Concrete Anchor Bolt Utilized in Construction Industry
An anchor bolt acts as an anchor when connecting constructions together as its name would imply. Because they are so powerful, anchor bolt manufacturers in India advise utilising concrete with these bolts to link both structural and non-structural components. These stainless steel epoxy anchor bolts are inserted during installation into the pole's foundation and further into the cement.
The pole, or in this case, the structure, will remain solid and safe because of the special design of the aforementioned stainless steel m12 Anchor Bolt. In the creation of Stainless Steel High Performance Anchor Bolts, a variety of alloy grades may be used depending on the type of application and the environment in which the applications will be used. These fasteners often have a long length. However, it is advised that SS Concrete Anchor Bolts be at least 2 to 3 inches outside of the concrete and 7 inches inside the concrete.
Manufacturers of stainless steel anchor bolts also refer to these bolts as concrete anchor bolts because concrete makes up the majority of the medium in which they are employed. A resin epoxy, often known as RE, is a two-part chemical anchor, on the other hand. The worker will have more working time while using the anchor resin bolts for applications like deep embedments because this resin is made to set gradually. Although using m10 stainless steel anchor bolts does not make them impervious to failure, the likelihood of these fasteners failing is lower than it would be with other grades of bolts when they are used in conjunction with concrete applications.
| Description | Anchor Bolt Price in india |
|---|---|
| Carbon Steel Anchor Bolt with Nut, Zinc Plain/Hot DIP Galvanized | US $ 0.1-0.35 / Piece |
| Expansion Anchor Bolt, Sleeve Anchor Bolt, Wedge Anchor Bolt | US $ 0.043 / Piece |
| Inch Metric Building Anchor Bolts | US $ 0.1 / Piece |
| Fasteners/Anchors/Metal Frame Anchor/Hollow Wall Anchor/Zinc Plated | US $ 0.03-0.07 / Piece |
| Zinc Blue Plated Carbon Steel L Bolt | US $ 0.3-25.0 / Piece |
| Hot Dipped Galvanized Anchor Bolt | US $ 0.285 / Piece |
| Drop in Anchor with Grade 4.8 (M8) | US $ 0.029-0.042 / Piece |
| A2 A4 Stainless Steel Galvanized Drop in Anchor Expansion Anchor Bolt | US $ 0.04-0.2 / Piece |
| Galvanized Steel L Bolt, J Bolt, Foundation Bolt Anchor Bolt |
Min. Order: 10 Tons |
| standards of British | BS 57 |
|---|---|
| standards of ISO | ISO 10642 |
| Length | 3 millimeter- 200 millimeter |
| Size |
