Nickel Alloy 600 Seamless Tube supplier

 

inconel 600 tube info

 

Wide size range in ASTM B167 UNS N06600 redrawn Tube and Inconel 600 annealed Tubes

The Inconel 600 tube, which belongs to the nickel alloy category and is governed by ASTM B167, may be delivered in any of the following conditions: cold worked annealed, hot worked annealed, or hot-finished.

The Inconel 600 seamless tubing is best suited for uses in the paper industry, heat exchangers, chemical and food processing equipment, and general corrosion resistance and heat resistance applications. Inconel 600 seamless tube is one such alloy that can display exceptional behaviour in a chemical processing facility. In actuality, the chemistry's delicate balance determines how resistant to corrosion an alloy is.

Even while both chromium and nickel individually have good corrosion resistance qualities, their special chemical composition in the ASTM B167 UNS N06600 tube makes it suitable for usage in both oxidative settings and those where reductive reactions are prevalent. The Inconel 600 tubing is used in applications where resistance to oxidation is essential, not to mention the heat processing sector.

Furthermore, furnace atmospheres are common in these types of enterprises. Alloy 600 tubing can thrive in such a setting without developing creep susceptibility. Due to its resistance to nitrogen at high temperatures, the Alloy 600 tube is also used in nitriding applications.

before buy from india Compare Inconel 600 tube price with inconel 625 tube price list

 

Always Remember

Don't use welded tubes Use Inconel 600 seamless Tubing for Boilers, Heat Exchangers, and Gas Lines even though it is the less expensive option.

 

Price of Inconel 600 Tubing
Description Per Unit (INR) Price in USD
Nickel Alloy Seamless Tube Inconel 600 (Ni-74.30%, Cr-15.69%) 1,403 18.83
(Nickel Alloy Seamless Tubes) Inconel Alloy 600 Seamless Cold Drawn Tubes.bright Annealed.asme Sb167 Uns N06600 10,982 147.36

 

Sizes of Inconel 600 tubes

Alloy 600 tubing

Size: 6 mm OD x 0.7 mm to 50.8 mm OD x 3 mm thk.

 

inconel 600 tubing grade standard and specification
ASTM / ASME Standard ASTM B163/ ASME SB163, ASTM B516 / ASME SB 516
Available Sizes
6 mm OD x 0.7 mm to 50.8 mm OD x 3 mm thk.
Tube Standard ASTM, ASME and API
Available Tube Schedule SCH80, SCH20, SCH60, SCH80, SCH30, SCH140, SCH160, STD, SCH120, XS, XXS, SCH40,
Various Type LSAW /Seamless/ Fabricated /ERW/Welded Tubes
Basic Form Hydraulic, Square, Rectangular, Round etc
Length of Tube Cut Length, Double Random, Single Random etc
Types of Tube End Threaded, Plain End, Beveled End,
Most Common Types Of Alloy 600 Tubing
Astm B167 Uns N06600 Tube
Astm B167 Uns N06600 Tube
Inconel 600 Tube
Inconel 600 Tube
Nickel Alloy 600 Welded Tube
Nickel Alloy 600 Welded Tube
Alloy 600 Annealed Tubes
Alloy 600 Annealed Tubes
Inconel 600 Square Tube
Inconel 600 Square Tube
Inconel 600 Rectangutar Tube
Inconel 600 Rectangutar Tube
Alloy 600 Coiled Tub
Alloy 600 Coiled Tube
Alloy 600 Exhaust Tubing
Alloy 600 Exhaust Tubing

 

Mechanical Characteristics of alloy 600 tubing
Grade Elongation (% in 50mm) min Strength of Yield 0.2% Proof (MPa) minimum Strength of Tensile (MPa) minimum Pipe Hardness
Rockwell B (HR B) maximum Brinell (HB) maximum
600 40 Psi – 45,000 , MPa – 310 Psi – 95,000 , MPa -655

 

Chemical Composition Chart of Alloy 600 seamless tube
Grade C Mn Si Fe S Cr Cu Ni
600 min. 6.0 14.0 72.0
max. 0.15 1.0 0.5 10.0 0.015 17.0 0.5
nickel alloy 600 welded tube Equivalent material grade
Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
600 N06600 NA 13 NiCr15Fe 2.4816 NC15FE11M МНЖМц 28-2,5-1,5 NCF 600

 

What is alloy 600 CDS tubing and why it is used in boilers?
A nickel-chromium alloy with a wide operating temperature range is alloy 600. It could function in cryogenic settings and at temperatures of up to 2000 °F. Cold Drawn Seamless is known as CDS. Therefore, the seamless and cold drawn alloy 600 CDS pipes are made. In order to function under varying temperatures, they are dimensionally correct and have all of the material's mechanical properties. They are employed in high-temperature applications such as boilers, heat exchangers, power plants, and super heater elements for this reason.

