Din 975 Threaded Rod With Metric Thread Manufacturer in India

Din 975 Threaded Rod With Metric Thread manufacturer in india, check Specification and Price in Mumbai

Table Of Content:

Specification List of DIN 975 Threaded Rod
DIN 975 Rod Dimensions
Din 975 Threaded Rod Price
Packaging Metric Din 975 Threaded Rods
Standard of din 975 threaded rod
Testing done m24 din 975 threaded rod
Din 975 Threaded Rod Coarse/Fine Thread
DIN975 Full Threaded Rod Available Diameter
Weight Chart of Din 975 Threaded Rod
Check Available Material
Applicaion of DIN 975 Threaded Rod
Galvanized Grade 4.8 Threaded Rod Hardness

Length of DIN975/B7 8.8 Grade Thread Rod
see here BN - Standard chart of DIN975 Full Threaded Rod
Threaded Rods Galvanized DIN 975 Property Strength class
8.8 Grade DIN 975 Threaded Rod
Stock list of Grade 4.8/6.8/8.8 Steel Full Thread Thread Rod DIN975
why buy DIN975/B7 8.8 Grade Threaded Rod from Simplex Steel
Din 975 Threaded Rod Surface Finish
DIN 975 Full Thread 4.8 Zinc Plate Threaded Rod Mechanical Properties
Chemical composition of Galvanized Black Oxide Grade 8.8 Thread Rod DIN975

The German Institute for Standardization, or Deutsches Institut für Normung as it is known in English, is the organisation that publishes DIN standards. using DIN standards, such one for Din 975 Threaded Rodis typical in those regions of the world where there is no equivalent ISO standard. Although certain nations in Europe, like Germany, England, and some others, are transitioning to the ISO standards. The size of aDin 975 Threaded Rod With Metric Thread is about 1m long.

The construction of these rods is threaded along their entire length. The resemblance of the Metric Din 975 Threaded Rods is comparable to the threaded shaft of a screw or a bolt fastener. These rods' threaded shafts, on the other hand, are frequently longer than each fastener. Unlike a bolt or screw, theDin 975 Threaded Rod Standard has no head portion, which is another reason why these fasteners are referred to as all thread rods or ATRs.

A threaded rod may also go by the titles continuously threaded rod, redi-rod, or even fully threaded rod. The creation of Metric DIN 975 threaded rods, intended for use in tension joining and/or as a stabilising fastener, is achievable utilising traditional alloys such steel as well as stainless steel grades A2 (alloy 304) and A4 (alloy 316).

before buy from india Compare Din 975 Threaded Rod price with Stainless Steel Threaded Rod price list

Specification List of DIN 975 Threaded Rod

Dimensions	ASME B18.2.1, B18.3
Melt Origin	South America/East Europe/JapanKorea/
Product Origin	Made in India
Threads Configuration	ASME B1.1 2A/3A Inch Unified Threads and B1.13M 6h Metric Coarse Threads
Certification	Dual Certified As per ASTM & ASME Codes
Additional Certifications	PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
Mandatory Requirements	Free from Mercury & Radioactive Contamination
Additional Requirements	NACE MR0103 / MR0175 / ISO 15156 Compliance

Din 975 Threaded Rod Price

Description	Per Unit (INR)	Price in USD	Price in EURO
Din 975 Threaded Rods, Grade 4.8, Zinc Plated, M 6x20001000 Pcs (Fixation Material) Of Ms	57	0.77	0.63
Din 975 Threaded Rods, Grade 4.8, Zinc Plated, M 8x20006000 Pcs (Fixation Material)of Ms	47	0.64	0.52
Din 975 Threaded Rods, Grade 4.8, Zinc Plated, M 10x20005000 Pcs (Fixation Material) Of Ms	45	0.61	0.50
Din 975 Threaded Rods, Grade 4.8, Zinc Plated, M 16x2000200 Pcs (Fixation Material) Of Ms	46	0.62	0.51
Din 975 Threaded Rods, Grade 4.8, Zinc Plated, M 12x20001600 Pcs (Fixation Material)	45	0.61	0.50
10500003-2.0 Threaded Rod 5(Cut Size) 10-24x2 A Steel Grade5(Min) (Parts For Resistance Welder)(For Captive Use)	39	0.53	0.43
10500005-2 Threaded Rod 25inch-20x2.0inch A Steel Grade 5(Min) (Parts For Resistance Welder)(For Captive Use)	55	0.75	0.61