M16, M5, M33, (M3.5), (M45), M20, M42, M4, (M22), (M27), (M14), M6, (M18), M36, M48, M12, M2, M3, M10, M24, M30, M8 M160 and as per need |
| Standard: |
ASTM, ANSI , ISO, DIN, GB, JIS, BS, IS and all International Standards |
| Threads | BSW, METRIC, UNC, BSF, UNF or as per need |
| UTS | UNF, NPT, UNC, UNS, UNEF, NPTF |
| DIN Standard | B.S. DIN 931, DIN 933, DIN 912, DIN 934, DIN 6923, DIN 603, DIN 7981, DIN 970, DIN916, DIN 7982, DIN 7985, DIN 913 |
| Tolerance | +/- 00.01 millimeter to +/- 00.05 millimeter |
| Dimensions | ASME B18.6.3 **Exception: shorter are fully threaded and 6 inches screws |
| Type | Round/ Pan/ Truss head/ Hex Head/ Oval |
| Head | Phillips/Slot,Six-Lobe, Phillips, Slotted etc |
| Finishing |
|
| Head | flat head, Pan head, hex head, oval head, phillips head |
| process of Production | Cold Heading, Wire Drawing, Heat Treatment, Insert tapping, Inspection, Packing, Surface Plating |
| Finish | ASTM A380/A380M |
| Manufacturers | GKW, SPAX® Screws, Kundan, Unbrako, Sundaram Precision, APL, EBY Fastener , Infasco Etc. |
| treatment of Surface |
|
| Uses | Wind tower, Railway, Automotive industry, Nuclear power, Electronic industry, Construction |
| Certificate provided |
|
Diameter Range: M12 to M72 or ½”to 3”
| Thread Length | Anchor Dia. | Anchor Length | Anchor Hook Length |
|---|---|---|---|
| 1-3/4" | 3/8" | 6" | 1" |
| 1-3/4" | 3/8" | 8" | 1" |
| 1-3/4" | 1/2" | 6" | 1-1/2" |
| 1-3/4" | 1/2" | 8" | 1-1/2" |
| 1-3/4" | 1/2" | 10" | 1-1/2" |
| 1-3/4" | 1/2" | 12" | 1-1/2" |
| 2" | 1/2" | 14" | 1-1/2" |
| 2" | 1/2" | 16" | 1-1/2" |
| 2" | 1/2" | 18" | 1-1/2" |
| 2" | 5/8" | 8" | 2" |
| 3-3/4" | 5/8" | 10" | 2" |
| 3-3/4" | 5/8" | 12" | 2" |
| 3-3/4" | 5/8" | 14" | 3" |
| 4" | 5/8" | 18" | 3" |
| 3-3/4" | 3/4" | 12" | 3" |
| 3-3/4" | 3/4" | 15" | 3" |
| 3-3/4" | 3/4" | 16" | 3" |
| 4" | 3/4" | 18" | 3" |
| 4" | 3/4" | 24" | 3" |
| 4" | 1" | 12" | 4" |
| 4" | 1" | 18" | 4" |
| 4" | 1" | 24" | 4" |
| 6-1/4" | 1" | 36" | 4" |
In essence, Anchor Bolts offers a wide range of head styles. The design of the bolt head depends on its intended use. The screws' utility for the tools that will be used to fix them is the driving force behind these plans. For instance, sometimes a device is used specifically for the nut end and the screw heads are used to secure the fastener in one location. Every bolt has a different detail and strategy. Each bolt also has a secondary purpose for which it is planned.
| Length | Diameter | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 5⁄8" | 1⁄2" | 3⁄4" | 1" | 7⁄8" | 11⁄8" | 13⁄8 | 11⁄4" | 11⁄2 | |
| 11⁄4 | 31.03 | 17.08 | 49.06 | 104 | 74.04 | - | - | - | - |