 

Alloy 600 Seamless Tube Hardness
Tubing Material General Application Recommended Temperature Range
Inconel Alloy 600 Tubing Recommended for High Temperature Applications with Generally Corrosive Media - -205°F to 1200°F (-130°C to 650°C)

Material Type ASTM Tubing Specifications Condition Max. Recommended Hardness
Inconel Alloy 600 Tube
Inconel 600 Tubing
600 ASTM B-167 Fully Annealed 90 Rb

 

Tuberia Inconel 600 Length And Out Diameter (Od)
Types of Inconel 600 Tube Out diameter (OD) Wall thickness Length
NB Sizes (in stock) 1/8” ~ 8” SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 Upto 6 Meters
Inconel 600 Seamless Tube (Custom Sizes) 5.0mm ~ 203.2mm As per requirement Upto 6 Meters
Inconel 600 Welded Tube (in Stock + Custom Sizes) 5.0mm ~ 1219.2mm 1.0 ~ 15.0 mm Upto 6 Meters

 

Stock List of Tubo Inconel 600
Alloy Product form Dimension
INCONEL 600 (75 Ni/16 Cr) Tube; cold drawn, seamless, annealed 1.5 x 0.25 mm
Tube; cold drawn, seamless, annealed 2.0 x 0.5 mm
Tube; seamless 3.0 x 0.4 mm
Tube; cold drawn, annealed, seamless 3.0 x 0.5 mm
Tube; cold drawn, annealed, seamless 4.0 x 0.25 mm
Tube; cold drawn, seamless, annealed 4.0 x 0.5 mm
Tube; seamless, annealed 4.0 x 1.0 mm
Tube; seamless, cold drawn 4.5 x 0.5 mm
Tube; cold drawn, seamless, annealed 5.0 x 0.5 mm
Tube; annealed, seamless 5.0 x 1.0 mm
Tube; seamless, hard drawn 5.0 x 1.0 mm
Tube; seamless, annealed 6.0 x 0.5 mm
Tube; on coil, seamless, annealed 6.0 x 1.0 mm
Tube; cold drawn, seamless, annealed 6.0 x 1.0 mm
Tube; hard drawn, seamless 6.0 x 1.5 mm
Tube; seamless, annealed 6.35 x 1.63 mm (¼" x 0.064")
Tube; seamless, seamless, annealed 8.0 x 1.0 mm
Tube; cold drawn, annealed, seamless 10.0 x 1.0 mm
Tube; seamless 10.0 x 2.0 mm
Tube; cold drawn, annealed, pickled 12.7 x 1.7 mm (½" x 0.065")
Tube; seamless, annealed 13.72 x 1.65 mm (¼"nb Sch10s)
Tube; seamless, cold drawn, pickled, annealed 14.0 x 3.0 mm
Tube; cold drawn, annealed, pickled 15.0 x 1.5 mm
Tube; cold drawn, annealed 15.8 x 1.7 mm (5/8" x 0.065")
Tube; cold drawn, annealed, pickled 18.0 x 2.0 mm
Tube; cold drawn, pickled, annealed 21.34 x 1.65 mm (½"nb Sch5)
Tube; cold drawn, pickled, annealed 21.34 x 2.11 mm (½"nb Sch10s)
Tube; cold drawn, annealed, pickled 21.34 x 2.77 mm (½"nb sch40s)
Tube; cold drawn, annealed, pickled, seamless 25.4 x 1.65 mm (1" x 0.065")
Tube; cold drawn, seamless, annealed, pickled 26.67 x 2.11 mm (¾"nb Sch10s)
Tube; cold drawn, annealed, pickled 26.67 x 2.87 mm (¾"nb sch40s)
Tube; cold drawn, pickled, annealed 26.67 x 3.91 mm (¾"nb Sch80s)
Tube; cold drawn, annealed, pickled 30.0 x 2.5 mm
Tube; cold drawn, seamless, pickled, annealed 33.4 x 2.77 mm (1"nb Sch10s)
Tube; cold drawn, seamless, annealed, pickled 33.4 x 3.38 mm (1"nb Sch40s)
Tube; cold drawn, pickled, annealed 33.4 x 4.55 mm (1"nb Sch80s)
Tube; cold drawn, seamless, pickled, annealed 42.16 x 1.65 mm (1¼"nb sch5s)
Tube; cold drawn, seamless, annealed, pickled 42.16 x 3.56 mm (1¼"nb Sch40s)
Tube; cold finished, seamless, annealed 48.26 x 2.77 mm (1½"nb Sch10s)
Tube; cold finished, seamless, annealed 48.26 x 3.68 mm (1½"nb Sch40s)
Tube; seamless, cold drawn, annealed, pickled 53.5 x 3.0 mm
Tube; cold drawn, pickled, annealed 60.33 x 2.77 mm (2"nb sch10s)
Tube; cold drawn, pickled, annealed 60.33 x 3.91 mm (2"nb sch40s)
Tube; seamless, cold drawn, pickled, annealed 66.0 x 4.0 mm
Tube; seamless, cold drawn, pickled, annealed 76.2 x 3.3 mm
Tube; seamless, cold drawn, pickled, annealed 88.9 x 3.05 mm (3"nb sch10s)
Tube; seamless, cold drawn, pickled, annealed 88.9 x 5.49 mm (3"nb sch40s)
Tube; cold drawn, pickled, annealed 114.3 x 3.05 mm (4"nb sch10s)
Tube; cold drawn, pickled, annealed 114.3 x 6.02 mm (4"nb sch40s)
Tube; extruded, pickled, annealed 141.3 x 6.55 mm (5"nb sch40s)
Tube; extruded, pickled, annealed 153.0 x 6.5 mm
Tube; seamless, extruded, pickled, annealed 168.28 x 7.11 mm (6"nb sch40s)