Packaging Metric Din 975 Threaded Rods

Bulk in cartons on wood pallet or according to customer special demand.

Standard of DIN 975 Threaded Rod

Tech.Standards		Material	Grade	Size	Finish
Thread rod	DIN/ASTM	1008	GB Standard 4.8Grade ASTM Standard Grade2	M2-M120 1/2-5"	ZINC,HDG,Black
Hs3404	ASTM193/A193M	GB Standard 40Cr 35CrMo 25CrMoVA 0Cr18Ni9,0Cr17Ni12Mo2 etc ASTM standard Alloy and stainless steel	GB standard Grade8.8,10.9,12.9 A2-70,A4-70 ASTM Standard B5,B7,B7M,B8,B8M,B16 L7,L7M,BC,BD,660A,660B,651A,651B	GBstandard M12-M120 ASTM Standard 1/2-5"	Black,zinc plated HDG,Cadmium Plated, Dacromet,Passivation (PTFE,FEP PFA ETFE)
HG/T20634	ASTM320/A320M
HG/T20613	ASTMA354
JB/T4707	ASTMA453

SH3404	ASTMA194/194M	GB Standard 40Cr,35CrMo,25CrMoVA,0CR18Ni9,45#,0Cr17Ni12Mo2 ASTM Standard Alloy and stainless steel	GB Standard Grade8,10,A2-70,A4-80 ASTM Standard 660A 660B 651A,651B 2H,2HM,4,6.7,8,16O,A,B,C,D,DH	GB or DINstandard M12-M120 ASTM Standard 1/2-5"	Black,zinc plated HDG,Cadmium Plated, Dacromet,Passivation (PTFE,FEP PFA ETFE)
HG/T20613	ASTMA563/563M
HG/T20634
HG/T21573.3

Testing done m24 din 975 threaded rod

Positive Material Identification Test
Hardness Test
Tensile Testing Machine
IGC Test

Din 975 Threaded Rod Coarse/Fine Thread

R001 – 975-4.6 Bare Steel
R002 – 975-4.6 Zinc Plated
R007 – 975-4.6 Bare Steel Left Hand Thread
R003 – 975-8.8 Bare Steel
R103 – 975-8.8 Hot Dipped Galvanized (ISO FIT)
R005 – 975-B7 Bare Steel
R006 – 975-10.9 Bare Steel