| 1 | 29.04 | 16.05 | 47.00 | - | - | - | - | - | - |
| 13⁄4 | 35.03 | 20.05 | 55.03 | 114 | 81.09 | 154 | 261 | 205 | 333 |
| 11⁄2 | 33.01 | 19.02 | 52.02 | 109 | 78 | 148 | - | 197 | - |
| 21⁄4 | 39.08 | 23.03 | 61.06 | 124 | 90.03 | 167 | 279 | 220 | 355 |
| 2 | 37.04 | 21.09 | 58.04 | 119 | 86.01 | 160 | 270 | 212 | 344 |
| 23⁄4 | 43.09 | 26.01 | 67.08 | 135 | 98.08 | 181 | 300 | 237 | 379 |
| 21⁄2 | 41.07 | 24.07 | 64.07 | 130 | 94.06 | 174 | 290 | 229 | 366 |
| 31⁄4 | 48.02 | 28.08 | 74 | 146 | 107 | 195 | 321 | 255 | 403 |
| 3 | 46.01 | 27.04 | 70.09 | 141 | 103 | 188 | 310 | 246 | 391 |
| 33⁄4 | 52.05 | 31.06 | 80.02 | 157 | 116 | 209 | 342 | 272 | 428 |
| 31⁄2 | 50.04 | 30.02 | 77.01 | 151 | 111 | 202 | 332 | 263 | 416 |
| 41⁄4 | 56.09 | 34.03 | 86.04 | 168 | 124 | 223 | 363 | 289 | 453 |
| 4 | 54.07 | 33 | 83.03 | 162 | 120 | 216 | 353 | 280 | 441 |
| 43⁄4 | 61.02 | 37.01 | 92.07 | 179 | 133 | 237 | 384 | 306 | 478 |
| 41⁄2 | 59 | 35.07 | 89.05 | 173 | 128 | 230 | 374 | 298 | 465 |
| 51⁄4 | 65.05 | 39.09 | 98.09 | 190 | 141 | 251 | 405 | 324 | 503 |
| 5 | 63.03 | 38.05 | 95.08 | 184 | 137 | 244 | 395 | 315 | 490 |
| 53⁄4 | 69.08 | 42.06 | 105 | 201 | 150 | 265 | 426 | 341 | 527 |
| 51⁄2 | 67.07 | 41.02 | 102 | 196 | 146 | 258 | 416 | 332 | 515 |
| 61⁄4 | 74.01 | - | 111 | 212 | 158 | 279 | 447 | 358 | 552 |
| 6 | 71.09 | 44 | 108 | 207 | 154 | 272 | 437 | 349 | 540 |
| 63⁄4 | 78.05 | - | 118 | 223 | 167 | 293 | 468 | 375 | 577 |
| 61⁄2 | 76.03 | - | 114 | 218 | 163 | 286 | 458 | 367 | 565 |
| 71⁄4 | 82.08 | - | 124 | 234 | 175 | 307 | 489 | 392 | 602 |
| 7 | 80.06 | - | 121 | 229 | 171 | 300 | 479 | 384 | 589 |
| 73⁄4 | 87.01 | - | 130 | 246 | 183 | 321 | 510 | 410 | 626 |
| 71⁄2 | 84.09 | - | 127 | 240 | 179 | 314 | 500 | 401 | 614 |
| 9 | - | - | - | - | - | - | 563 | 453 | 689 |
| 81⁄4 | - | - | - | 257 | 192 | 335 | 531 | 427 | 651 |
| 8 | 89.02 | - | 133 | 251 | 187 | 328 | 521 | 418 | 639 |
| 83⁄4 | - | - | - | - | - | - | 552 | 444 | 676 |
| 81⁄2 | - | - | - | 262 | 196 | 342 | 542 | 435 | 664 |
| Per inch Adder |
8.06 | 5.05 | 12.04 | 22.01 | 16.09 | 28 | 42.05 | 34.04 | 49.07 |
Material |
Grades |
ASTM Standards |
|---|---|---|
Alloy Steel |
B 7/ B 7M, B 6, 2, B 16, 2H, 2HM, B 7, GR 6, B 7M |
ASTM A 194/193 / ASME SA 194/193 GR |
Nickel Alloy |
UNS 8020 (ALLOY 20 / 20 CB 3), UNS 4400 (MONEL 400), UNS 2200 (NICKEL 200) / UNS 2201 (NICKEL 201), UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601), UNS 8825 (INCONEL 825), UNS 10276 (HASTELLOY C 276), UNS 6625 (INCONEL 625) |
ASTM / ASME SB 164 /160 / 166 /425 / 574 / 446 / 472 |
Stainless Steel |