 

Alloy 600 Tubing Pressure Rating

Outside Diameter And Wall Thickness (Mm): 1.59 X 0.36

Grade
Maximum internal pressure, ksi
  100°F 200°F 300°F 400°F 500°F 600°F 700°F Comments
N06600 :1 8.02 8.02 8.02 8.02 8.02 8.02 8.02 B167 OD>5" and hotworked
N06600 :2 9.6 9.6 9.6 9.6 9.6 9.6 9.6 B167 OD<=5" and hotworked + OD>5" and coldworked
N06600 :3 11.19 11.19 11.19 11.19 11.19 11.19 11.19 B167 OD<=5" and coldworked

Selected wall tolerance: ±10%
Outside Diameter And Wall Thickness (Mm): 6 X 1

Grade
Maximum internal pressure, ksi
  100°F 200°F 300°F 400°F 500°F 600°F 700°F Comments
N06600 :1 392 392 392 392 392 392 392 B167 OD>5" and hotworked
N06600 :2 470 470 470 470 470 470 470 B167 OD<=5" and hotworked + OD>5" and coldworked
N06600 :3 547 547 547 547 547 547 547 B167 OD<=5" and coldworked

Selected wall tolerance: ±10%
Outside Diameter And Wall Thickness (Mm): 8 X 1

Grade
Maximum internal pressure, ksi
  100°F 200°F 300°F 400°F 500°F 600°F 700°F Comments
N06600 :1 284 284 284 284 284 284 284 B167 OD>5" and hotworked
N06600 :2 340 340 340 340 340 340 340 B167 OD<=5" and hotworked + OD>5" and coldworked
N06600 :3 397 397 397 397 397 397 397 B167 OD<=5" and coldworked