Coarse Thread
	4.6						8.8				B7		10.9
	Bare Steel		Zinc		Bare – Left Hand		Bare Steel		H.D.G		Bare Steel
	Pkg.	Order #	Pkg.	Order #	Pkg.	Order #	Pkg.	Order #	Pkg.	Order #	Pkg.	Order #	Pkg.	Order #
M2	1	R001-002-0000
M2.5	1	R001-2.5-0000
M3	1	R001-003-0000
M4	1	R001-004-0000	1	R002-004-0000
M5	1	R001-005-0000	1	R002-005-0000			1	R003-005-0000
M6	1	R001-006-0000	1	R002-006-0000	1	R007-006-0000	1	R003-006-0000					1	R006-006-0000
M7			1	R002-007-0000
M8	1	R001-008-0000	1	R002-008-0000	1	R007-008-0000	1	R003-008-0000	1	R103-008-0000	1	R005-008-0000	1	R006-008-0000
M10	1	R001-010-0000	1	R002-010-0000	1	R007-010-0000	1	R003-010-0000	1	R103-010-0000	1	R005-010-0000	1	R006-010-0000
M12	1	R001-012-0000	1	R002-012-0000	1	R007-012-0000	1	R003-012-0000	1	R103-012-0000	1	R005-012-0000	1	R006-012-0000
M14	1	R001-014-0000	1	R002-014-0000	1	R007-014-0000	1	R003-014-0000	1	R103-014-0000	1	R005-014-0000	1	R006-014-0000
M16	1	R001-016-0000	1	R002-016-0000	1	R007-016-0000	1	R003-016-0000	1	R103-016-0000	1	R005-016-0000	1	R006-016-0000
M18	1	R001-018-0000	1	R002-018-0000	1	R007-018-0000	1	R003-018-0000	1	R103-018-0000	1	R005-018-0000	1	R006-018-0000
M20	1	R001-020-0000	1	R002-020-0000	1	R007-020-0000	1	R003-020-0000	1	R103-020-0000	1	R005-020-0000	1	R006-020-0000
M22	1	R001-022-0000	1	R002-022-0000			1	R003-022-0000	1	R103-022-0000	1	R005-022-0000	1	R006-022-0000
M24	1	R001-024-0000	1	R002-024-0000			1	R003-024-0000	1	R103-024-0000	1	R005-024-0000	1	R006-024-0000
M27	1	R001-027-0000					1	R003-027-0000			1	R005-027-0000		R006-027-0000
M30	1	R001-030-0000					1	R003-030-0000	1	R103-030-0000	1	R005-030-0000	1	R006-030-0000
M33	1	R001-033-0000											1	R006-033-0000
M36	1	R001-036-0000					1	R003-036-0000					1	R006-036-0000
M39	1	R001-039-0000
M42	1	R001-042-0000
M45	1	R001-045-0000
M48	1	R001-048-0000

Fine Thread
d1	4.6		10.9
d1	Pkg.	Order #	Pkg.	Order #

M8 x 1	1	R001-008-0001
M10 x 1	1	R001-010-0001
M10 x 1.25	1	R001-010-1.25	1	R006-010-1.25
M12 x 1.25	1	R001-012-1.25	1	R006-012-1.25
M14 x 1.5	1	R001-014-01.5	1	R006-014-01.5
M16 x 1.5	1	R001-016-01.5	1	R006-016-01.5
M18 x 1.5	1	R001-018-01.5	1	R006-018-01.5
M20 x 1.5	1	R001-020-01.5	1	R006-020-01.5
M22 x 1.5	1	R001-022-01.5	1	R006-022-01.5
M24 x 2	1	R001-024-0002	1	R006-024-0002

DIN975 Full Threaded Rod Available Diameter

D	P	Diameter
D	P	min	max
M4	0.70	3.89	3.98
M5	0.80	4.84	4.97
M6	1.00	5.80	5.96
M8	1.25	7.77	7.96
M10	1.50	9.74	9.96
M12	1.75	11.71	11.95
M14	2.00	13.70	13.94
M16	2.00	15.70	15.94
M18	2.50	17.64	17.93
M20	2.50	19.64	19.93
M22	2.50	21.64	21.93
M24	3.00	23.60	23.92
M27	3.00	26.60	26.92
M30	3.50	29.54	29.92

Weight Chart of Din 975 Threaded Rod

Size	Weight
M2	18.7
M2.5	30.0
M3	44.0
M3.5	60.0
M4	78.0
M5	124
M6	177
M8	319
M10	500
M12	725
M14	970
M16	1330
M18	1650
M20	2080
M22	2540
M24	3000
M27	3850
M30	4750
M33	5900
M36	6900
M39	8200
M42	9400
M45	11000
M48	12400