B 8C (SS 347), B 8 (304), B 8 T (SS 321), B 8M (SS 316), A 4, A 2 |
ASTM A 194/193 / ASME SA 194/193 |
Duplex Steel |
LENGTH: UPTO 5 METERS, size Range: M10 - M100 |
UNS NO. S32205, S31803 |
High-Temp Alloys |
19-9 DL, Discaloy, A286, 16-25-6, Nimonic 80, Titanium, Haynes 25, Mulitmet, Unitemp 252, Greek Ascalloy, Rene 41, Udimet 500, Inco 901, Inco 700, 235, Hastelloy X, RA 330, Waspaloy | |
Finish: |
Zinc Plating, Black Oxide, Hot Dip Galvanized | |
Trademarks: |
Armco, Carpenter, DuPont, Cabot, INCO | |
Nonmetallic Materials: |
Kel-F, Acrylic, Lexan, Poly Vinyl Chloride, Polypropylene, Zytel 31, 105, 101, Teflon | |
Aluminum Alloys: |
5052, 2024, 3003, 2011, 6061, 2014, 6053, 7075, 2017, 1100 | |
Copper Base Alloys |
Copper, Brasses: Free-cut, Yellow, Naval, Red, Bronze: Phosphor, Commercial, Aluminum, Silicon A & B, Manganese, Silicon-Aluminum, Munitz Metal, Ampco Alloys, Cupro-Nicles | |
| Material | Options | Ø (milimeter) |
Drill Bit (milimeter) |
L (milimeter) |
|---|---|---|---|---|
| Zinc | Anchor – Interior | 12 | 12 | 120 |
| Material | Options | L (milimeter) |
Ø (milimeter) |
Drill Bit (milimeter) |
|---|---|---|---|---|
| 316 | Anchor – Exterior | 120 | 12 | 12 |
| Diameter | Minimum Embedment | Hole Size | Bolt Diameter |
|---|---|---|---|
| 1/4" x 5/8" only | 1/2" | 1/4" | 3/16" |
| 1/4" | 1" | ||
| 5/16" | 1" | 5/16" | 1/4" |
| 3/8" | 1-1/4" | 3/8" | 5/16" |
| 1/2" | 1-1/2" | 1/2" | 3/8" |
| 5/8" x 3" or less | 2" | 5/8" | 1/2" |
| 5/8" x 4-1/4" or more | 3-1/2" | ||
| 3/4" x 2-1/2" only | 2" | 3/4" | 5/8" |
| 3/4" | 3-1/2" |
| Dammam -KSA, Philippines, Indonesia, Belgium | Fastener Inch Thread Antiskid Shark Fin Type Yellow Anchor Bolt |
| Qatar, Europe, France, Thailand | High Quality M16 M20 M30 Stainless Steel Wedge Anchor Bolt |
| Czechia, Thailand, Germany, Malaysia | HDG Zp Plain Finish, 4.8 8.8 Grade L/J/U/V Shape Anchor Bolt |
| Malaysia, Bangladesh, USA, Finland | DIN444 Inch Plain Swivel Eye Anchor Bolt with Nut |
| South Africa, Kuwait, Saudi Arabia (KSA), Brazil | OEM/ODM Expansion Shells for Concrete Anchor Bolt |
| Singapore, Bahrain, South Africa | 8.8 Grade Color-Zinc Expansion Anchor Bolts/ Expansion Bolt/Expansion Anchor Bolt with Hex Nut |
| Philippines, UK, Australia, Nigeria | Stainless Steel SS304 SS316 Anchor Bolt |
| Oman, Hong Kong, Malaysia, UAE | Turkey Type Yellow Zinc Anchor Bolt |
| Chile, Iran, Italy, Singapore | Stainless Steel Undercut Anchor Back Bolt |
| United Arab Emirates (UAE), Norway, Turkey, Malaysia | Carbon Stainless Brass Steel M27 Concrete Anchor Bolt with Hook |