ASTM B167 Uns N06600 Tube For Sale
  • ASTM B516 600 Inconel Welded Tubes
  • Alloy 600 Heat Exchager Tube
  • 600 Alloy Decorative Tube
  • Alloy WERKSTOFF NR. 2.4816 Welded Tubes
  • 600 Alloy Instrumentation Tube
  • Inconel 600 Decorative Tube
  • 600 Alloy Welded Tube
  • ASME SB516 600 Inconel Decorative Tubes
  • Alloy 600 Decorative Tube
  • GOST МНЖМц 28-2,5-1,5 Instrumentation Tubes
  • Inconel 600 Instrumentation Tube
  • UNS N06600 Instrumentation Tubes
  • Inconel UNS N06600 Welded Tube
  • Inconel Alloy 600 Welded Tubes
  • GOST МНЖМц 28-2,5-1,5 Heat Exchager Tubes
  • Alloy 600 Instrumentation Tube
  • 600 Inconel Instrumentation Tubes
  • UNS N06600 Heat Exchager Tubes
  • Alloy 600 Welded Tubes
  • UNS N06600 Decorative Tubes
  • GOST МНЖМц 28-2,5-1,5 Decorative Tubes
  • 600 Inconel Decorative Tubes
  • Inconel 600 Heat Exchager Tube
  • ASME SB516 600 Inconel Instrumentation Tubes
  • Inconel 600 Polish Tube
  • Alloy 600 Polish Tube
  • Alloy 600 Round Tube
  • 600 Inconel Alloy Round Tubes
  • GOST МНЖМц 28-2,5-1,5 Seamless Tubes
  • UNS N06600 Polish Tubes
  • ASME SB163 600 Inconel Seamless Tube
  • UNS N06600 Seamless Tube
  • ASME SB516 600 Inconel Heat Exchager Tubes
  • 600 Alloy Round Tube
  • 600 Inconel Heat Exchager Tubes
  • WERKSTOFF NR. 2.4816 Seamless Tubes
  • ASME SB516 600 Inconel Polish Tubes
  • 600 Alloy Heat Exchager Tube
  • GOST МНЖМц 28-2,5-1,5 Polish Tubes
  • 600 Alloy Seamless Tube
  • 600 Alloy Polish Tube
  • Inconel Alloy 600 Seamless Tubes
  • Alloy 600 Seamless Tubes
  • 600 Inconel Polish Tubes
  • ASME SB516 600 Inconel Round Tubes
  • GOST МНЖМц 28-2,5-1,5 Round Tubes
  • UNS N06600 Round Tubes
  • Inconel 600 Round Tube

 

Alloy 600 Tube Standard
UNS: N06600
Specifications: ASTM B167, ASTM B829, ASTM B517, ASTM B775, ASTM B163, ASTM B516, ASTM B751, AMS 5580
international Specifications: BS 3072-3076 (NA14) DIN 17742, DIN 17750, DIN 17754 WERKSTOFF Nr 2.4816 TÜV 305 AFNOR-NC 15 Fe

 

Inconel 600 Annealed Tubes Surface Finish
Surface Finish Internal Surface(ID) Exterbal Surface(OD)
Roughness Average(RA) Roughness Average(RA)
μ inch μm μ inch μm
EP Electro Polish 15,10,7,5 0.38,0.25,0.20;0.13 32 0.8
AP Annealed & Pickled Not defined Not defined 40 or Not defined 1.0 or Not defined
MP Mechanical Polish 40,32,25,20 1.0,0.8,0.6,0.5 32 0.8
BA Beight Annealed 40,32,25,20 1.0,0.8,0.6,0.5 32 0.8

 

Nickel Alloy 600 Welded Tube Product Forms Available
  • Inconel 600 Straight Tubing
  • Alloy 600 Seamless Tubes

 

Typical Manufacturing Specifications
  • ASTM B163
  • ASTM B167
  • AMS 5580
  • BS 3074
  • Also individual customer specifications

 

UNS N06600 Redrawn Tube Origin And Mills
  • Japanese Origin
  • European Origin
  • Korean Origin
  • American Origin
  • Russian Origin
  • Ukraine Origin
  • Japanese Mills
  • European Mills
  • American Mills
  • Korean Mills
  • Russian Mills
  • Ukraine Mills

 

Application of Inconel 600 Square Tube
  • Gas turbine components including jet engines
  • Chemical processing equipment
  • Electronic parts
  • Nuclear reactor vessels and heat exchanger tubing
  • Heat treat furnace components and fixtures