Check Available Material

DIN 975 Fully Threaded Rod, Steel
DIN 975 Fully Threaded Rod, Grade B7
DIN 975 Fully Threaded Rod, Class 4.6
DIN 975 Fully Threaded Rod, Class 4.8
DIN 975 Fully Threaded Rod, Class 8.8
DIN 975 Fully Threaded Rod, Class 10.9
DIN 975 Fully Threaded Rod, Class 12.9
DIN 975 Fully Threaded Rod, 300 Stainless (A1,A2, 18-8,304,310 etc.)
DIN 975 Fully Threaded Rod, 316, 317, A4 Stainless
DIN 975 Fully Threaded Rod, 400 Stainless (405, 410,416,420,430 etc.)
DIN 975 Fully Threaded Rod, Superalloy (Inconel, Hastelloy, Alloy 20)
DIN 975 Fully Threaded Rod, Aluminum
DIN 975 Fully Threaded Rod, Brass
DIN 975 Fully Threaded Rod, Nylon

Galvanized Grade 4.8 Threaded Rod Hardness

Hardness		PROPERTY CLASS
		4.8	5.6	5.8	6.8	8.8		9.8	10.9	12.9
		4.8	5.6	5.8	6.8	Up to M 16	Over M 16	9.8	10.9	12.9
Vickers Hardness	min.	130	155	160	190	250	255	290	320	385
Vickers Hardness	max	250				320	336	360	380	435
Brinell Hardness	min.	124	147	152	181	319	242	266	295	353
Brinell Hardness	max.	238				385	319	342	363	412
Rockwell Hardness	min. HR	71	79	82	89	-
	HRC	-	-	-	-	20	23	28	32	39
	HR	95			99	-
	max. HRC	-	-	-	-	32	34	37	39	44
Yield Stress ReL. N/mm²	nom.	320	300	400	480	-
Yield Stress ReL. N/mm²	min.	340	300	420	480	-
Stress at permanent set limit N/mm²	nom.	-				640		720	900	1080
Stress at permanent set limit N/mm²	min.	-				640	660	720	940	1100

Length of DIN975/B7 8.8 Grade Thread Rod

Diameter	Length
M3	1m
M4	1m
M5	1m
M6	1m
M6	3m
M8	1m
M8	3m
M10	1m
M10	2m
M10	3m
M12	1m
M12	2m
M12	3m
M14	1m
M16	1m
M16	2m
M16	3m
M18	1m
M20	1m
M20	2m
M20	3m
M22	1m
M24	1m

see here BN - Standard chart of DIN975 Full Threaded Rod

BN - Standard	Short Description	Material	Quality	Surface
BN 413 - DIN 975	Threaded rod metric thread 1 meter	Steel	4.6 / 4.8	plain
BN 419 - DIN 975	Threaded rod metric thread 1 meter	Steel	4.6 / 4.8	zinc plated blue
BN 111 - DIN 975	Threaded rod metric thread 2 meter	Steel	4.6 / 4.8	zinc plated blue
BN 1203 - DIN 975	Threaded rod metric thread 3 meter	Steel	4.6 / 4.8	plain
BN 414 - DIN 975	Threaded rod with metric left-hand thread	Steel	4.6	plain
BN 415 - DIN 975	Threaded rod with metric fine thread	Steel	4.6	plain
BN 416 - UNC	Threaded rod UNC	Steel	4.6	plain
BN 418 - DIN 975	Threaded rod metric thread	Steel	8.8	plain
BN 5269 - DIN 975	Threaded rod metric thread	Steel	8.8	zinc plated blue
BN 420	Spindles with trapezoidal thread thread according DIN 103 - 7e	Steel	4.6	plain
BN 423	Hex nuts ~1,5d with trapezoidal thread DIN 103 - 7H	Steel	5	plain
BN 421	Round nuts ~1,5d with trapezoidal thread DIN 103 - 7H	Steel	5	plain
BN 662 - DIN 975	Threaded rod metric thread 1 m	Stainless steel	A2
BN 663 - DIN 975	Threaded rod metric thread 1 m	Stainless steel	A4
BN 4877 - DIN 975	Threaded rod metric thread 2 m	Stainless steel	A2
BN 1072 - ~DIN 975	Threaded rod metric thread	Polyamide	PA 6.6	natural
BN 552 - ~DIN 975	Threaded rod metric thread	Brass		plain