| Netherlands, Russia, Malaysia, Dubai | Expansion Hollow Anchor Bolt for Steel Applications Anchor Bolts |
| Egypt, Mexico, Spain, UK | Expansion Anchor Bolt with Hex Nut J Type Anchor Bolts |
| United Kingdom -UK, Malaysia, Europe, UAE | Fasteners Carbon Steel Wedge Anchor Bolt White & Yellow Color Zinc Plated |
| UK, Poland, Canada, Ellington -United States | Chemical Stud Anchor Bolt with Hex Nut and Washer 5.8 Grade White Blue Zp |
| Philippines, Canada, Malaysia, Singapore | Stainless Steel 201 304, 316 Mechanical Granite Anchors Bolt |
| Europe, Romania, Japan, Malaysia | Stainless Steel Elevator Expansion Anchor Bolts |
| Sweden, Malaysia, Colombia, China | Anchor Bolts for Steel Products |
| Malaysia, Los Alamos -Mexico, Taiwan, Philippines | M10 Anchor Bolt Galvanized Steel Expansion Anchor Bolt |
| Singapore, NY 12203 (USA), South Korea, Malaysia | Galvanized or Black Shaft Anchor Bolts for Outdoor Street Light |
| Anchor Bolt Size (D x L x C x T) | Hot-Dip Galvanized Part # | Plain Finish Part # | |||
|---|---|---|---|---|---|
| Hook | Length | Thread | Diameter | ||
| 2 | 8 | 4 | 1⁄2 | 12358 | 12357 |
| 2 | 10 | 4 | 1⁄2 | 12030 | 12029 |
| 2 | 12 | 4 | 1⁄2 | 12619 | 12618 |
| 4 | 18 | 4 | 1⁄2 | 19579 | Made to Order |
| 2 | 8 | 4 | 5⁄8 | 17753 | 17752 |
| 2 | 10 | 4 | 5⁄8 | 17755 | 17754 |
| 3 | 12 | 4 | 5⁄8 | 17689 | 17735 |
| 4 | 18 | 6 | 5⁄8 | 17658 | Made to Order |
| 4 | 20 | 6 | 5⁄8 | 17982 | Made to Order |
| 3 | 6 | 4 | 3⁄4 | 14123 | 14122 |
| 3 | 8 | 4 | 3⁄4 | 16600 | 16599 |
| 3 | 10 | 4 | 3⁄4 | 16602 | 16601 |
| 4 | 12 | 4 | 3⁄4 | 16604 | 16603 |
| 4 | 14 | 6 | 3⁄4 | 18919 | 18918 |
| 4 | 15 | 6 | 3⁄4 | 15981 | 15980 |
| 4 | 16 | 6 | 3⁄4 | 18921 | 18920 |
| 4 | 18 | 6 | 3⁄4 | 15983 | 15982 |
| 4 | 18 | 7 | 3⁄4 | 17979 | Made to Order |
| 4 | 24 | 6 | 3⁄4 | 16630 | 16629 |
| 4 | 24 | 7 | 3⁄4 | 17970 | Made to Order |
| 4 | 30 | 6 | 3⁄4 | 15989 | Made to Order |
| 4 | 30 | 7 | 3⁄4 | 17981 | Made to Order |
| 4 | 36 | 7 | 3⁄4 | 19301 | Made to Order |
| 4 | 18 | 6 | 7⁄8 | 15985 | Made to Order |
| 4 | 12 | 4 | 1 | 19305 | 18930 |
| 4 | 18 | 6 | 1 | 15987 | 15986 |
| 4 | 24 | 6 | 1 | 19298 | 18933 |
| 4 | 36 | 6 | 1 | 15979 | 15978 |
| 4 | 36 | 7 | 1 | 17729 | Made to Order |
| 4 | 36 | 12 | 1 | 15976 | Made to Order |
| 6 | 32 | 7 | 11⁄4 | 17063 | Made to Order |
| 5 | 36 | 12 | 11⁄4 | 19594 | Made to Order |
| 6 | 42 | 7 | 11⁄4 | 17064 | Made to Order |
|
|
| Anchor Bolt Coating | |||||
|---|---|---|---|---|---|
Hot Dipped Galvanizing |
Passivation |
Oxidized |
Epoxy Coating |
Zinc Plating |
|
Electro Polished |
Teflon Coating |
Chrome Plating |
Mirror Buffed |
||