 

Alloy 600 Coiled Tube Benefits
  • Good oxidation resistance at high temperatures
  • Corrosion resistance to both organic and inorganic compounds
  • Works well with most alkaline solutions and sulfur compounds
  • Resistance to chloride-ion stress corrosion cracking
  • Lower rate of attack from chlorine or hydrogen chloride

 

Astm B167 Uns N06600 Tube Melting Point
Physical Properties Metric English
Melting Point 1354 - 1413 °C 2470 - 2580 °F

 

Nickel Alloy 600 Tubes Packaging
  • tubes up to 3” OD will be supplied in bundles.
  • Over 3” OD will be supplied loose.
  • In order to prevent rust during sea shipment, bundles of Inconel 600 Seamless tube may be wrapped with polypropylene sheets, and secured with flat steel bands.
  • Inconel 600 Seamless tube may be furnished bare or coated and with capped ends.

 

Inconel Alloy 600 Heat Resisting Alloy Tube Technical
NI027100 Inconel® alloy 600 - Heat Resisting Alloy Tube,
Outside Diameter:1.0mm, Wall Thickness:0.3mm, Inside Diameter:0.4mm, Temper:As Drawn
NI027150 Inconel® alloy 600 - Heat Resisting Alloy Tube,
Outside Diameter:1.5mm, Wall Thickness:0.25mm, Inside Diameter:1mm
NI027200 Inconel® alloy 600 - Heat Resisting Alloy Tube,
Outside Diameter:1.96mm, Wall Thickness:0.37mm, Inside Diameter:1.22mm
NI027221 Inconel® alloy 600 - Heat Resisting Alloy Tube,
Outside Diameter:2.1mm, Wall Thickness:0.2mm, Inside Diameter:1.7mm
NI027225 Inconel® alloy 600 - Heat Resisting Alloy Tube,
Outside Diameter:2.5mm, Wall Thickness:0.25mm, Inside Diameter:2.0mm
NI027230 Inconel® alloy 600 - Heat Resisting Alloy Tube,
Outside Diameter:3.02mm, Wall Thickness:0.26mm, Inside Diameter:2.5mm
NI027231 Inconel® alloy 600 - Heat Resisting Alloy Tube,
Outside Diameter:3.0mm, Wall Thickness:0.5mm, Inside Diameter:2.0mm, Temper:Annealed
NI027350 Inconel® alloy 600 - Heat Resisting Alloy Tube,
Outside Diameter:6.15mm, Wall Thickness:0.5mm, Inside Diameter:5.15mm, Temper:Annealed
NI027351 Inconel® alloy 600 - Heat Resisting Alloy Tube,
Outside Diameter:6.0mm, Wall Thickness:1mm, Inside Diameter:4.0mm, Temper:Annealed
NI027410 Inconel® alloy 600 - Heat Resisting Alloy Tube,
Outside Diameter:7.8mm, Wall Thickness:0.65mm, Inside Diameter:6.5mm, Temper:Annealed
NI027420 Inconel® alloy 600 - Heat Resisting Alloy Tube,
Outside Diameter:8.0mm, Wall Thickness:1.0mm, Inside Diameter:6mm, Temper:Annealed
NI027450 Inconel® alloy 600 - Heat Resisting Alloy Tube,
Outside Diameter:9.5mm, Wall Thickness:1.7mm, Inside Diameter:6.1mm, Temper:Annealed
NI027500 Inconel® alloy 600 - Heat Resisting Alloy Tube,
Outside Diameter:12.7mm, Wall Thickness:1.63mm, Inside Diameter:9.44mm, Temper:Annealed

 

Alloy 600 Tubing Properties
Alloy Temper Tensile Strength KSI Yield Strength KSI Minimum Elongation in 2" (%) Rockwell Hardness*
600 Annealed
Half Hard
Full Hard
110 max.
110-130
130 min.
35-55
55-95
95 min.
30
13
4
B 90 max.
B 93 - C 20
C 20 min.

 

Inconel 600 Exhaust Tubing Machinability Ratings
GRADE
APPROXIMATE SURFACE
FEET PER MINUTE
RELATIVE SPEED
BASED ON C-1212

600

50

22