Threaded Rods Galvanized DIN 975 Property Strength class

Steel group	Property Strength class	Made From	Characteristics
Austenitic	50	A1. A2	Soft; cold worked. turned and soft pressed fasteners
70	A2. A4	Cold worked. normal strength formed fasteners
80	A2. A4	Extreme cold worked. high strength. special applications

Steel group

Property Strength class

Made From

Characteristics

Austenitic

A1. A2

Soft; cold worked. turned and soft pressed fasteners

A2. A4

Cold worked. normal strength formed fasteners

A2. A4

Extreme cold worked. high strength. special applications

8.8 Grade DIN 975 Threaded Rod Size table

Length	Material	Thread	Thread Type	PCs Weight	Size (Fast)
100 mm	Stainless Steel A2 (18-8)	M4-0.70	Coarse	0.07772	M4-0.70x100 MM
100 mm		M5-0.80		0.12375	M5-0.80x100 MM
1.00 mm		M5-0.80		N/A	M5-0.80x1MM
100 mm		M6-1.00		0.17702	M6-1.00x100 MM
1.00 mm		M6-1.00		N/A	M6-1.00x1MM
100 mm		M8-1.25		0.31902	M8-1.25x100 MM
1.00 mm		M8-1.25		N/A	M8-1.25x1MM
100 mm		M10-1.50		0.50002	M10-1.50x100 MM
1.00 mm		M10-1.50		N/A	M10-1.50x1MM
100 mm		M12-1.75		0.72502	M12-1.75x100 MM
1.00 mm		M12-1.75		N/A	M12-1.75x1MM
100 mm		M16-2.00		1.33002	M16-2.00x100 MM
1.00 mm		M16-2.00		N/A	M16-2.00x1MM
100 mm		M20-2.50		2.08002	M20-2.50x100 MM
1.00 mm		M20-2.50		N/A	M20-2.50x1MM
100 mm		M22-2.50		2.54002	M22-2.50x100 MM
100 mm		M24-3.00		3.00002	M24-3.00x100 MM
1.00 mm		M24-3.00		N/A	M24-3.00x1MM

Stock list of Grade 4.8/6.8/8.8 Steel Full Thread Thread Rod DIN975

METER THREADED ROD DIN 975 A2-70 STAINLESS	Type	Diameter (mm)	Pitch	Length (mm)	Material	Finish	Package Quantity
M5-0.8 X 1	DIN 975	M5	Coarse	1	A2-70 Stainless	Plain	30
M6-1.0 X 1		M6		1			30
M8-1.25 X 1		M8		1			20
M10-1.5 X 1		M10		1			20
M12-1.75 X 1		M12		1			12
M16-2.0 X 1		M16		1			8
M20-2.5 X 1		M20		1			6
M24-3.0 X 1		M24		1			4

why buy DIN975/B7 8.8 Grade Threaded Rod from Simplex Steel

Prompt shipment with professional documents
Many years of export experience;
Specifications list is available upon your request
High quality and competitive price.
Good after sales service. Any small problem happening will be solved at the most prompt time;
Custom packing, with photo before shipment
Welcome to send enquiry, we will reply soon.

