| HS Code | Description |
|---|---|
| 73049000 | DEFECTIVE STAINLESS STEEL SEAMLESS PIPE/TUBE BRIGHT ANNEALEDA269 316L GRADE |
| 73044100 | THT-3R60-12.7-1.65 FL-60-6000- ASTM ASME A/SA213AW A269, SANDVIK 3R60, TP316L, SEAMLESS STAINLESS STEEL Tube, (360 MTR) |
| 73044100 | THT-3R60-25.40-3.20 FL-25-6000- ASTM ASME A/SA213AW A269, SANDVIK 3R60, TP316L, SEAMLESS STAINLESS STEEL Tube, (150 MTR |
| 73044900 | STAINLESS STEEL SEAMLESS Tube-SPEC:SA 213 TP304/304L SIZE:O.D.19.05MM X W.T.1.65MM X L:27416MM (QTY:15736.80 MTRS)(COLD |
| 73041990 | STAINLESS STEEL SEAMLESS TUBE 12.7MMOD X 1MM LESS THAN 2.5 GRADE SS 316L (PCS 2100) |
| 73041990 | STAINLESS STEEL SEAMLESS TUBE 12.7MMOD X 1MM LESS THAN 2.5 GRADE SS 316L |
| 73044900 | STAINLESS STEEL SEAMLESS Tube-SPEC:SA 213 TP304/304L SIZE:O.D.19.05MM X W.T.1.65MM X L:16187MM (QTY:17595.30 MTRS)(COLD |
| 73044900 | SEAMLESS STAINLESS STEEL PIPES/Tube HOT FINISH TP 316L (ODNOT LESS THAN 42 MM) |
| 73044900 | SEAMLESS STAINLESS STEEL PIPES/Tube HOT FINISH TP 316L (ODNOT LESS THAN 42 MM) |
| 73044900 | SEAMLESS STAINLESS STEEL PIPES/Tube HOT FINISH TP 316L (ODNOT LESS THAN 42 MM) |
| 73044900 | SEAMLESS STAINLESS STEEL HOT FINISH PIPES / Tube TP 316L (OD NOT LESS THAN 42 MM) |
| 73044900 | SEAMLESS STAINLESS STEEL PIPES/Tube HOT FINISH TP 316L (ODNOT LESS THAN 42 MM) |
| 73041190 | SEAMLESS STAINLESS STEEL Tube/PIPE(HOT FINISHED)(OD NOT LESS THAN 42MM) GRADE-TP316L-SIZE-42.2*3.56 LENGTH-10-11.8 |
| 73044900 | SEAMLESS STAINLESS STEEL HOT FINISH PIPES / Tube TP 316L (OD NOT LESS THAN 42 MM) |
| 73044900 | SEAMLESS STAINLESS STEEL PIPES/Tube HOT FINISH TP 316L (ODNOT LESS THAN 42 MM) |
| 73044900 | SEAMLESS STAINLESS STEEL PIPES/Tube HOT FINISH TP 316L (ODNOT LESS THAN 42 MM) |
| 73041190 | SEAMLESS STAINLESS STEEL Tube/PIPE(HOT FINISHED)(OD NOT LESS THAN 42MM) GRADE-TP316L-SIZE-42.2*2.77 LENGTH-10-11.8 |
| 73044900 | SEAMLESS STAINLESS STEEL PIPES/Tube HOT FINISH TP 316L (ODNOT LESS THAN 42 MM) |
| 73044900 | SEAMLESS STAINLESS STEEL PIPES/Tube HOT FINISH TP 316L (ODNOT LESS THAN 42 MM) |
| 73041110 | STAINLESS STEEL SEAMLESS Tube/PIPES COLD FINISH & BRIGHT ANNEALED GRADE 316L, A213/A269 |
| GRADE | TENSILE STRESS (MPA) MIN |
YIELD STR 0.2% PROOF (MPA) MIN |
ELONG (% IN 50MM) MIN |
HARDNESS | |
|---|---|---|---|---|---|
| ROCKWELL B (HR B) MAX | BRINELL (HB) MAX | ||||
| SS 316L Tube | 485 | 170 | 40 | 95 | 217 |
| Material | C | MN | SI | P | S | CR | MO | NI | N | |
|---|---|---|---|---|---|---|---|---|---|---|
| SA213 TP 316L Tube | Min | - | - | - | - | - | 16.0 | 2.00 | 10.0 | - |
| Max | 0.03 | 2.0 | 0.75 | 0.045 | 0.03 | 18.0 | 3.00 | 14.0 | 0.10 |
| Material | UNS NO | OLD BRITISH | EN/ EURONORM | SWEDISH SS |
JAPANESE JIS |
||
|---|---|---|---|---|---|---|---|
| BS | EN | NO | NAME | ||||
| SA213 TP 316L Tube | S31603 | 316S11 | - | 1.4404 | X2CrNiMo17-12-2 | 2348 | SUS 316L |
| UNS S316L03 Electropolished Tubing | ASME SA249 TP 316L Rectangular Tube |
| 316L Stainless Steel Square Tubing | Stainless Steel 1.4404 Polished Tube |
| 316L Stainless Steel Tubing | Stainless Steel 316L Fabricated Tube |
| ASME SA249 TP 316L 12mm Tube | 316L Stainless Steel Seamless Tubing |
| ASTM A249 TP 316L High Pressure Tube | Stainless Steel A249 TP316L Thin Wall Tubing |
| Stainless Steel 1.4404 Electropolished Tube | 316L Stainless Steel Cold Drawn Seamless Tube |