Din 975 Threaded Rod Surface Finish

Oxidized
Passivation
Electro Polished
Zinc Plating
Hot Dipped Galvanizing
Chrome Plating
Mirror Buffed
Epoxy Coating
Teflon Coating

DIN 975 Full Thread 4.8 Zinc Plate Threaded Rod Mechanical Properties

Steel group	Steel grade	Strength class	Screws. Nuts and Bolts
Steel group	Steel grade	Strength class	Tensile strength N/mm2	Tensile strength PSI	Dia range	Nut Load N/mm2
Austenitic	A2 and A4	50	500	70.000	<=M39	500
		70	700	100.000	<=M20	700
		80	800	118.000	<=M20	800

Chemical composition of Galvanized Black Oxide Grade 8.8 Thread Rod DIN975

Grade	USA Grade	Material designation	Material no.	C %	Si ≤ %	Mn ≤ %	Cr %	Mo %	Ni %
A 2	304	X 5Cr Ni 1810	1.4301	≤ 0.07	1.0	2.0	17.5 to 19.5	-	8.0 to 10.5
X 2 Cr Ni 1811	1.4306	≤ 0.03	1.0	2.0	18.0 to 20.0	-	10 to 12.0
X 8 Cr Ni 19/10	1.4303	≤ 0.07	1.0	2.0	17.0 to 19.0	-	11.0 to 13.0
A 4	316	X 5 Cr Ni Mo 1712	1.4401	≤ 0.07	1.0	2.0	16.5 to 18.5	2.0 to 2.5	10.0 to 13.0
X 2 Cr Ni Mo 1712	1.4404	≤ 0.03	1.0	2.0	16.5 to 18.5	2.0 to 2.5	10 to 13

Grade

USA Grade

Material designation

Material no.

C
%

Si
≤ %

Mn
≤ %

Cr
%

Mo
%

Ni
%

A 2

304

X 5Cr Ni 1810

1.4301

≤
0.07

1.0

2.0

17.5
to 19.5

8.0
to 10.5

X 2 Cr Ni 1811

1.4306

≤
0.03

1.0

2.0

18.0
to 20.0

10
to 12.0

X 8 Cr Ni 19/10

1.4303

≤
0.07

1.0

2.0

17.0
to 19.0

11.0
to 13.0

A 4

316

X 5 Cr Ni Mo 1712

1.4401

≤
0.07

1.0

2.0

16.5
to 18.5

2.0
to 2.5

10.0
to 13.0

X 2 Cr Ni Mo 1712

1.4404

≤
0.03

1.0

2.0

16.5
to 18.5

2.0
to 2.5

10
to 13

DIN 975 Rod Dimensions

Thread size d			Lenght	Mass (7,85 kg/dm3), in kg per 1000 units
M2	-	-	1000±10	18,7
M2,5	-	-	1000±10	30
M3	-	-	1000±10	44
(M3,5)	-	-	1000±10	60
M4	-	-	1000±10	78
M5	-	-	1000±10	124
M6	-	-	1000±10	177
M8	M8x1	-	1000±10	319
M10	M10x1,25	M10x1	1000±10	500
M12	M12x1,25	M12x1,25	1000±10	725
(M14)	(M14x1,5)	-	1000±10	970
M16	M16x1,5	-	1000±10	1330
(M18)	(M18x1,5)	-	1000±10	1650
M20	M20x1,5	-	1000±10	2080
(M22)	(M22x1,5)	-	1000±10	2540
M24	M24x2	-	1000±10	3000
(M27)	(M27x2)	-	1000±10	3850
M30	M30x2	-	1000±10	4750
(M33)	(M33x2)	-	1000±10	5900
M36	M36x3	-	1000±10	3900
(M39)	(M39x3)	-	1000±10	8200
M42	M42x3	-	1000±10	9400
(M45)	(M45x3)	-	1000±10	11000
M48	M48x3	-	1000±10	12400
(M52)	(M52x3)	-	1000±10	14700

Application of DIN 975 Threaded Rod

Paper & Pulp Industry
Power Generation
Pharmaceuticals
Aircraft Exhaust Manifolds
Food Processing Industry
Water Supply Systems
Chemical Industry
Petrochemicals

Mail

Din 975 Threaded Rod

Din 975 Threaded Rod With Metric Thread manufacturer in india, check Specification and Price in Mumbai